82bca86806
platform: Renamed cdcacm_init -> blackmagic_usb_init
2022-08-12 22:25:52 -07:00
3e9913e88b
Implement semihosting debug output redirection to usb-uart port.
2022-07-13 18:49:20 -07:00
12fefa73c9
platforms: Cleaned up and fixed many markdown lint errors, improving the formatting of many of the platform README's
2022-06-26 16:51:58 -07:00
5edf549b48
misc: Updated comments and READMEs to properly reflect pinouts and function
2022-06-26 16:51:58 -07:00
2eaa579965
platforms: NRST and TRST naming consistency
...
This aligns the nRST and nTRST pin naming with the bulk of the README's for the platforms along with the hardware
2022-06-26 16:51:58 -07:00
a8e12d716d
misc: Renamed platform_nrst_{get,set}_val to clarify naming and provide consistency
2022-06-26 16:51:58 -07:00
6656284728
added RTS and DTR to UART interface
2022-06-03 18:22:08 -04:00
9007c40954
revert temp patch on platform.h
2022-03-22 10:10:33 -04:00
82c41cb739
add putpacket2 to send two sub messages merged as one
2022-03-22 10:10:33 -04:00
ed156076a2
swlink README: correct SWO/RX2 header location for blue pill
2022-01-30 11:48:12 +01:00
1330288271
firmware: Unify serial number handling
...
Use one file in dfu and server
For STM32, provide 3 ways to handle
- BMP way (8 bytes)
- DFU way (12 Bytes)
- Full unique id (24 Bytes), as with STLINK(V3) Bootloader
2021-04-25 16:02:20 +02:00
21b80949ff
Compile with -Os as default. Change like "make OPT_FLAGS=..."
...
SWD/JTAG Bitbang is compiled with -O3 for good bitbang speed.
2021-04-20 18:20:41 +02:00
806787529f
Use DMA for USBUSART TX/RX
2021-04-17 17:57:08 +02:00
98b4ec58bc
Update to recent libopencm3 to undo unwanted change.
2020-12-07 21:51:22 +01:00
07c3699225
version.h: Remove from platform.h files
...
- Consolidate ident string generation
- Recompile only needed files
2020-12-06 15:18:08 +01:00
636bcee355
stlink/swlink: Remove the DFU upgrade utility.
...
Hopefully no old bootloaders are around. If otherwise, revert to last
commit before this and update the DFU bootloader.
2020-11-27 22:26:48 +01:00
f71e18948a
GPIO for SWD: Slow down edges on more platforms.
2020-11-27 22:26:48 +01:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
a09104c281
Build firmware executables as *.elf file
2020-06-05 14:59:30 +02:00
541861e978
traceswo decoding
2020-05-16 15:04:35 +02:00
805464db23
Fix redefinition of io function
...
Now it should work fine with any gcc version. Old one produces error
like in #657
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-10 10:58:03 +02:00
1924aa4999
Make baudrate parameter of traceswo command mandatory for stlink/swlink, and superfluous on other platforms; change help message accordingly.
2019-11-19 20:20:13 +01:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
d8b01ff61f
swlink: Enable UART2 for SWO.
...
Stlink on STM8S-Disco needs additional wiring for SWO.
2018-10-03 15:19:33 -07:00
7cafc44bd9
swlink: Allow to enable debug on second VCOM.
2018-10-03 15:19:33 -07:00
0d246fb31a
swlink: Measure voltage on VDD pin of Stlink/Stm8s.
2018-10-03 15:19:33 -07:00
184ef991bf
swlink: Handle LED.
2018-10-03 15:19:33 -07:00
06272e0a59
swlink: Implement dfu_upgrade.
2018-10-03 15:19:33 -07:00
530d1e5c28
swlink: Handle force boot on bluepill.
2018-10-03 15:19:33 -07:00
b744d8b0c9
swlink: Implement NRST.
2018-10-03 15:19:33 -07:00
1263d185a6
swlink: Distinguish between Stlink on STM8-Disco and "blue pill".
2018-10-03 15:19:33 -07:00
7a7266a0f7
Speed up JTAG.
2018-06-26 19:50:14 +02:00
59e03dea27
Keep TMS floating until scanning.
...
NRF5x shares nRST with SWDIO and otherwise does not run until scan is done.
2018-06-26 19:50:14 +02:00
97561fc5cc
stlink: Decrease delay with SWD turn around for native,stlink and swlink.
2018-06-26 19:50:14 +02:00
0ed66547d5
Fix libopencm3 breakage
2017-09-25 11:17:03 +13:00
4966168802
s[t|w]link: Implement ENABLE_DEBUG.
2017-09-23 16:40:28 +02:00
2eb2f8edd7
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-09 13:07:06 +12:00
a7771fa23f
stlink/swlink: Remove missleading comments.
2017-06-08 18:25:43 +02:00
b09a522f37
STM32F103: Use flash size from device for DFU string.
...
Complements #204 .
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
2017-05-07 13:19:37 +02:00
8b4342394f
Overhaul of timeouts so they may be nested.
2016-06-28 14:35:43 +12:00
cd1d72257f
Cleanup of SRST handling.
...
- Remove connect_assert_srst global.
- Attach functions always release reset.
- Platforms provide a method to poll the reset pin.
- Reset on scan is all internal to command.c
- Reset is released on a failed scan. Fixes #111
2016-04-19 13:12:16 -07:00
c0f92ea5a7
Merge pull request #116 from esden/flashier_dfu
...
[native] Make the native bootloader bit more flashy.
2016-03-09 10:26:56 +13:00
c0c8bade6f
[native] Make the native bootloader bit more flashy.
...
This change has also a practical reason. When flashing and testing the
hardware this change makes it easier to make sure all the LEDs work. Now
when the DFU bootloader is idle it is scanning the LEDs making it easy
to see if one of them has an issue.
In addition to that, the bootloader now indicates when there is data
being flashed using the DFU interface. In cases when one has more than
one device connected and accidently starts flashing a wrong device this
is very useful feature to have.
2016-02-14 23:47:57 -08:00
b7e5005679
[native] Check for hardware version by pull-up and -down. Print HW Version in mon command.
...
Until now the native hardware was pulling PB5-7 down and checking if
they were asserted high. BMPMV2b is pulling the pins down instead of
high. The hardware version routine now determines the hardware version
based on the fact if a pin is asserted at all. This means that if a pin
is left floating, the version number bit will be 0, and if the pin is
asserted either high or low the bit will be set to 1. While we were
already at it the "monitor version" command in GDB will now also print
the hardware version number.
2016-02-14 22:49:29 -08:00
600f0d27d9
Use sniprintf on newlib platforms.
2015-11-11 12:41:13 -08:00
482070c91b
Merge branch 'v1.6-branch'
...
Conflicts:
src/Makefile
src/platforms/stlink/platform.h
src/platforms/swlink/platform.h
2015-04-03 21:02:01 -07:00
97824b7f02
Use git describe for version in generated header file.
2015-04-03 20:21:33 -07:00
dragonmux
Anti Sullin
cyber-murmel
mean
Paul Mulders
Uwe Bonnes
Vestrel
Raghu
Koen De Vleeschauwer
Alexey 'Alexxy' Shvetsov
Thiadmer Riemersma
Gareth McMullin
Piotr Esden-Tempski