3e3e450408
cdcacm.c: Use less buffer for the usb_uart buffers and reallocate.
...
With 128 bytes for both usb_uart buffers, traceswo gives errors!
Keep the size for the receive buffer and diminisch the transmit buffer,
as there is no flow control to the device.
Probably related to https://github.com/libopencm3/libopencm3/issues/477
2018-03-27 13:40:49 +02:00
cfaa5ea963
Merge branch 'korken89-master'
2018-03-27 13:01:06 +13:00
76bfb4929d
Use lowercase register names.
2018-03-27 13:00:39 +13:00
90f7bdcd09
Merge branch 'konsgn-master'
2018-03-27 08:08:02 +13:00
a3f855ce5c
Merge branch 'master' of https://github.com/konsgn/blackmagic into konsgn-master
2018-03-27 08:03:03 +13:00
31965a5bbc
Added support for k64 ( #301 )
2018-03-25 14:43:33 -07:00
471ce2547c
Added LPC17xx support ( #317 )
2018-03-25 12:53:30 -07:00
a41d8cb97a
Another nRF52 device id. ( #315 )
2018-03-25 12:37:51 -07:00
0c659f49cd
Merge pull request #322 from jrwhite/master
...
hexprog.hex fails due to divide-by-zero
2018-03-25 12:35:52 -07:00
1ee6d4503e
Update to split 'special' into its sane parts (update from @mubes)
2018-03-24 16:44:59 +01:00
0ddd8b55d7
divide-by-zero fix
2018-03-11 14:35:38 -05:00
04fbabb299
mkl27 support
2018-01-21 23:43:01 -05:00
1fe870b8df
added MKL27<128kB support
2018-01-16 13:23:36 -05:00
a9219c3616
Merge pull request #314 from adamheinrich/usbuart-ignore-noise
...
platforms/stm32: Ignore noise errors on USBUART
2018-01-15 08:29:18 +13:00
f5cac4c78d
platforms/stm32: Ignore noise errors on USBUART
2018-01-13 21:11:17 +01:00
dd055b675e
Merge pull request #313 from UweBonnes/stm32f3_ccm
...
stm32f1.c: Add missing fall through statement needed by GCC7.
2017-12-18 10:33:08 -08:00
922f857de7
stm32f1.c: Add missing fall through statement needed by GCC7.
2017-12-18 13:56:59 +01:00
a3484e3d3b
Merge pull request #311 from UweBonnes/f3_ccm
...
stm32f1.c: Export CCM RAM of F303.
2017-12-12 14:49:21 -08:00
1f3c235205
src/target/stm32f1.c: Add CCM Ram of STM32F303 devices.
2017-12-08 13:39:24 +01:00
568655063f
Merge pull request #300 from gsmcmullin/m7-cache
...
Cache support for Cortex-M7
2017-11-07 08:44:56 +13:00
c53a12bfd1
cortexm: Better cache support for Cortex-M7
...
- On probe, read CTR for cache presence and minimum line length
- Make D-Cache clean a function
- Clean before memory reads
- Clean and invalidate before memory writes
- Flush all I-Cache before resume
2017-10-12 09:26:01 +13:00
0e5b3ab00e
Make Cortex M driver write DCCIMVAC (Data cache clean and invalidate by address to the PoC=Point of Coherency) prior to reading or writing each 32 bytes of RAM
2017-10-12 08:41:58 +13:00
9a5b31c37b
Fix fallthrough warnings on gcc 7
2017-10-09 11:07:29 +13:00
231d42d581
Merge pull request #297 from UweBonnes/write_size
...
target: Fix calculation of erase size.
2017-10-06 19:40:02 +13:00
120a2d9378
target: Fix calculation of erase size.
2017-10-05 22:11:01 +02:00
5950d8f56c
Merge pull request #293 from UweBonnes/write_size
...
target: Fix wrong size calculation for write.
2017-10-05 09:07:18 +13:00
ed8366813d
Merge pull request #294 from UweBonnes/stm32_mem
...
stm32_mem: Really wait 5 seconds for DFU device to appear.
2017-10-05 09:03:09 +13:00
dc29e45606
stm32_mem: Really wait 5 seconds for DFU device to appear.
2017-10-04 21:53:53 +02:00
a7815fff3d
target.c: No need to split write while still in same flash block.
2017-10-04 21:52:29 +02:00
25610e5ec5
target: Fix unconsistant use of tmplen.
2017-10-04 21:52:29 +02:00
72c86f939e
Merge pull request #296 from gsmcmullin/libftdi_tdi_tdo_fix
...
libftdi: Fix tdi_tdo_seq result unpacking
2017-10-05 08:32:08 +13:00
f27f3bad5c
libftdi: Fix tdi_tdo_seq result unpacking
2017-10-05 08:26:33 +13:00
2db42ba8e5
Merge pull request #287 from gsmcmullin/update_libopencm3
...
Update libopencm3
2017-10-04 10:58:44 +13:00
19e58a7205
Merge pull request #284 from UweBonnes/stm32_mem
...
stm32_mem.py: Print longer strings and small formatting changes.
2017-10-03 10:41:04 +13:00
2b2b6d8f31
stm32_mem.py: Allow to set start address.
2017-10-02 21:30:56 +02:00
7cc9ee9d7a
stm32_mem.py: Verify after write when bootloader supports upload
...
This should help people using STM32F103C8 above 64 k.
2017-10-02 21:30:56 +02:00
613208c939
stm32_mem: Allow to switch from dfu to application without flashing.
2017-10-02 21:30:56 +02:00
c41dfaef9a
stm32_mem.py: Run automatically after switching to DFU mode.
2017-10-02 21:30:56 +02:00
4f3f4cb898
stm32_mem.py: Deny to work with the STM DFU bootloader
...
To support the STM DFU bootloader, the interface descriptor needs to be
evaluated. Erase may only be called once per sector.
2017-10-02 21:30:56 +02:00
4c6f735452
stm32_mem.py: Handle multiple devices.
2017-10-02 21:30:56 +02:00
eb7547111a
Merge pull request #285 from UweBonnes/f4_rework
...
F4 rework
2017-10-03 07:23:52 +13:00
0aa47113f3
stm32f4: Fix F4 dual bank OPTCR1 to option byte mapping.
2017-10-02 16:22:14 +02:00
c4d3712b39
stm32f4.c: Rework flash structure recognition.
...
Dual bank devices do not have sectors (8)12..15 !
Dual banks devices need to MER1 set for mass erase.
F72x has different FLASHSIZE_BASE
2017-10-02 16:22:14 +02:00
0ed66547d5
Fix libopencm3 breakage
2017-09-25 11:17:03 +13:00
f345cd24dc
Update libopencm3 pointer
2017-09-25 10:04:05 +13:00
ad71db05b9
Merge pull request #283 from UweBonnes/rdi
...
Make ENABLE_DEBUG infrastucture available and use for st- and swlink
2017-09-25 08:12:23 +13:00
4966168802
s[t|w]link: Implement ENABLE_DEBUG.
2017-09-23 16:40:28 +02:00
ce1ef6e41b
stm32: Move rdi handling to common stm32 code.
2017-09-23 16:39:35 +02:00
98ab873784
Merge pull request #281 from UweBonnes/nucleo144
...
stlink: Use common initialization and detect V2.1 boards.
2017-09-23 10:36:46 +12:00
203f6702d8
Flashsize_F103: Options for BMP on STM32F103C8 devices
2017-09-21 23:05:20 +02:00
Uwe Bonnes
Gareth McMullin
Christopher Woodall
Akila Ravihansa Perera
Mark Rages
Emil Fresk
jrwhite
Konsgn
Adam Heinrich
Nick Downing