1.2 KiB
1.2 KiB
Firmware BMP for STM32F401/stm32f411 MiniF4 aka BlackPillV2 boards
Allows the use of BlackPillV2 as a Black Magic Probe
https://github.com/WeActTC/MiniSTM32F4x1
Connections
-
JTAG/SWD
- PA1: TDI
- PA13: TMS/SWDIO
- PA14: TCK/SWCLK
- PB3: TDO/TRACESWO
- PB5: TRST
- PB4: nRST
-
USB USART
- PB6: USART1 TX (usbuart_xxx)
- PB7: USART1 RX (usbuart_xxx)
-
+3V3.
- PB8 - turn on IRLML5103 transistor
How to Build
cd blackmagic
make clean
make PROBE_HOST=blackpill
How to Flash with dfu
- After build:
-
apt install dfu-util
-
- Force the F4 into system bootloader mode by jumpering "BOOT0" to "3V3" and "PB2/BOOT1" to "GND" and reset (RESET button). System bootloader should appear.
-
dfu-util -a 0 --dfuse-address 0x08000000 -D blackmagic.bin
-
To exit from dfu mode press a "key" and "reset", release reset. BMP firmware should appear
10 pin male from pins
| PB3/TDO | PB7/RX | PB6/TX | X | PA1/TDI |
|---|---|---|---|---|
| PB4/nRST | +3V3/PB8 SW | PA13/SWDIO | PA14/SWCLK | GND |
SWD/JTAG frequency setting
https://github.com/blackmagic-debug/blackmagic/pull/783#issue-529197718
mon freq 900k helps at most