844ca65a8f
cosmetic
2022-04-10 23:40:44 -04:00
17dca6f791
tabify
2022-04-10 23:40:44 -04:00
733cf12663
cleanup
2022-04-10 23:40:44 -04:00
17d7dca9ae
build ch32 in its own file
2022-04-10 23:40:44 -04:00
7c120ecb58
put ch32f1 in its own file
2022-04-10 23:40:44 -04:00
04eb33e039
rename to comply to naming scheme
2022-04-10 23:40:44 -04:00
e12939582c
revert function clones_probe
2022-04-10 23:40:44 -04:00
83e3d9c135
disable verification
2022-04-10 23:40:44 -04:00
a3feae60aa
cleanup tabs
2022-04-10 23:40:44 -04:00
fb216a2a98
tabify
2022-04-10 23:40:44 -04:00
9b23265dde
add support for ch32 flash write, it is a bit hackish
2022-04-10 23:40:44 -04:00
90d15e6633
add probe for ch32 + make room for other clones
2022-04-10 23:40:44 -04:00
be83c2861e
gdb_packet: Formatting cleanup
2022-03-31 14:11:38 -04:00
e424859ecb
gdb_main: Formatting cleanup
2022-03-31 14:03:29 -04:00
804a1a4f43
stm32f4: Attach logic cleanup by making sure we only set the extra bits needed when writing DBGMCU_CR
2022-03-31 13:46:29 -04:00
eed1cc81ff
STM32F4: Move DBGMCU_handling to target specific code. Apply for F4 too.
2022-03-31 13:43:52 -04:00
b59ca5142a
pc hosted: Don't try to report memory usage.
...
When building on a pc gcc does not have that parameter and clang fails
with an error. This caused a build regression on Mac.
2022-03-29 16:45:08 -07:00
a0c77e216d
adiv5_swdp: Changed the low-level access code to retry till timeout (partial revert of 61efe26)
...
Proper initialisation of the ack value also fixes a potential use-before-init UB
2022-03-29 15:33:23 -07:00
d9ef3ff147
adiv5_swdp: Formatting consistency cleanup
2022-03-29 15:33:23 -07:00
bba2bfdcf4
advi5: Raise the access timeouts as 20ms is too low in some cases
2022-03-29 15:33:23 -07:00
cedd9f9ac4
follow function naming scheme
2022-03-22 10:10:33 -04:00
9007c40954
revert temp patch on platform.h
2022-03-22 10:10:33 -04:00
8b52bbd9a9
fix unused var / naming
2022-03-22 10:10:33 -04:00
b82ee6bc90
prototype for gdb_putpacket2
2022-03-22 10:10:33 -04:00
8fb3b7b1a8
reuse exception to avoid using the stack
2022-03-22 10:10:33 -04:00
82c41cb739
add putpacket2 to send two sub messages merged as one
2022-03-22 10:10:33 -04:00
48c6db1963
Remove duplicate definition of USBUSART_DMA_TX_ISR
2022-03-22 10:02:52 -04:00
e82d4f2eda
native: Fixes an hw version issue with some older BMP.
...
The BMP with hardware version 4 and newer, use option bytes instead of
physical GPIO to encode the hardware version. In some older BMP there is
a chance that the user option byte is set to 255 (0x00FF pattern). This
can throw off the hardware version detection routine.
2022-03-15 23:45:32 -07:00
bcba3ee4a9
native: Fixed hw6 USBUSART support.
2022-03-15 23:45:32 -07:00
06f24d3269
native: Added blocks to the ISR templates.
2022-03-15 23:45:32 -07:00
bb761e4b38
native: Initial addition of hw 6 support.
2022-03-15 23:45:32 -07:00
2d63021344
native: Improved pinout legend comment block.
2022-03-15 23:45:32 -07:00
e7982d594e
native: Added HW5 AUX interface definitions.
2022-03-15 23:45:32 -07:00
655014ac9c
native: hw rev 5 has the usb vbus sense pin on PA15.
...
We had to move the pin to free up the SPI SCLK pin.
2022-03-15 23:45:32 -07:00
9ffa923bc1
native: Update hwversion detection for hw rev 4 and newer.
...
The hw rev 4 and 5 both have the version stored in the Data1 user option
byte. This frees up the hw rev strapping pins for other uses, ie swtrace
decoding using USART1 RX, and additional peripherals on the SPI bus,
like bulk flash storage and displays.
2022-03-15 23:45:32 -07:00
d259d5c511
build: Only build the locm3 libraries needed.
...
We don't need to build all the locm3 libraries. We just need those that
are required by the supported platforms.
2022-03-15 13:33:51 -07:00
488df7e6f7
sscanf cleanup in GDB Z packet handling function.
...
Tested working with arm-none-eabi-gcc 10.2.1
2022-03-15 13:18:00 -07:00
e0619ca7d5
Added a linker flag to output memory usage.
2022-03-15 11:41:31 -07:00
4b92415442
ghactions: Added libhidapi dependency installation.
2022-03-14 23:01:32 -07:00
501fd09228
ghactions: Added libftdi1 dependency installation.
2022-03-14 21:55:05 -07:00
0d97871893
The pull request github action now also builds hosted.
...
This will help catch some more build errors.
2022-03-14 21:46:15 -07:00
4fe8fd8944
samd: Fixed the hosted build as the code from #987 assumed unsigned long was 32-bit
2022-03-14 21:38:45 -07:00
e271c16f6c
Removal of MFR descriptions as requested in #978
2022-03-14 21:37:44 -07:00
c30e165c1c
crc32: Fix the launchpad-icdi build as that was broken
2022-03-14 21:37:44 -07:00
3bb8c2bf19
jtag_scan: Cleaned up the ones array to use a more correct syntax
2022-03-14 21:37:44 -07:00
75e786da11
jtag_devs: Added a few more parts based on 0170aff and cleaned up the description wording for the existing ones
2022-03-14 21:37:44 -07:00
23534ab174
target: Cleanup in target_new() for the check_error callback
2022-03-14 21:37:44 -07:00
361dc9c234
Revert "adiv5_swdp_scan: If SWD scan fails, try a JTAG scan."
...
This reverts commit 3df692ecb2
2022-03-14 21:37:44 -07:00
54f577a970
hosted/dap: Partial revert of 5c8e277, taking into account that division may not be available on platforms 'hosted' might see itself built
2022-03-14 21:37:44 -07:00
d1c9d94174
jtag_scan: Remove the now redundant IDCode parameter from the handlers
2022-03-14 21:37:44 -07:00
mean
dragonmux
Uwe Bonnes
Piotr Esden-Tempski
Mike Ditto
Fabrice Prost-Boucle