0fc635b3f8
Add functions for dynamically generating the XML memory map.
2015-04-03 21:18:16 -07:00
482070c91b
Merge branch 'v1.6-branch'
...
Conflicts:
src/Makefile
src/platforms/stlink/platform.h
src/platforms/swlink/platform.h
2015-04-03 21:02:01 -07:00
97824b7f02
Use git describe for version in generated header file.
2015-04-03 20:21:33 -07:00
68f54a3545
Remove old platform specific error handling macros.
2015-03-22 14:06:56 -07:00
fa046601a5
Add exception handling mechanism and raise exception on low-level comms failure.
2015-03-22 12:26:45 -07:00
0d99e22a26
Quieten build system.
2015-03-07 11:03:50 -08:00
1eac78b1c8
Move targets to make bin and hex files to toplevel makefile.
2015-03-07 11:03:50 -08:00
3e466f2d23
Factor out timing routines common to all STM32 targets.
2015-03-02 21:59:04 -08:00
b07ffffcee
Factor out common cdcacm.c from stm32 and tm4c.
...
Cleaned up interface to enter bootloader and read serial number.
2015-03-02 10:16:33 -08:00
4d4813de87
Clean up includes everywhere.
...
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
2015-03-01 22:16:04 -08:00
476f83b69a
Move common USB stuff out of platform header files.
2015-02-28 22:48:26 -08:00
5eff0ab5d6
Factor out common GPIO code in STM32 platforms.
2015-02-28 22:09:50 -08:00
75001a4421
Factor Morse code functions out of platform code.
2015-02-28 22:05:10 -08:00
5d136398e1
Use sensible return convention for platform_target_get_power()
2015-02-28 21:23:24 -08:00
a5549d630c
Whitespace cleanup.
2014-10-16 13:50:56 -07:00
8a32b46f65
Fix build for non-native targets.
2014-08-08 20:22:33 +12:00
bfe5d1168b
Merge pull request #47 from richardeoin/target-power
...
Added monitor option to toggle target power
2014-07-30 14:19:46 +12:00
42e41edfa1
Target power option is only for versions > 0
2014-05-28 12:33:43 +01:00
c9089f5851
Added monitor option to toggle target power
2014-05-28 12:25:48 +01:00
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
12aeaad441
[locm3] Use the new clock-enabling mechanisms in locm3.
2014-02-13 18:21:16 +01:00
0c9d5d8166
Add dfu bootloader update application and use absolute delay for stlink
...
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30 )
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
2014-01-24 04:59:09 +08:00
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
8835df1822
Merge remote-tracking branch 'origin/usbuart_highrate'
2013-12-04 16:16:08 +13:00
c395c6f73a
Configure SRST output as open-drain for BMP Mini hardware
2013-10-05 13:14:03 +08:00
40820a2354
Added internal pull-up to PWR_BR.
...
o Prevent probe from inadvertently powering target. If PWR_BR is
allowed to float, the gate on Q1 (blackmagic_mini) will tend to be
close enough to zero to turn the transistor on. We activate the
internal pull-up on this IO pin to force the transistor off.
2013-10-05 13:14:03 +08:00
c28350f242
FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new library
...
The use of u8, u16, u32 has been deprecated in libopencm3.
Update it with standard uint8_t, uint16_t, uint32_t types
2013-10-05 12:23:23 +08:00
700833f38f
Use do {...} while(0) for PLATFORM_FATAL_ERROR() macro.
2013-08-19 12:27:36 +12:00
27a86e244f
native: Enable hard SRST signal.
2013-06-19 19:21:49 +12:00
8c877d6dfa
Fix trailing whitespace everywhere.
2013-06-17 15:53:32 +12:00
43f7e7a3cf
Changes to the USBUART to make it less likely to drop characters at higher baud rates.
...
USB UART seems to work fine at 115.2Kbps or 230.4Kbps, but starts to drop characters
as the data rate goes higher. This commit changes the usbuart ISR to fill a software
FIFO, and adds a low priority timer interrupt to run deferred processing to drain a
FIFO and send USB CDCACM packets, rather than calling the usb send within the UART
ISR.
Tested on native platform, up to 1.5MBps.
2013-04-27 12:56:58 -07:00
126df7bb35
Allow extra LDFLAGS on command line. Use nano.specs for swlink.
2013-04-16 16:47:38 -07:00
45e02360b7
native: Fix up deprecated warnings.
2013-04-16 12:47:29 -07:00
91b481731d
stm32f1/stm32f4: fix hardware CRC calculation
...
This was real-life tested on stm32f1 hardware including computation
for odd-sized ranges.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:35:23 -07:00
d4411fc51f
Removed verison info from USB strings on native platform.
2013-03-31 12:18:11 -07:00
7c2e994381
Split out platform specific bootloader parts to separate files.
2013-03-12 19:04:10 +13:00
55f161208d
Further split-up of DFU bootloader.
2013-03-12 15:00:15 +13:00
96ae3886ff
stm32:cdcacm/usbdfu: Print version and build information in the product string
2013-01-25 13:01:57 +01:00
1fa961841d
Product and DFU String now tell the hardware they run on
2013-01-21 11:02:44 +01:00
8b1ec3151f
usbuart, jtagtap, swdptap: Factor out GPIO setup
2013-01-21 11:02:44 +01:00
15d7077115
traceswo: Move (now-constant) traceswo.c to platforms/stm32
2013-01-21 11:02:44 +01:00
09715e1db8
traceswo: factor out platform dependant parts
2013-01-21 11:02:44 +01:00
1eb9bfc650
platforms/stm32: Move more platform dependencies to platform.h
2013-01-21 11:02:43 +01:00
30d8aa1eb7
Move (now-constant) cdcacm.c to platforms/stm32
2013-01-21 11:02:43 +01:00
04415582bd
cdcacm: move non-constant parts to platform.[hc]
2013-01-21 11:02:43 +01:00
533608a2f4
Move usbuart to the stm32 directory
2013-01-21 11:02:43 +01:00
7188a4a8cb
Move usbdfu to platforms/stm32 directory
2013-01-21 11:02:43 +01:00
35d6adc236
native/usbuart: Move platform dependant parts to platform.h
2013-01-21 11:02:43 +01:00
ad9c76e97f
Update to current libopencm3 usb api.
2013-01-10 22:01:21 -08:00
Gareth McMullin
Richard Eoin Meadows
Frantisek Burian
bon@elektron.ikp.physik.tu-darmstadt.de
Michael Tharp
Marc Singer
Allen Ibara
Gareth McMullin
Paul Fertser