24ffef7175
stm32/serialno: Cleaned up the serial number handling code which is tripping GCC 11 up due to a compiler regression
2022-06-12 16:18:39 -07:00
b4131ef637
driver: Written a README.md to explain the purpose of each of the files and under what situation each should be used
2022-06-12 16:07:07 -07:00
8baf1e73c5
driver/udev: Fixed a couple of other small issues with the rules
2022-06-12 16:07:07 -07:00
32c62fdd3b
driver/udev: Fixed a small typo in the uucp rules
2022-06-12 16:07:07 -07:00
6ae884741f
driver/udev: Created a set of rules for group uucp systems
2022-06-12 16:07:07 -07:00
d938f2b839
driver/udev: Renamed the current rules so we can have a set for uucp systems co-exisitng
2022-06-12 16:07:07 -07:00
3bc38f1a9b
driver/udev: Fixed up the rules to correctly target the device and set the group for plugdev systems
2022-06-12 16:07:07 -07:00
1a316c5a2f
platforms/f3: moved the linker script and fixed the build system
...
We need build the right libopencm3 library which is not done by default, so this adds an extra build step for it
2022-06-12 15:58:11 -07:00
ef5cfd829f
platforms/f3: updated the platform definition
2022-06-12 15:58:11 -07:00
55a3132d1c
platforms/f3: Introduced a new platform for the STM32F3 series
2022-06-12 15:58:11 -07:00
af48a343a8
rp: Add description for SPI flash commands
2022-06-11 11:54:34 -04:00
b43b9a6545
rp: Add erase_sector to command list
...
The command can be used either by specifying the length only, or
the start address and the length like so:
monitor erase_sector <length>
monitor erase_sector <start_addr> <length>
If no start address is specified, it will begin erasing from the
start of the flash sector.
2022-06-11 11:54:34 -04:00
53672f1fc3
rp: Remove CHIP_ERASE command from rp_flash_erase
...
There seems to be a bug in the bootrom for the rp2040 which means
that the chip erase command is not accepted. This is because the
CS pin must be released (set high) directly after sending the chip
erase command (0x60 or 0xC7) (see Winbond W25Q128JV datasheet for
details). Instead the bootrom sends the address after the command,
thus the SPI flash silently ignores the command. Instead, we must
erase each 64KB block one at a time, but thankfull the bootrom
handles this correctly for us.
2022-06-11 11:54:34 -04:00
b1694dfab9
rp: Always use maximum flash size (16MB) when defining flash region
...
There are some cases when the this old method for finding the flash
size will fail, such as if the flash chip has been erased with 0xFF
bytes (rather than blank 0x00 bytes). As this is unreliable,
setting the wrong flash size could cause problems when trying to
inspect memory regions which appear to be out of range.
2022-06-11 11:54:34 -04:00
203c5149e7
rp: Add CORTEXM_TOPT_INHIBIT_SRST to target_options
2022-06-11 11:54:34 -04:00
4ec68023af
cortex-a: Fix compiling for native probe
2022-06-09 04:13:12 -04:00
483e51dce1
hosted/bmp_libusb: Further cleanup to the main bmp_ident string
2022-06-04 18:49:02 -07:00
19c2e56f13
hosted/cli: Cleaned up the information print out code so we only make one call for the whole thing
2022-06-04 18:49:02 -07:00
af0d597fb0
hosted/bmp_libusb: Cleaned up the bmp_ident code further
2022-06-04 18:49:02 -07:00
a87afbd3d3
Added the ZSH completions we wrote in preparation for this help output rewrite
2022-06-04 18:49:02 -07:00
958a6d1a20
hosted: Switched the `bmp_ident` output and printing method from stderr to stdout
2022-06-04 18:49:02 -07:00
74d6c676bb
hosted: Rewrote the main usage help text
...
Rewritten with better descriptions of what options do,
cleaner option groupings and infomraation on option mutual exclusivity
2022-06-04 18:49:02 -07:00
3ccb0af21c
blackpillv2: Renamed blackpill to blackpillv2 to prevent ambiguity.
...
There is also such a thing as blackpill, that uses stm32f1 instead of
stm32f4. At some point we might get support for the original blackpill
and it will force us to change the name then.
2022-06-04 01:31:27 -04:00
e8fc418f47
blackpill: Added missing newline at the end of the platform.c file.
2022-06-04 01:31:27 -04:00
d55bfd8948
Added BlackPillV2 platform.
...
This was extracted from f4 platform to allow for easier build testing of
supported platforms.
2022-06-04 01:31:27 -04:00
fcdd93e008
Removed BlackPillV2 platform variant from the f4 discovery.
...
Combined platforms make it hard to do build testing, it is better to
have duplicate code and be able test all variants.
2022-06-04 01:31:27 -04:00
2624960422
96b_carbon: Updated the IRQ priority comment.
2022-06-03 20:35:51 -07:00
1861ccd155
96b_carbon: Corrected the linker script.
2022-06-03 20:35:51 -07:00
d91112e0d6
96b_carbon: Updated so that it compiles in the current codebase.
2022-06-03 20:35:51 -07:00
9730ae1429
build: Corrected the all_platform build target.
...
The target was building but not including the BMDA binary, as the
build system does not expect a binary that does not end with `.bin`.
Additionally this corrects the BMDA Makefile.inc that was missing the
`all` and `host_clean` targets.
2022-06-03 22:42:05 -04:00
6e91aa509c
github: Accounting for the fact that all_platforms builds BMDA too.
2022-06-03 18:11:02 -07:00
91475c775c
github: Fixed a step description
2022-06-03 17:57:07 -07:00
2ab1c20f16
github: Switched to all_platforms firmware target.
2022-06-03 17:47:52 -07:00
f97047b5f5
build: Added all_platforms target to toplevel Makefile
...
The src level all_platforms target now also checks for locm3 existence
as well as triggers build of the needed locm3 libraries.
2022-06-03 20:40:35 -04:00
6656284728
added RTS and DTR to UART interface
2022-06-03 18:22:08 -04:00
7dc01e96e8
Complete the version string migration from 5e3cade, fixing HOSTED_BMP_ONLY
2022-06-03 14:42:18 -07:00
f6edb54395
Fix RP2040 memory sizes.
2022-06-01 11:41:58 -04:00
039bf14761
rtt: Cleanup and fixes for the RTT over serial support as per #954
2022-05-31 22:24:59 -04:00
8bf3eb0c6d
misc: Cleaned up in the BMP udev rules
2022-05-31 22:09:45 -04:00
2914be1a67
cortexa: Fix the new Watchpoint support causing a no-build
2022-05-31 22:03:21 -04:00
0b7dd00c77
cortexa: Indicate watchpoint as stop reason if there is only one.
2022-05-31 21:58:51 -04:00
b5ef9e5bcf
Implement watchpoints on Cortex-A
2022-05-31 21:58:51 -04:00
1aadcf2678
target/samx7x: handle tcm reconfiguration
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
dcc450a494
target/sam3x: rework gpnvm command
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
cf6ce32371
target: split mem_map_free into ram_map_free and flash_map_free
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-05-31 21:48:54 -04:00
8462f5e0d4
target/samx7x: handle tcm config on probe
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-05-31 21:48:54 -04:00
508b8d90cc
target/sam3x: name changes to reflect multiple supported families
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
430d306511
target: add samx7x probe method
...
adds support for SAME70, SAMS70, SAMV71 and SAMV70
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
e3142ade8c
add blackmagic package itself
2022-05-31 21:39:16 -04:00
8e0928cdba
add shell.nix
2022-05-31 21:39:16 -04:00
dragonmux
Uwe Bonnes
James Turton
Piotr Esden-Tempski
cyber-murmel
Mikaela Szekely
Dag Ågren
Gareth McMullin
Rafael Silva
Rafael Silva