5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
286b987822
Merge pull request #527 from UweBonnes/fixes
...
Fixes
2019-09-29 16:59:54 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
fc3abf26ef
stm32_mem: Fix native crashing in dfu-detach when repeatedly flashed.
2019-09-28 21:28:35 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
71b8a4e081
Merge pull request #511 from UweBonnes/pc-stlinkv2
...
Pc stlinkv2
2019-09-01 13:07:35 +02:00
1d868bfffb
pc-stlinkv2: Detect stlink detach.
...
As libusb has no real async callback, we need to call libusb_handle_events()
in different places. While waiting for the gdb connection, we set the
socket to non-blocking and check additional for usb events in that loop. That
way, detach is also detected while waiting for connection. With debugger
attached, SET_IDLE_STATE ist missused for checking for usb events.
2019-09-01 12:19:14 +02:00
6f1cae9203
pc-stlinkv2: Wait for device attach.
2019-09-01 12:19:07 +02:00
86d0be9708
pc-hosted: Display morse message on controlling terminal.
2019-09-01 12:11:51 +02:00
80a9fd51ca
Clarify STM32F103x8 Flashsize handling.
...
Should finally fix #471 .
2019-09-01 12:11:51 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
d1ee827b4d
pc-stlinkv2: STLINK_SWD_DP_ERROR seem unrecoverable. Throw exception.
2019-08-31 11:20:17 +02:00
0d61106f90
pc-stlinkv2: Remove redundant read of CoreID.
2019-08-31 11:20:17 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
a01109543e
pc-stlinkv2: Return failure if STLINK_DEBUG_APIV2_INIT_AP fails.
2019-08-31 11:20:17 +02:00
d994565f2e
pc-stlinkv2: Fix crash with serial given not matching connected devices.
2019-08-31 11:19:13 +02:00
052b5f830a
Made script executable with python3.
...
Added braces for compatibility with python3, should still be valid python2 which interpretes these braces as a tuple with a single element and simplifies it to that element.
Replaced whitespaces with tabs as required by python3, since indentation must be uniform (either whitespaces or tabs).
Removed trailing whitespaces.
Tested by flashing various STM32 boards with blackmagic firmware using python3.7.
2019-08-30 15:09:35 +02:00
5704c2fb5a
Merge pull request #508 from UweBonnes/swlink
...
swlink: Remove redundant conditional usbart_init().
2019-08-28 12:37:12 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
35cb4e51e4
Windows Build Fixes GNU make 4.2.1 ( #502 )
...
After update of GNU make the tests for Windows OS are no longer needed. Note that GNU make 4.2.1 is used to build BMP under Windows OS.
Make native working
Again, the newer version of GCC make does not need the OS tests.
2019-08-28 10:45:41 +02:00
e8bd066fe9
Merge pull request #505 from UweBonnes/pc-stlinkv2
...
Pc stlinkv2
2019-08-27 15:23:18 +02:00
5d59338de5
pc-stlinkv2: Try first to reset device if we read a strange version number.
2019-08-27 15:13:26 +02:00
44f471db53
pc-stlinkv2: READMEM_8BIT needs to read 2 bytes for 1 byte requested.
...
Fix as seen in openocd.
SYSROM_PIDR2 has only 3 bits for the JEP106 identity code field, bits [6:4].
2019-08-27 15:13:26 +02:00
82be49f052
Stlink: Add a README.md, mostly deprecating reflashing Stlinkv2/1.
2019-08-27 15:13:26 +02:00
5fbb3a44fd
PC-STLINKV2/Libftdi: Better version string.
2019-08-27 15:13:26 +02:00
fa27649f87
Remove debug_bmp command on PC hosted platforms.
2019-08-27 15:13:26 +02:00
6bf4fd3598
pc-stlinkv2: CPU register read and write must be done with the AP set.
...
FIXME: Writing CPU registers on M4 of STM32H745 seems not to work.
2019-08-27 15:13:15 +02:00
ebf3e9da04
Changed the Gitter chat link to Discord.
2019-08-26 17:22:02 -07:00
e52e2f56c5
Merge pull request #500 from btashton/update_libopencm3
...
Target latest libopencm3 version
2019-08-15 10:16:13 +02:00
443ced62d4
Target latest libopencm3
...
Required fixes:
* use usbd_request_return_codes -- commit 54b117c5a5767df8dc114612dfd8e8cb88b72c6b
* drop deprecated timer_reset() -- commit 034dbf20ff8c54dcbee5238390b37a0d35180f44
* drop 48 & 120 MHz configs -- commit a9dde2832eb8039b9e0d21a50b9b991ddbfc4e2d
* ld scripts: drop duplication of standard sections -- commit 9a05dcb6c0aef712052d337457838f6041ffd57a
2019-08-14 00:57:15 -07:00
c9c8b089f7
Merge pull request #499 from smunaut/minor_enhancements
...
Minor enhancements
2019-08-13 19:58:26 +02:00
4289788e0b
src: Replace sprintf with snprintf
...
snprintf is needed anyway, that's one less function to have :p
And it's bad practice anyway.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:43:33 +02:00
1d4152a36f
target: Make sure variant_string is consistent in size
...
It's a global symbol and LTO will complain if the one in this file and
the one in EFM32 target are inconsistent.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:42:29 +02:00
Ken Healy
Dave Marples
Uwe Bonnes
Gareth McMullin
Theodor M
Sid Price
Piotr Esden-Tempski
Brennan Ashton
Sylvain Munaut
