rev4 finalization stuff
This commit is contained in:
parent
f206327856
commit
1fee45eb99
|
|
@ -5,3 +5,8 @@ fp-lib-table
|
||||||
*.kicad_prl
|
*.kicad_prl
|
||||||
*-backups/*.zip
|
*-backups/*.zip
|
||||||
grb3/
|
grb3/
|
||||||
|
dragonzap/
|
||||||
|
*.bak
|
||||||
|
glitcher
|
||||||
|
glitcher.csv
|
||||||
|
glitcher.xml
|
||||||
|
|
|
||||||
25
README
25
README
|
|
@ -1,25 +0,0 @@
|
||||||
|
|
||||||
External module and footprint sources:
|
|
||||||
* https://github.com/ncarandini/KiCad-RP-Pico (Pico)
|
|
||||||
* https://github.com/lethalbit/aki-eda (Samtec SWD debug connector)
|
|
||||||
* https://git.lain.faith/sys64738/pcbs/src/branch/main/chip-bo (VMA404/WPM404,
|
|
||||||
4x2 jumper, Xenia silkscreen image, AP7168, DS1803)
|
|
||||||
|
|
||||||
See glitcher.bom.txt for a list of all components needed.
|
|
||||||
|
|
||||||
Docs are on the PCB silkscreen.
|
|
||||||
|
|
||||||
For U500, use MAX4619CSE+
|
|
||||||
For U401, use DS1803E-050+ (50k reqd for on-board buck-boost, can be different
|
|
||||||
resistance when not using it)
|
|
||||||
For U302, use [NOT AP7168-SPG-13] BD00IA5MEFJ-ME2 (-LBH2 is ok too)
|
|
||||||
|
|
||||||
For diodes, use eg. https://www.onsemi.com/pdf/datasheet/s110fp-d.pdf (buck-boost),
|
|
||||||
https://www.farnell.com/datasheets/2814310.pdf (GPIO Px),
|
|
||||||
https://www.farnell.com/datasheets/2721057.pdf (GPIO Sx)
|
|
||||||
|
|
||||||
Q1 can be https://www.farnell.com/datasheets/1455134.pdf or so, just make sure
|
|
||||||
it's the same pinout and package.
|
|
||||||
|
|
||||||
Most resistors and small (up to 10uF) capacitors are 0603. Big capacitors (47uF
|
|
||||||
and up) can be either electrolytic thru-hole or aluminium-polymer SMD.
|
|
||||||
|
|
@ -0,0 +1,132 @@
|
||||||
|
# Dragonzap
|
||||||
|
|
||||||
|
## Introduction
|
||||||
|
|
||||||
|
Dragonzap is a PCB for voltage glitching. It provides both a SPDT switch for
|
||||||
|
quickly switching between a high and a low voltage (controlled by a DAC), and a
|
||||||
|
MOSFET circuit for crowbar glitching. GPIOs to interact with the DUT can go
|
||||||
|
through a level shifter.
|
||||||
|
|
||||||
|
The PCB is about 9.2 cm by 5.4 cm in size.
|
||||||
|
|
||||||
|
## Images
|
||||||
|
|
||||||
|
### Front
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
### Back
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
### 3D view, with components
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## Notes
|
||||||
|
|
||||||
|
External module and footprint sources:
|
||||||
|
* https://github.com/ncarandini/KiCad-RP-Pico (Pico)
|
||||||
|
* https://github.com/lethalbit/aki-eda (Samtec FTSH SWD debug connector)
|
||||||
|
* https://git.lain.faith/sys64738/pcbs/src/branch/main/chip-bo (4x2 jumper,
|
||||||
|
Xenia silkscreen image)
|
||||||
|
|
||||||
|
## Usage
|
||||||
|
|
||||||
|
Firmware of the Pico controller is still TODO. Most of the documentation can
|
||||||
|
be found on the PCB silkscreen.
|
||||||
|
|
||||||
|
### Pico pinout
|
||||||
|
|
||||||
|
| Name | Pico pin | Usage |
|
||||||
|
|:---------- |:-------- |:----- |
|
||||||
|
| DUT GPIO | GP0..GP7 | Generic GPIO to the target DUT, goes through level shifter U200 and out to J200. GP0 and GP1 are also connected to JP100 for UART. |
|
||||||
|
| RV50x | ADC0, ADC1 | Potentiometers that can be used for manual parameter tweaking. |
|
||||||
|
| DACVCC/2 | ADC2 | Can be used to calculate the maximum voltage the DAC can reach, for calibration. |
|
||||||
|
| TRIG IN | GP10 | DUT trigger input. |
|
||||||
|
| GLITCH SIG | GP11 | DUT glitch (voltage supply) output, from U400. |
|
||||||
|
| CB1 (Q300) | GP12 | Crowbar gate 1 |
|
||||||
|
| CB2 (Q301) | GP13 | Crowbar gate 2 |
|
||||||
|
| DAC nLATCH | GP17 | `nLATCH` signal of the MCP4802 DAC (U401). |
|
||||||
|
| DAC CLK | GP18 | SPI clock signal of U401.
|
||||||
|
| DAC TX | GP19 | SPI controller-to-device data signal of U401. |
|
||||||
|
|
||||||
|
## BOM
|
||||||
|
|
||||||
|
### Base components
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| U100 | 1 | Raspberry Pico | Pico module | Raspberry Pico module/board | This one serves as the glitch controller. Very important. |
|
||||||
|
| C100 | 1 | 47 uF | THT Radial P2.00mm | Electrolytic capacitor | Extra decoupling capacitor for the Pico. |
|
||||||
|
| J200 | 1 | Pin header 01x08 | THT 2.54mm 01x08 | Generic pin header | Main GPIO to DUT connector, goes through level shifter U200. |
|
||||||
|
| J201, J202, J205 | 3 | Pin header 01x01 | THT 2.54mm 01x01 | Generic pin header | Main glitching to DUT connectors (pin headers). |
|
||||||
|
| J203, J204, J206 | 3 | Amphenol 132289 | SMA edge-mount connector | SMA connector | Main glitching to DUT connectors (SMA connectors). Has many other compatible connectors. |
|
||||||
|
|
||||||
|
### Optional connectors
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| J207 | 1 | Pin header 02x05 | THT 2.54mm 02x05 | Generic pin header | Power out (and extra external voltage in) connector. |
|
||||||
|
| D100 | 1 | 1N4001 | SOD-123 | Generic or Schottky diode. | Reset diode for external reset signal (SWD). |
|
||||||
|
| J100 | 1 | Pin header 01x04 | THT 2.54mm 01x04 | Generic pin header | UART connector (nonstandard, 2.54mm jumper) |
|
||||||
|
| J101 | 1 | Pin header 01x05 | THT 2.54mm 01x05 | Generic pin header | SWD connector (nonstandard, 2.54mm jumper) |
|
||||||
|
| J102 | 1 | FTSH-105-01-L-DV-007-K | THT 1.27mm 02x05 -OR- FTSH-105 SMD | Cortex debug connector | SWD connector (standard FTSH connector, 1.27mm pitch, either through-hole or surface-mount) |
|
||||||
|
|
||||||
|
### Manual control potentiometers
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| RV500, RV501 | 2 | Potentiometer | THT 2.54mm 1x3 | Potentiometer with colinear leads. | Used for optional manual control of parameters. |
|
||||||
|
|
||||||
|
### If you need the "emergency reset button"
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| Q1 | 1 | Generic NMOS | SOT-23 (GSD) | N-MOSFET transistor | Make sure it is completely on at a Vgs of 3.3V! Invertor NMOS for reset signal. |
|
||||||
|
| SW1 | 1 | Push button | THT 4-lead 6x6mm | Two-by-two push button switch, generic | Make sure the bends in the pushbutton leads are parallell with the lines on the silkscreen. |
|
||||||
|
| R1, R2 | 2 | 220k | 0805 | Resistor | Pullup/pulldown resistors. |
|
||||||
|
|
||||||
|
The emergency reset button will stop U100, and disable most other ICs (eg. U400, U200).
|
||||||
|
|
||||||
|
### If you need the DAC
|
||||||
|
|
||||||
|
The DAC can be used for the level shifter, crowbar glitcher and SPDT glitcher
|
||||||
|
(selected using JP200, JP300 and JP500).
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| U401 | 1 | MCP4802 | SOIC-8 3.9x4.9 (U401a) -OR- MSOP-8 3x3mm P0.65mm (U401b) | 2-channel 8-bit DAC, SPI interface. | DAC, optional. If not placed, you probably want to short JP500, and short the two leads as indicated on the silkscreen. SOIC and MSOP both work. |
|
||||||
|
| R500, R501 | 2 | 220k | 0805 | Generic resistor | Voltage divider for max voltage sensing of U401. Only needed if you place the DAC (U401). |
|
||||||
|
| C401 | 1 | 10 nF | 0805 | Unpolarized (MLCC) capacitor | Decoupling capacitor for U401. Optional. |
|
||||||
|
|
||||||
|
### If you need the level shifter
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| U200 | 1 | TXS0108EPW -OR- NXS0108PW | TSSOP-20 4.4x6.5mm P0.65mm | Bidirectional level-shifting voltage translator | The level shifter. Source from TI or Nexperia. |
|
||||||
|
| R200 | 1 | 47k | 0805 | Pulldown resistor | Used for the enable line of U200. |
|
||||||
|
| JP200 | 1 | Pin header 02x04 | THT 2.54mm 02x04 | Level shifter external voltage selector. | Place a generic pin header here, use a pin shunt to select the voltage. |
|
||||||
|
|
||||||
|
If not using the level shifter, short the leads of the footprint of U200 as
|
||||||
|
shown on the PCB silkscreen.
|
||||||
|
|
||||||
|
### If you need the crowbar glitching circuit
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| Q300 | 1 | IRF7807/Si4850BDY/Si3463BDY | SOIC-8 3.9x4.9mm | N-channel Power MOSFET, SO-8 | Slower but higher-duty (current-wise) crowbar MOSFET. Need not be placed if Q301 is present. |
|
||||||
|
| Q301 | 1 | IRLML2502/IRLML6204 | SOT-23 | N-channel MOSFET, SOT-23 | Faster but more fragile crowbar MOSFET. Need not be placed if Q300 is present. |
|
||||||
|
| R300 | 1 | 50 Ohm | 0805/1206/2010/2512 | Current limiting resistor | Current limit resistor through which power is optionally supplied to the target. Several footprints work. Use eg. ESR10EZPF49R9. |
|
||||||
|
| JP300 | 1 | Pin header 02x04 | THT 2.43mm 02x04 | Generic pin header | Crowbar power supply, place generic pin header and use a pin shunt. Can be left open if target is self-powered. |
|
||||||
|
|
||||||
|
Note, Q300 and Q301 are selected by separate GPIO lines on the Pico.
|
||||||
|
|
||||||
|
### If you need the SPDT switch glitching circuit
|
||||||
|
|
||||||
|
| Ref | Quantity | Product | Footprint | Description | Notes |
|
||||||
|
|:---- | --------:|:-------------- |:----------- |:----------- |:----- |
|
||||||
|
| U400 | 1 | MAX4619CSE+ | SOIC-8 3.9x4.9mm | Triple analog SPDT switch | Fast SPDT switch IC, used for glitching (selecting between high and low voltage levels). |
|
||||||
|
| R400, R401 | 2 | 220k | 0805 | Generic resistor | Pullup/pulldown resistors for the enable line of U400. |
|
||||||
|
| C400 | 1 | 10 nF | 0805 | Unpolarized (MLCC) capacitor | Decoupling capacitor for U400. Optional. |
|
||||||
|
|
||||||
|
|
@ -926,7 +926,7 @@
|
||||||
(property "Reference" "Q300" (id 0) (at 92.837 112.1215 0)
|
(property "Reference" "Q300" (id 0) (at 92.837 112.1215 0)
|
||||||
(effects (font (size 1.27 1.27)) (justify left))
|
(effects (font (size 1.27 1.27)) (justify left))
|
||||||
)
|
)
|
||||||
(property "Value" "IRF7404/Si4850BDY/Si3464BDY" (id 1) (at 92.837 114.8966 0)
|
(property "Value" "IRF7807/Si4850BDY/Si3464BDY" (id 1) (at 92.837 114.8966 0)
|
||||||
(effects (font (size 1.27 1.27)) (justify left))
|
(effects (font (size 1.27 1.27)) (justify left))
|
||||||
)
|
)
|
||||||
(property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (id 2) (at 92.71 114.935 0)
|
(property "Footprint" "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (id 2) (at 92.71 114.935 0)
|
||||||
|
|
|
||||||
Binary file not shown.
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,419 @@
|
||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,6.0.1*%
|
||||||
|
%TF.CreationDate,2022-02-28T04:04:16+01:00*%
|
||||||
|
%TF.ProjectId,glitcher,676c6974-6368-4657-922e-6b696361645f,4*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Soldermask,Bot*%
|
||||||
|
%TF.FilePolarity,Negative*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 6.0.1) date 2022-02-28 04:04:16*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
%AMFreePoly0*
|
||||||
|
4,1,22,0.500000,-0.750000,0.000000,-0.750000,0.000000,-0.745033,-0.079941,-0.743568,-0.215256,-0.701293,-0.333266,-0.622738,-0.424486,-0.514219,-0.481581,-0.384460,-0.499164,-0.250000,-0.500000,-0.250000,-0.500000,0.250000,-0.499164,0.250000,-0.499963,0.256109,-0.478152,0.396186,-0.417904,0.524511,-0.324060,0.630769,-0.204165,0.706417,-0.067858,0.745374,0.000000,0.744959,0.000000,0.750000,
|
||||||
|
0.500000,0.750000,0.500000,-0.750000,0.500000,-0.750000,$1*%
|
||||||
|
%AMFreePoly1*
|
||||||
|
4,1,20,0.000000,0.744959,0.073905,0.744508,0.209726,0.703889,0.328688,0.626782,0.421226,0.519385,0.479903,0.390333,0.500000,0.250000,0.500000,-0.250000,0.499851,-0.262216,0.476331,-0.402017,0.414519,-0.529596,0.319384,-0.634700,0.198574,-0.708877,0.061801,-0.746166,0.000000,-0.745033,0.000000,-0.750000,-0.500000,-0.750000,-0.500000,0.750000,0.000000,0.750000,0.000000,0.744959,
|
||||||
|
0.000000,0.744959,$1*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10R,5.080000X1.500000*%
|
||||||
|
%ADD11C,0.800000*%
|
||||||
|
%ADD12C,6.400000*%
|
||||||
|
%ADD13R,1.700000X1.700000*%
|
||||||
|
%ADD14O,1.700000X1.700000*%
|
||||||
|
%ADD15C,1.440000*%
|
||||||
|
%ADD16O,1.500000X1.500000*%
|
||||||
|
%ADD17O,1.800000X1.800000*%
|
||||||
|
%ADD18R,1.000000X1.000000*%
|
||||||
|
%ADD19O,1.000000X1.000000*%
|
||||||
|
%ADD20R,1.200000X1.200000*%
|
||||||
|
%ADD21C,1.200000*%
|
||||||
|
%ADD22C,2.000000*%
|
||||||
|
%ADD23R,0.900000X1.200000*%
|
||||||
|
%ADD24RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
|
||||||
|
%ADD25FreePoly0,0.000000*%
|
||||||
|
%ADD26FreePoly1,0.000000*%
|
||||||
|
%ADD27RoundRect,0.150000X0.587500X0.150000X-0.587500X0.150000X-0.587500X-0.150000X0.587500X-0.150000X0*%
|
||||||
|
%ADD28RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
|
||||||
|
%ADD29RoundRect,0.100000X-0.100000X0.637500X-0.100000X-0.637500X0.100000X-0.637500X0.100000X0.637500X0*%
|
||||||
|
%ADD30RoundRect,0.100000X-0.712500X-0.100000X0.712500X-0.100000X0.712500X0.100000X-0.712500X0.100000X0*%
|
||||||
|
%ADD31RoundRect,0.150000X0.150000X-0.587500X0.150000X0.587500X-0.150000X0.587500X-0.150000X-0.587500X0*%
|
||||||
|
%ADD32RoundRect,0.150000X0.725000X0.150000X-0.725000X0.150000X-0.725000X-0.150000X0.725000X-0.150000X0*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,J206*%
|
||||||
|
X159845000Y-83037000D03*
|
||||||
|
X159845000Y-91537000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,H3*%
|
||||||
|
X160896000Y-122682000D03*
|
||||||
|
X156798944Y-120984944D03*
|
||||||
|
X158496000Y-125082000D03*
|
||||||
|
X156798944Y-124379056D03*
|
||||||
|
X160193056Y-120984944D03*
|
||||||
|
X160193056Y-124379056D03*
|
||||||
|
X158496000Y-120282000D03*
|
||||||
|
D12*
|
||||||
|
X158496000Y-122682000D03*
|
||||||
|
D11*
|
||||||
|
X156096000Y-122682000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,JP300*%
|
||||||
|
X93091000Y-93472000D03*
|
||||||
|
D14*
|
||||||
|
X93091000Y-96012000D03*
|
||||||
|
X93091000Y-98552000D03*
|
||||||
|
X93091000Y-101092000D03*
|
||||||
|
X95631000Y-96012000D03*
|
||||||
|
X95631000Y-101092000D03*
|
||||||
|
X95631000Y-93472000D03*
|
||||||
|
X95631000Y-98552000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J207*%
|
||||||
|
X140721000Y-77602000D03*
|
||||||
|
D14*
|
||||||
|
X140721000Y-75062000D03*
|
||||||
|
X143261000Y-77602000D03*
|
||||||
|
X143261000Y-75062000D03*
|
||||||
|
X145801000Y-77602000D03*
|
||||||
|
X145801000Y-75062000D03*
|
||||||
|
X148341000Y-77602000D03*
|
||||||
|
X148341000Y-75062000D03*
|
||||||
|
X150881000Y-77602000D03*
|
||||||
|
X150881000Y-75062000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J202*%
|
||||||
|
X152776000Y-99441000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,J200*%
|
||||||
|
X151638000Y-122682000D03*
|
||||||
|
D14*
|
||||||
|
X149098000Y-122682000D03*
|
||||||
|
X146558000Y-122682000D03*
|
||||||
|
X144018000Y-122682000D03*
|
||||||
|
X141478000Y-122682000D03*
|
||||||
|
X138938000Y-122682000D03*
|
||||||
|
X136398000Y-122682000D03*
|
||||||
|
X133858000Y-122682000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,JP200*%
|
||||||
|
X93091000Y-110363000D03*
|
||||||
|
D14*
|
||||||
|
X93091000Y-112903000D03*
|
||||||
|
X93091000Y-115443000D03*
|
||||||
|
X93091000Y-117983000D03*
|
||||||
|
X95631000Y-115443000D03*
|
||||||
|
X95631000Y-112903000D03*
|
||||||
|
X95631000Y-110363000D03*
|
||||||
|
X95631000Y-117983000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,RV500*%
|
||||||
|
X80137000Y-95631000D03*
|
||||||
|
X80137000Y-98171000D03*
|
||||||
|
X80137000Y-100711000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J205*%
|
||||||
|
X153030000Y-87317000D03*
|
||||||
|
%TD*%
|
||||||
|
D16*
|
||||||
|
%TO.C,U100*%
|
||||||
|
X110986000Y-121173000D03*
|
||||||
|
D17*
|
||||||
|
X110686000Y-124203000D03*
|
||||||
|
X116136000Y-124203000D03*
|
||||||
|
D16*
|
||||||
|
X115836000Y-121173000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-124333000D03*
|
||||||
|
X122301000Y-121793000D03*
|
||||||
|
D13*
|
||||||
|
X122301000Y-119253000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-116713000D03*
|
||||||
|
X122301000Y-114173000D03*
|
||||||
|
X122301000Y-111633000D03*
|
||||||
|
X122301000Y-109093000D03*
|
||||||
|
D13*
|
||||||
|
X122301000Y-106553000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-104013000D03*
|
||||||
|
X122301000Y-101473000D03*
|
||||||
|
X122301000Y-98933000D03*
|
||||||
|
X122301000Y-96393000D03*
|
||||||
|
D13*
|
||||||
|
X122301000Y-93853000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-91313000D03*
|
||||||
|
X122301000Y-88773000D03*
|
||||||
|
X122301000Y-86233000D03*
|
||||||
|
X122301000Y-83693000D03*
|
||||||
|
D13*
|
||||||
|
X122301000Y-81153000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-78613000D03*
|
||||||
|
X122301000Y-76073000D03*
|
||||||
|
X104521000Y-76073000D03*
|
||||||
|
X104521000Y-78613000D03*
|
||||||
|
D13*
|
||||||
|
X104521000Y-81153000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-83693000D03*
|
||||||
|
X104521000Y-86233000D03*
|
||||||
|
X104521000Y-88773000D03*
|
||||||
|
X104521000Y-91313000D03*
|
||||||
|
D13*
|
||||||
|
X104521000Y-93853000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-96393000D03*
|
||||||
|
X104521000Y-98933000D03*
|
||||||
|
X104521000Y-101473000D03*
|
||||||
|
X104521000Y-104013000D03*
|
||||||
|
D13*
|
||||||
|
X104521000Y-106553000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-109093000D03*
|
||||||
|
X104521000Y-111633000D03*
|
||||||
|
X104521000Y-114173000D03*
|
||||||
|
X104521000Y-116713000D03*
|
||||||
|
D13*
|
||||||
|
X104521000Y-119253000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-121793000D03*
|
||||||
|
X104521000Y-124333000D03*
|
||||||
|
X115951000Y-76303000D03*
|
||||||
|
D13*
|
||||||
|
X113411000Y-76303000D03*
|
||||||
|
D14*
|
||||||
|
X110871000Y-76303000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,REF\u002A\u002A*%
|
||||||
|
X83694000Y-84326000D03*
|
||||||
|
D19*
|
||||||
|
X82424000Y-84326000D03*
|
||||||
|
X83694000Y-83056000D03*
|
||||||
|
X82424000Y-83056000D03*
|
||||||
|
X83694000Y-81786000D03*
|
||||||
|
X82424000Y-81786000D03*
|
||||||
|
X83694000Y-80516000D03*
|
||||||
|
X82424000Y-80516000D03*
|
||||||
|
X83694000Y-79246000D03*
|
||||||
|
X82424000Y-79246000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,RV501*%
|
||||||
|
X80137000Y-107457000D03*
|
||||||
|
X80137000Y-109997000D03*
|
||||||
|
X80137000Y-112537000D03*
|
||||||
|
%TD*%
|
||||||
|
D20*
|
||||||
|
%TO.C,C100*%
|
||||||
|
X95123000Y-124333000D03*
|
||||||
|
D21*
|
||||||
|
X93123000Y-124333000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,H2*%
|
||||||
|
X156798944Y-78405056D03*
|
||||||
|
X156096000Y-76708000D03*
|
||||||
|
X158496000Y-79108000D03*
|
||||||
|
X158496000Y-74308000D03*
|
||||||
|
X160193056Y-78405056D03*
|
||||||
|
X160896000Y-76708000D03*
|
||||||
|
X160193056Y-75010944D03*
|
||||||
|
D12*
|
||||||
|
X158496000Y-76708000D03*
|
||||||
|
D11*
|
||||||
|
X156798944Y-75010944D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J201*%
|
||||||
|
X154940000Y-112141000D03*
|
||||||
|
%TD*%
|
||||||
|
D22*
|
||||||
|
%TO.C,SW1*%
|
||||||
|
X84444400Y-125119200D03*
|
||||||
|
X84444400Y-118619200D03*
|
||||||
|
X79944400Y-118619200D03*
|
||||||
|
X79944400Y-125119200D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J100*%
|
||||||
|
X129032000Y-123307000D03*
|
||||||
|
D14*
|
||||||
|
X129032000Y-120767000D03*
|
||||||
|
X129032000Y-118227000D03*
|
||||||
|
X129032000Y-115687000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,J101*%
|
||||||
|
X74676000Y-83566000D03*
|
||||||
|
D14*
|
||||||
|
X74676000Y-86106000D03*
|
||||||
|
X74676000Y-88646000D03*
|
||||||
|
X74676000Y-91186000D03*
|
||||||
|
X74676000Y-93726000D03*
|
||||||
|
%TD*%
|
||||||
|
D10*
|
||||||
|
%TO.C,J204*%
|
||||||
|
X159888000Y-95445000D03*
|
||||||
|
X159888000Y-103945000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,J203*%
|
||||||
|
X159888000Y-107891000D03*
|
||||||
|
X159888000Y-116391000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,H1*%
|
||||||
|
X74803000Y-78981000D03*
|
||||||
|
X73105944Y-74883944D03*
|
||||||
|
D12*
|
||||||
|
X74803000Y-76581000D03*
|
||||||
|
D11*
|
||||||
|
X74803000Y-74181000D03*
|
||||||
|
X73105944Y-78278056D03*
|
||||||
|
X77203000Y-76581000D03*
|
||||||
|
X76500056Y-78278056D03*
|
||||||
|
X72403000Y-76581000D03*
|
||||||
|
X76500056Y-74883944D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,H4*%
|
||||||
|
X76500056Y-120984944D03*
|
||||||
|
D12*
|
||||||
|
X74803000Y-122682000D03*
|
||||||
|
D11*
|
||||||
|
X72403000Y-122682000D03*
|
||||||
|
X76500056Y-124379056D03*
|
||||||
|
X74803000Y-120282000D03*
|
||||||
|
X74803000Y-125082000D03*
|
||||||
|
X77203000Y-122682000D03*
|
||||||
|
X73105944Y-120984944D03*
|
||||||
|
X73105944Y-124379056D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,D100*%
|
||||||
|
X84202000Y-92202000D03*
|
||||||
|
X87502000Y-92202000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,R401*%
|
||||||
|
X136893500Y-98425000D03*
|
||||||
|
X138893500Y-98425000D03*
|
||||||
|
%TD*%
|
||||||
|
D25*
|
||||||
|
%TO.C,JP500*%
|
||||||
|
X91410000Y-90805000D03*
|
||||||
|
D26*
|
||||||
|
X92710000Y-90805000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,Q1*%
|
||||||
|
X118793500Y-96459000D03*
|
||||||
|
X118793500Y-98359000D03*
|
||||||
|
X116918500Y-97409000D03*
|
||||||
|
%TD*%
|
||||||
|
D28*
|
||||||
|
%TO.C,C400*%
|
||||||
|
X145919100Y-93319600D03*
|
||||||
|
X143844100Y-93319600D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,U200*%
|
||||||
|
X139442000Y-113088500D03*
|
||||||
|
X140092000Y-113088500D03*
|
||||||
|
X140742000Y-113088500D03*
|
||||||
|
X141392000Y-113088500D03*
|
||||||
|
X142042000Y-113088500D03*
|
||||||
|
X142692000Y-113088500D03*
|
||||||
|
X143342000Y-113088500D03*
|
||||||
|
X143992000Y-113088500D03*
|
||||||
|
X144642000Y-113088500D03*
|
||||||
|
X145292000Y-113088500D03*
|
||||||
|
X145292000Y-118813500D03*
|
||||||
|
X144642000Y-118813500D03*
|
||||||
|
X143992000Y-118813500D03*
|
||||||
|
X143342000Y-118813500D03*
|
||||||
|
X142692000Y-118813500D03*
|
||||||
|
X142042000Y-118813500D03*
|
||||||
|
X141392000Y-118813500D03*
|
||||||
|
X140742000Y-118813500D03*
|
||||||
|
X140092000Y-118813500D03*
|
||||||
|
X139442000Y-118813500D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,R2*%
|
||||||
|
X111776000Y-98806000D03*
|
||||||
|
X113776000Y-98806000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R400*%
|
||||||
|
X136893500Y-100623000D03*
|
||||||
|
X138893500Y-100623000D03*
|
||||||
|
%TD*%
|
||||||
|
D30*
|
||||||
|
%TO.C,U401b*%
|
||||||
|
X91613500Y-85001819D03*
|
||||||
|
X91613500Y-84351819D03*
|
||||||
|
X91613500Y-83701819D03*
|
||||||
|
X91613500Y-83051819D03*
|
||||||
|
X95838500Y-83051819D03*
|
||||||
|
X95838500Y-83701819D03*
|
||||||
|
X95838500Y-84351819D03*
|
||||||
|
X95838500Y-85001819D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,Q301*%
|
||||||
|
X145222000Y-87170500D03*
|
||||||
|
X143322000Y-87170500D03*
|
||||||
|
X144272000Y-85295500D03*
|
||||||
|
%TD*%
|
||||||
|
D32*
|
||||||
|
%TO.C,U400*%
|
||||||
|
X147863000Y-95631000D03*
|
||||||
|
X147863000Y-96901000D03*
|
||||||
|
X147863000Y-98171000D03*
|
||||||
|
X147863000Y-99441000D03*
|
||||||
|
X147863000Y-100711000D03*
|
||||||
|
X147863000Y-101981000D03*
|
||||||
|
X147863000Y-103251000D03*
|
||||||
|
X147863000Y-104521000D03*
|
||||||
|
X142713000Y-104521000D03*
|
||||||
|
X142713000Y-103251000D03*
|
||||||
|
X142713000Y-101981000D03*
|
||||||
|
X142713000Y-100711000D03*
|
||||||
|
X142713000Y-99441000D03*
|
||||||
|
X142713000Y-98171000D03*
|
||||||
|
X142713000Y-96901000D03*
|
||||||
|
X142713000Y-95631000D03*
|
||||||
|
%TD*%
|
||||||
|
D24*
|
||||||
|
%TO.C,R1*%
|
||||||
|
X111776000Y-95856000D03*
|
||||||
|
X113776000Y-95856000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
|
|
@ -0,0 +1,149 @@
|
||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,6.0.1*%
|
||||||
|
%TF.CreationDate,2022-02-28T04:04:16+01:00*%
|
||||||
|
%TF.ProjectId,glitcher,676c6974-6368-4657-922e-6b696361645f,4*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Paste,Bot*%
|
||||||
|
%TF.FilePolarity,Positive*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 6.0.1) date 2022-02-28 04:04:16*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10R,5.080000X1.500000*%
|
||||||
|
%ADD11R,0.900000X1.200000*%
|
||||||
|
%ADD12RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
|
||||||
|
%ADD13RoundRect,0.150000X0.587500X0.150000X-0.587500X0.150000X-0.587500X-0.150000X0.587500X-0.150000X0*%
|
||||||
|
%ADD14RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
|
||||||
|
%ADD15RoundRect,0.100000X-0.100000X0.637500X-0.100000X-0.637500X0.100000X-0.637500X0.100000X0.637500X0*%
|
||||||
|
%ADD16RoundRect,0.100000X-0.712500X-0.100000X0.712500X-0.100000X0.712500X0.100000X-0.712500X0.100000X0*%
|
||||||
|
%ADD17RoundRect,0.150000X0.150000X-0.587500X0.150000X0.587500X-0.150000X0.587500X-0.150000X-0.587500X0*%
|
||||||
|
%ADD18RoundRect,0.150000X0.725000X0.150000X-0.725000X0.150000X-0.725000X-0.150000X0.725000X-0.150000X0*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,J206*%
|
||||||
|
X159845000Y-83037000D03*
|
||||||
|
X159845000Y-91537000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,J204*%
|
||||||
|
X159888000Y-95445000D03*
|
||||||
|
X159888000Y-103945000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,J203*%
|
||||||
|
X159888000Y-107891000D03*
|
||||||
|
X159888000Y-116391000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,D100*%
|
||||||
|
X84202000Y-92202000D03*
|
||||||
|
X87502000Y-92202000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,R401*%
|
||||||
|
X136893500Y-98425000D03*
|
||||||
|
X138893500Y-98425000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,Q1*%
|
||||||
|
X118793500Y-96459000D03*
|
||||||
|
X118793500Y-98359000D03*
|
||||||
|
X116918500Y-97409000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,C400*%
|
||||||
|
X145919100Y-93319600D03*
|
||||||
|
X143844100Y-93319600D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,U200*%
|
||||||
|
X139442000Y-113088500D03*
|
||||||
|
X140092000Y-113088500D03*
|
||||||
|
X140742000Y-113088500D03*
|
||||||
|
X141392000Y-113088500D03*
|
||||||
|
X142042000Y-113088500D03*
|
||||||
|
X142692000Y-113088500D03*
|
||||||
|
X143342000Y-113088500D03*
|
||||||
|
X143992000Y-113088500D03*
|
||||||
|
X144642000Y-113088500D03*
|
||||||
|
X145292000Y-113088500D03*
|
||||||
|
X145292000Y-118813500D03*
|
||||||
|
X144642000Y-118813500D03*
|
||||||
|
X143992000Y-118813500D03*
|
||||||
|
X143342000Y-118813500D03*
|
||||||
|
X142692000Y-118813500D03*
|
||||||
|
X142042000Y-118813500D03*
|
||||||
|
X141392000Y-118813500D03*
|
||||||
|
X140742000Y-118813500D03*
|
||||||
|
X140092000Y-118813500D03*
|
||||||
|
X139442000Y-118813500D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,R2*%
|
||||||
|
X111776000Y-98806000D03*
|
||||||
|
X113776000Y-98806000D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,R400*%
|
||||||
|
X136893500Y-100623000D03*
|
||||||
|
X138893500Y-100623000D03*
|
||||||
|
%TD*%
|
||||||
|
D16*
|
||||||
|
%TO.C,U401b*%
|
||||||
|
X91613500Y-85001819D03*
|
||||||
|
X91613500Y-84351819D03*
|
||||||
|
X91613500Y-83701819D03*
|
||||||
|
X91613500Y-83051819D03*
|
||||||
|
X95838500Y-83051819D03*
|
||||||
|
X95838500Y-83701819D03*
|
||||||
|
X95838500Y-84351819D03*
|
||||||
|
X95838500Y-85001819D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,Q301*%
|
||||||
|
X145222000Y-87170500D03*
|
||||||
|
X143322000Y-87170500D03*
|
||||||
|
X144272000Y-85295500D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,U400*%
|
||||||
|
X147863000Y-95631000D03*
|
||||||
|
X147863000Y-96901000D03*
|
||||||
|
X147863000Y-98171000D03*
|
||||||
|
X147863000Y-99441000D03*
|
||||||
|
X147863000Y-100711000D03*
|
||||||
|
X147863000Y-101981000D03*
|
||||||
|
X147863000Y-103251000D03*
|
||||||
|
X147863000Y-104521000D03*
|
||||||
|
X142713000Y-104521000D03*
|
||||||
|
X142713000Y-103251000D03*
|
||||||
|
X142713000Y-101981000D03*
|
||||||
|
X142713000Y-100711000D03*
|
||||||
|
X142713000Y-99441000D03*
|
||||||
|
X142713000Y-98171000D03*
|
||||||
|
X142713000Y-96901000D03*
|
||||||
|
X142713000Y-95631000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,R1*%
|
||||||
|
X111776000Y-95856000D03*
|
||||||
|
X113776000Y-95856000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,46 @@
|
||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,6.0.1*%
|
||||||
|
%TF.CreationDate,2022-02-28T04:04:16+01:00*%
|
||||||
|
%TF.ProjectId,glitcher,676c6974-6368-4657-922e-6b696361645f,4*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Profile,NP*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 6.0.1) date 2022-02-28 04:04:16*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
%TA.AperFunction,Profile*%
|
||||||
|
%ADD10C,0.050000*%
|
||||||
|
%TD*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
X74803000Y-72644000D02*
|
||||||
|
G75*
|
||||||
|
G03*
|
||||||
|
X70739000Y-76708000I0J-4064000D01*
|
||||||
|
G01*
|
||||||
|
X162687000Y-122809000D02*
|
||||||
|
X162687000Y-76708000D01*
|
||||||
|
X158496000Y-72644000D02*
|
||||||
|
X74803000Y-72644000D01*
|
||||||
|
X162686999Y-76708000D02*
|
||||||
|
G75*
|
||||||
|
G03*
|
||||||
|
X158496000Y-72644000I-4099222J-34339D01*
|
||||||
|
G01*
|
||||||
|
X158496000Y-126920318D02*
|
||||||
|
G75*
|
||||||
|
G03*
|
||||||
|
X162687000Y-122809000I-221782J4417853D01*
|
||||||
|
G01*
|
||||||
|
X70739000Y-122856318D02*
|
||||||
|
G75*
|
||||||
|
G03*
|
||||||
|
X74803000Y-126920318I4064000J0D01*
|
||||||
|
G01*
|
||||||
|
X74803000Y-126920318D02*
|
||||||
|
X158496000Y-126920318D01*
|
||||||
|
X70739000Y-76708000D02*
|
||||||
|
X70739000Y-122856318D01*
|
||||||
|
M02*
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,485 @@
|
||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,6.0.1*%
|
||||||
|
%TF.CreationDate,2022-02-28T04:04:16+01:00*%
|
||||||
|
%TF.ProjectId,glitcher,676c6974-6368-4657-922e-6b696361645f,4*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Soldermask,Top*%
|
||||||
|
%TF.FilePolarity,Negative*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 6.0.1) date 2022-02-28 04:04:16*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10RoundRect,0.250000X0.450000X-0.350000X0.450000X0.350000X-0.450000X0.350000X-0.450000X-0.350000X0*%
|
||||||
|
%ADD11R,5.080000X1.500000*%
|
||||||
|
%ADD12C,0.800000*%
|
||||||
|
%ADD13C,6.400000*%
|
||||||
|
%ADD14R,1.700000X1.700000*%
|
||||||
|
%ADD15O,1.700000X1.700000*%
|
||||||
|
%ADD16RoundRect,0.249999X1.075001X-0.450001X1.075001X0.450001X-1.075001X0.450001X-1.075001X-0.450001X0*%
|
||||||
|
%ADD17C,1.440000*%
|
||||||
|
%ADD18RoundRect,0.250000X0.350000X0.450000X-0.350000X0.450000X-0.350000X-0.450000X0.350000X-0.450000X0*%
|
||||||
|
%ADD19O,1.500000X1.500000*%
|
||||||
|
%ADD20O,1.800000X1.800000*%
|
||||||
|
%ADD21R,3.500000X1.700000*%
|
||||||
|
%ADD22R,1.700000X3.500000*%
|
||||||
|
%ADD23R,1.000000X1.000000*%
|
||||||
|
%ADD24O,1.000000X1.000000*%
|
||||||
|
%ADD25R,2.790000X0.740000*%
|
||||||
|
%ADD26RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
|
||||||
|
%ADD27RoundRect,0.249999X1.425001X-0.450001X1.425001X0.450001X-1.425001X0.450001X-1.425001X-0.450001X0*%
|
||||||
|
%ADD28RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
|
||||||
|
%ADD29R,1.200000X1.200000*%
|
||||||
|
%ADD30C,1.200000*%
|
||||||
|
%ADD31RoundRect,0.250000X0.625000X-0.400000X0.625000X0.400000X-0.625000X0.400000X-0.625000X-0.400000X0*%
|
||||||
|
%ADD32C,2.000000*%
|
||||||
|
%ADD33RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,R300d1*%
|
||||||
|
X135128000Y-88179000D03*
|
||||||
|
X135128000Y-86179000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J206*%
|
||||||
|
X159845000Y-87287000D03*
|
||||||
|
X159845000Y-91537000D03*
|
||||||
|
X159845000Y-83037000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,H3*%
|
||||||
|
X160896000Y-122682000D03*
|
||||||
|
X156798944Y-120984944D03*
|
||||||
|
X158496000Y-125082000D03*
|
||||||
|
X156798944Y-124379056D03*
|
||||||
|
X160193056Y-120984944D03*
|
||||||
|
X160193056Y-124379056D03*
|
||||||
|
X158496000Y-120282000D03*
|
||||||
|
D13*
|
||||||
|
X158496000Y-122682000D03*
|
||||||
|
D12*
|
||||||
|
X156096000Y-122682000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,JP300*%
|
||||||
|
X93091000Y-93472000D03*
|
||||||
|
D15*
|
||||||
|
X93091000Y-96012000D03*
|
||||||
|
X93091000Y-98552000D03*
|
||||||
|
X93091000Y-101092000D03*
|
||||||
|
X95631000Y-96012000D03*
|
||||||
|
X95631000Y-101092000D03*
|
||||||
|
X95631000Y-93472000D03*
|
||||||
|
X95631000Y-98552000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J207*%
|
||||||
|
X140721000Y-77602000D03*
|
||||||
|
D15*
|
||||||
|
X140721000Y-75062000D03*
|
||||||
|
X143261000Y-77602000D03*
|
||||||
|
X143261000Y-75062000D03*
|
||||||
|
X145801000Y-77602000D03*
|
||||||
|
X145801000Y-75062000D03*
|
||||||
|
X148341000Y-77602000D03*
|
||||||
|
X148341000Y-75062000D03*
|
||||||
|
X150881000Y-77602000D03*
|
||||||
|
X150881000Y-75062000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J202*%
|
||||||
|
X152776000Y-99441000D03*
|
||||||
|
%TD*%
|
||||||
|
D16*
|
||||||
|
%TO.C,R300b1*%
|
||||||
|
X135128000Y-89579000D03*
|
||||||
|
X135128000Y-84779000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J200*%
|
||||||
|
X151638000Y-122682000D03*
|
||||||
|
D15*
|
||||||
|
X149098000Y-122682000D03*
|
||||||
|
X146558000Y-122682000D03*
|
||||||
|
X144018000Y-122682000D03*
|
||||||
|
X141478000Y-122682000D03*
|
||||||
|
X138938000Y-122682000D03*
|
||||||
|
X136398000Y-122682000D03*
|
||||||
|
X133858000Y-122682000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,JP200*%
|
||||||
|
X93091000Y-110363000D03*
|
||||||
|
D15*
|
||||||
|
X93091000Y-112903000D03*
|
||||||
|
X93091000Y-115443000D03*
|
||||||
|
X93091000Y-117983000D03*
|
||||||
|
X95631000Y-115443000D03*
|
||||||
|
X95631000Y-112903000D03*
|
||||||
|
X95631000Y-110363000D03*
|
||||||
|
X95631000Y-117983000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,RV500*%
|
||||||
|
X80137000Y-95631000D03*
|
||||||
|
X80137000Y-98171000D03*
|
||||||
|
X80137000Y-100711000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J205*%
|
||||||
|
X153030000Y-87317000D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,R200*%
|
||||||
|
X153035000Y-116078000D03*
|
||||||
|
X151035000Y-116078000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,U100*%
|
||||||
|
X110986000Y-121173000D03*
|
||||||
|
D20*
|
||||||
|
X110686000Y-124203000D03*
|
||||||
|
X116136000Y-124203000D03*
|
||||||
|
D19*
|
||||||
|
X115836000Y-121173000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-124333000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-124333000D03*
|
||||||
|
X123201000Y-121793000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-121793000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-119253000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-119253000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-116713000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-116713000D03*
|
||||||
|
X123201000Y-114173000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-114173000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-111633000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-111633000D03*
|
||||||
|
X122301000Y-109093000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-109093000D03*
|
||||||
|
X123201000Y-106553000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-106553000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-104013000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-104013000D03*
|
||||||
|
X123201000Y-101473000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-101473000D03*
|
||||||
|
X122301000Y-98933000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-98933000D03*
|
||||||
|
X123201000Y-96393000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-96393000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-93853000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-93853000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-91313000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-91313000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-88773000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-88773000D03*
|
||||||
|
X123201000Y-86233000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-86233000D03*
|
||||||
|
X122301000Y-83693000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-83693000D03*
|
||||||
|
X123201000Y-81153000D03*
|
||||||
|
D14*
|
||||||
|
X122301000Y-81153000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-78613000D03*
|
||||||
|
D15*
|
||||||
|
X122301000Y-78613000D03*
|
||||||
|
X122301000Y-76073000D03*
|
||||||
|
D21*
|
||||||
|
X123201000Y-76073000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-76073000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-76073000D03*
|
||||||
|
X103621000Y-78613000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-78613000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-81153000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-81153000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-83693000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-83693000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-86233000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-86233000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-88773000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-88773000D03*
|
||||||
|
X103621000Y-91313000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-91313000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-93853000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-93853000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-96393000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-96393000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-98933000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-98933000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-101473000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-101473000D03*
|
||||||
|
X103621000Y-104013000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-104013000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-106553000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-106553000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-109093000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-109093000D03*
|
||||||
|
X103621000Y-111633000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-111633000D03*
|
||||||
|
X104521000Y-114173000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-114173000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-116713000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-116713000D03*
|
||||||
|
D14*
|
||||||
|
X104521000Y-119253000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-119253000D03*
|
||||||
|
X103621000Y-121793000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-121793000D03*
|
||||||
|
D21*
|
||||||
|
X103621000Y-124333000D03*
|
||||||
|
D15*
|
||||||
|
X104521000Y-124333000D03*
|
||||||
|
X115951000Y-76303000D03*
|
||||||
|
D22*
|
||||||
|
X115951000Y-75403000D03*
|
||||||
|
X113411000Y-75403000D03*
|
||||||
|
D14*
|
||||||
|
X113411000Y-76303000D03*
|
||||||
|
D15*
|
||||||
|
X110871000Y-76303000D03*
|
||||||
|
D22*
|
||||||
|
X110871000Y-75403000D03*
|
||||||
|
%TD*%
|
||||||
|
D23*
|
||||||
|
%TO.C,REF\u002A\u002A*%
|
||||||
|
X83694000Y-84326000D03*
|
||||||
|
D24*
|
||||||
|
X82424000Y-84326000D03*
|
||||||
|
X83694000Y-83056000D03*
|
||||||
|
X82424000Y-83056000D03*
|
||||||
|
X83694000Y-81786000D03*
|
||||||
|
X82424000Y-81786000D03*
|
||||||
|
X83694000Y-80516000D03*
|
||||||
|
X82424000Y-80516000D03*
|
||||||
|
X83694000Y-79246000D03*
|
||||||
|
X82424000Y-79246000D03*
|
||||||
|
%TD*%
|
||||||
|
D25*
|
||||||
|
%TO.C,J102*%
|
||||||
|
X85094000Y-84326000D03*
|
||||||
|
X81024000Y-84326000D03*
|
||||||
|
X85094000Y-83056000D03*
|
||||||
|
X81024000Y-83056000D03*
|
||||||
|
X85094000Y-81786000D03*
|
||||||
|
X81024000Y-81786000D03*
|
||||||
|
X85094000Y-80516000D03*
|
||||||
|
X81024000Y-80516000D03*
|
||||||
|
X85094000Y-79246000D03*
|
||||||
|
X81024000Y-79246000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,R500*%
|
||||||
|
X90424000Y-106553000D03*
|
||||||
|
X92424000Y-106553000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,RV501*%
|
||||||
|
X80137000Y-107457000D03*
|
||||||
|
X80137000Y-109997000D03*
|
||||||
|
X80137000Y-112537000D03*
|
||||||
|
%TD*%
|
||||||
|
D27*
|
||||||
|
%TO.C,R300*%
|
||||||
|
X135150000Y-90229000D03*
|
||||||
|
X135150000Y-84129000D03*
|
||||||
|
%TD*%
|
||||||
|
D28*
|
||||||
|
%TO.C,C401*%
|
||||||
|
X95017500Y-88598819D03*
|
||||||
|
X92942500Y-88598819D03*
|
||||||
|
%TD*%
|
||||||
|
D29*
|
||||||
|
%TO.C,C100*%
|
||||||
|
X95123000Y-124333000D03*
|
||||||
|
D30*
|
||||||
|
X93123000Y-124333000D03*
|
||||||
|
%TD*%
|
||||||
|
D31*
|
||||||
|
%TO.C,R300c1*%
|
||||||
|
X135128000Y-88729000D03*
|
||||||
|
X135128000Y-85629000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,H2*%
|
||||||
|
X156798944Y-78405056D03*
|
||||||
|
X156096000Y-76708000D03*
|
||||||
|
X158496000Y-79108000D03*
|
||||||
|
X158496000Y-74308000D03*
|
||||||
|
X160193056Y-78405056D03*
|
||||||
|
X160896000Y-76708000D03*
|
||||||
|
X160193056Y-75010944D03*
|
||||||
|
D13*
|
||||||
|
X158496000Y-76708000D03*
|
||||||
|
D12*
|
||||||
|
X156798944Y-75010944D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J201*%
|
||||||
|
X154940000Y-112141000D03*
|
||||||
|
%TD*%
|
||||||
|
D32*
|
||||||
|
%TO.C,SW1*%
|
||||||
|
X84444400Y-125119200D03*
|
||||||
|
X84444400Y-118619200D03*
|
||||||
|
X79944400Y-118619200D03*
|
||||||
|
X79944400Y-125119200D03*
|
||||||
|
%TD*%
|
||||||
|
D33*
|
||||||
|
%TO.C,U401a*%
|
||||||
|
X91505000Y-82375819D03*
|
||||||
|
X91505000Y-83645819D03*
|
||||||
|
X91505000Y-84915819D03*
|
||||||
|
X91505000Y-86185819D03*
|
||||||
|
X96455000Y-86185819D03*
|
||||||
|
X96455000Y-84915819D03*
|
||||||
|
X96455000Y-83645819D03*
|
||||||
|
X96455000Y-82375819D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J100*%
|
||||||
|
X129032000Y-123307000D03*
|
||||||
|
D15*
|
||||||
|
X129032000Y-120767000D03*
|
||||||
|
X129032000Y-118227000D03*
|
||||||
|
X129032000Y-115687000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J101*%
|
||||||
|
X74676000Y-83566000D03*
|
||||||
|
D15*
|
||||||
|
X74676000Y-86106000D03*
|
||||||
|
X74676000Y-88646000D03*
|
||||||
|
X74676000Y-91186000D03*
|
||||||
|
X74676000Y-93726000D03*
|
||||||
|
%TD*%
|
||||||
|
D26*
|
||||||
|
%TO.C,R501*%
|
||||||
|
X95250000Y-106553000D03*
|
||||||
|
X97250000Y-106553000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J204*%
|
||||||
|
X159888000Y-99695000D03*
|
||||||
|
X159888000Y-103945000D03*
|
||||||
|
X159888000Y-95445000D03*
|
||||||
|
%TD*%
|
||||||
|
D33*
|
||||||
|
%TO.C,Q300*%
|
||||||
|
X142051000Y-84582000D03*
|
||||||
|
X142051000Y-85852000D03*
|
||||||
|
X142051000Y-87122000D03*
|
||||||
|
X142051000Y-88392000D03*
|
||||||
|
X147001000Y-88392000D03*
|
||||||
|
X147001000Y-87122000D03*
|
||||||
|
X147001000Y-85852000D03*
|
||||||
|
X147001000Y-84582000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J203*%
|
||||||
|
X159888000Y-112141000D03*
|
||||||
|
X159888000Y-116391000D03*
|
||||||
|
X159888000Y-107891000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,H1*%
|
||||||
|
X74803000Y-78981000D03*
|
||||||
|
X73105944Y-74883944D03*
|
||||||
|
D13*
|
||||||
|
X74803000Y-76581000D03*
|
||||||
|
D12*
|
||||||
|
X74803000Y-74181000D03*
|
||||||
|
X73105944Y-78278056D03*
|
||||||
|
X77203000Y-76581000D03*
|
||||||
|
X76500056Y-78278056D03*
|
||||||
|
X72403000Y-76581000D03*
|
||||||
|
X76500056Y-74883944D03*
|
||||||
|
%TD*%
|
||||||
|
%TO.C,H4*%
|
||||||
|
X76500056Y-120984944D03*
|
||||||
|
D13*
|
||||||
|
X74803000Y-122682000D03*
|
||||||
|
D12*
|
||||||
|
X72403000Y-122682000D03*
|
||||||
|
X76500056Y-124379056D03*
|
||||||
|
X74803000Y-120282000D03*
|
||||||
|
X74803000Y-125082000D03*
|
||||||
|
X77203000Y-122682000D03*
|
||||||
|
X73105944Y-120984944D03*
|
||||||
|
X73105944Y-124379056D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
|
|
@ -0,0 +1,136 @@
|
||||||
|
%TF.GenerationSoftware,KiCad,Pcbnew,6.0.1*%
|
||||||
|
%TF.CreationDate,2022-02-28T04:04:16+01:00*%
|
||||||
|
%TF.ProjectId,glitcher,676c6974-6368-4657-922e-6b696361645f,4*%
|
||||||
|
%TF.SameCoordinates,Original*%
|
||||||
|
%TF.FileFunction,Paste,Top*%
|
||||||
|
%TF.FilePolarity,Positive*%
|
||||||
|
%FSLAX46Y46*%
|
||||||
|
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
|
||||||
|
G04 Created by KiCad (PCBNEW 6.0.1) date 2022-02-28 04:04:16*
|
||||||
|
%MOMM*%
|
||||||
|
%LPD*%
|
||||||
|
G01*
|
||||||
|
G04 APERTURE LIST*
|
||||||
|
G04 Aperture macros list*
|
||||||
|
%AMRoundRect*
|
||||||
|
0 Rectangle with rounded corners*
|
||||||
|
0 $1 Rounding radius*
|
||||||
|
0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners*
|
||||||
|
0 Add a 4 corners polygon primitive as box body*
|
||||||
|
4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0*
|
||||||
|
0 Add four circle primitives for the rounded corners*
|
||||||
|
1,1,$1+$1,$2,$3*
|
||||||
|
1,1,$1+$1,$4,$5*
|
||||||
|
1,1,$1+$1,$6,$7*
|
||||||
|
1,1,$1+$1,$8,$9*
|
||||||
|
0 Add four rect primitives between the rounded corners*
|
||||||
|
20,1,$1+$1,$2,$3,$4,$5,0*
|
||||||
|
20,1,$1+$1,$4,$5,$6,$7,0*
|
||||||
|
20,1,$1+$1,$6,$7,$8,$9,0*
|
||||||
|
20,1,$1+$1,$8,$9,$2,$3,0*%
|
||||||
|
G04 Aperture macros list end*
|
||||||
|
%ADD10RoundRect,0.250000X0.450000X-0.350000X0.450000X0.350000X-0.450000X0.350000X-0.450000X-0.350000X0*%
|
||||||
|
%ADD11R,5.080000X1.500000*%
|
||||||
|
%ADD12RoundRect,0.249999X1.075001X-0.450001X1.075001X0.450001X-1.075001X0.450001X-1.075001X-0.450001X0*%
|
||||||
|
%ADD13RoundRect,0.250000X0.350000X0.450000X-0.350000X0.450000X-0.350000X-0.450000X0.350000X-0.450000X0*%
|
||||||
|
%ADD14R,2.790000X0.740000*%
|
||||||
|
%ADD15RoundRect,0.250000X-0.350000X-0.450000X0.350000X-0.450000X0.350000X0.450000X-0.350000X0.450000X0*%
|
||||||
|
%ADD16RoundRect,0.249999X1.425001X-0.450001X1.425001X0.450001X-1.425001X0.450001X-1.425001X-0.450001X0*%
|
||||||
|
%ADD17RoundRect,0.250000X0.337500X0.475000X-0.337500X0.475000X-0.337500X-0.475000X0.337500X-0.475000X0*%
|
||||||
|
%ADD18RoundRect,0.250000X0.625000X-0.400000X0.625000X0.400000X-0.625000X0.400000X-0.625000X-0.400000X0*%
|
||||||
|
%ADD19RoundRect,0.150000X-0.825000X-0.150000X0.825000X-0.150000X0.825000X0.150000X-0.825000X0.150000X0*%
|
||||||
|
G04 APERTURE END LIST*
|
||||||
|
D10*
|
||||||
|
%TO.C,R300d1*%
|
||||||
|
X135128000Y-88179000D03*
|
||||||
|
X135128000Y-86179000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J206*%
|
||||||
|
X159845000Y-87287000D03*
|
||||||
|
X159845000Y-91537000D03*
|
||||||
|
X159845000Y-83037000D03*
|
||||||
|
%TD*%
|
||||||
|
D12*
|
||||||
|
%TO.C,R300b1*%
|
||||||
|
X135128000Y-89579000D03*
|
||||||
|
X135128000Y-84779000D03*
|
||||||
|
%TD*%
|
||||||
|
D13*
|
||||||
|
%TO.C,R200*%
|
||||||
|
X153035000Y-116078000D03*
|
||||||
|
X151035000Y-116078000D03*
|
||||||
|
%TD*%
|
||||||
|
D14*
|
||||||
|
%TO.C,J102*%
|
||||||
|
X85094000Y-84326000D03*
|
||||||
|
X81024000Y-84326000D03*
|
||||||
|
X85094000Y-83056000D03*
|
||||||
|
X81024000Y-83056000D03*
|
||||||
|
X85094000Y-81786000D03*
|
||||||
|
X81024000Y-81786000D03*
|
||||||
|
X85094000Y-80516000D03*
|
||||||
|
X81024000Y-80516000D03*
|
||||||
|
X85094000Y-79246000D03*
|
||||||
|
X81024000Y-79246000D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,R500*%
|
||||||
|
X90424000Y-106553000D03*
|
||||||
|
X92424000Y-106553000D03*
|
||||||
|
%TD*%
|
||||||
|
D16*
|
||||||
|
%TO.C,R300*%
|
||||||
|
X135150000Y-90229000D03*
|
||||||
|
X135150000Y-84129000D03*
|
||||||
|
%TD*%
|
||||||
|
D17*
|
||||||
|
%TO.C,C401*%
|
||||||
|
X95017500Y-88598819D03*
|
||||||
|
X92942500Y-88598819D03*
|
||||||
|
%TD*%
|
||||||
|
D18*
|
||||||
|
%TO.C,R300c1*%
|
||||||
|
X135128000Y-88729000D03*
|
||||||
|
X135128000Y-85629000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,U401a*%
|
||||||
|
X91505000Y-82375819D03*
|
||||||
|
X91505000Y-83645819D03*
|
||||||
|
X91505000Y-84915819D03*
|
||||||
|
X91505000Y-86185819D03*
|
||||||
|
X96455000Y-86185819D03*
|
||||||
|
X96455000Y-84915819D03*
|
||||||
|
X96455000Y-83645819D03*
|
||||||
|
X96455000Y-82375819D03*
|
||||||
|
%TD*%
|
||||||
|
D15*
|
||||||
|
%TO.C,R501*%
|
||||||
|
X95250000Y-106553000D03*
|
||||||
|
X97250000Y-106553000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J204*%
|
||||||
|
X159888000Y-99695000D03*
|
||||||
|
X159888000Y-103945000D03*
|
||||||
|
X159888000Y-95445000D03*
|
||||||
|
%TD*%
|
||||||
|
D19*
|
||||||
|
%TO.C,Q300*%
|
||||||
|
X142051000Y-84582000D03*
|
||||||
|
X142051000Y-85852000D03*
|
||||||
|
X142051000Y-87122000D03*
|
||||||
|
X142051000Y-88392000D03*
|
||||||
|
X147001000Y-88392000D03*
|
||||||
|
X147001000Y-87122000D03*
|
||||||
|
X147001000Y-85852000D03*
|
||||||
|
X147001000Y-84582000D03*
|
||||||
|
%TD*%
|
||||||
|
D11*
|
||||||
|
%TO.C,J203*%
|
||||||
|
X159888000Y-112141000D03*
|
||||||
|
X159888000Y-116391000D03*
|
||||||
|
X159888000Y-107891000D03*
|
||||||
|
%TD*%
|
||||||
|
M02*
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,23 @@
|
||||||
|
M48
|
||||||
|
; DRILL file {KiCad 6.0.1} date ma 28 feb 2022 04:04:21
|
||||||
|
; FORMAT={-:-/ absolute / inch / decimal}
|
||||||
|
; #@! TF.CreationDate,2022-02-28T04:04:21+01:00
|
||||||
|
; #@! TF.GenerationSoftware,Kicad,Pcbnew,6.0.1
|
||||||
|
; #@! TF.FileFunction,NonPlated,1,2,NPTH
|
||||||
|
FMAT,2
|
||||||
|
INCH
|
||||||
|
; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
|
||||||
|
T1C0.0591
|
||||||
|
; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
|
||||||
|
T2C0.0709
|
||||||
|
%
|
||||||
|
G90
|
||||||
|
G05
|
||||||
|
T1
|
||||||
|
X4.3695Y-4.7706
|
||||||
|
X4.5605Y-4.7706
|
||||||
|
T2
|
||||||
|
X4.3577Y-4.8899
|
||||||
|
X4.5723Y-4.8899
|
||||||
|
T0
|
||||||
|
M30
|
||||||
|
|
@ -0,0 +1,217 @@
|
||||||
|
M48
|
||||||
|
; DRILL file {KiCad 6.0.1} date ma 28 feb 2022 04:04:21
|
||||||
|
; FORMAT={-:-/ absolute / inch / decimal}
|
||||||
|
; #@! TF.CreationDate,2022-02-28T04:04:21+01:00
|
||||||
|
; #@! TF.GenerationSoftware,Kicad,Pcbnew,6.0.1
|
||||||
|
; #@! TF.FileFunction,Plated,1,2,PTH
|
||||||
|
FMAT,2
|
||||||
|
INCH
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ViaDrill
|
||||||
|
T1C0.0157
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T2C0.0197
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T3C0.0236
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T4C0.0256
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T5C0.0315
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T6C0.0394
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T7C0.0402
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T8C0.0433
|
||||||
|
; #@! TA.AperFunction,Plated,PTH,ComponentDrill
|
||||||
|
T9C0.1260
|
||||||
|
%
|
||||||
|
G90
|
||||||
|
G05
|
||||||
|
T1
|
||||||
|
X3.2662Y-2.9488
|
||||||
|
X3.445Y-3.485
|
||||||
|
X3.505Y-2.895
|
||||||
|
X3.505Y-4.215
|
||||||
|
X3.5308Y-3.3173
|
||||||
|
X3.6Y-3.4481
|
||||||
|
X3.67Y-3.41
|
||||||
|
X3.685Y-3.26
|
||||||
|
X3.712Y-3.39
|
||||||
|
X3.715Y-3.145
|
||||||
|
X3.75Y-3.595
|
||||||
|
X3.87Y-3.2831
|
||||||
|
X3.91Y-3.238
|
||||||
|
X4.23Y-3.405
|
||||||
|
X4.41Y-3.515
|
||||||
|
X5.17Y-3.99
|
||||||
|
X5.33Y-3.935
|
||||||
|
X5.39Y-4.57
|
||||||
|
X5.47Y-3.405
|
||||||
|
X5.555Y-4.035
|
||||||
|
X5.672Y-3.84
|
||||||
|
X5.674Y-3.9
|
||||||
|
X5.71Y-3.33
|
||||||
|
X5.72Y-4.585
|
||||||
|
X5.735Y-3.87
|
||||||
|
X5.74Y-3.96
|
||||||
|
X6.135Y-3.27
|
||||||
|
X6.135Y-4.58
|
||||||
|
X6.295Y-3.68
|
||||||
|
X6.295Y-4.17
|
||||||
|
T2
|
||||||
|
X2.8505Y-3.015
|
||||||
|
X2.8505Y-4.83
|
||||||
|
X2.8782Y-2.9482
|
||||||
|
X2.8782Y-3.0818
|
||||||
|
X2.8782Y-4.7632
|
||||||
|
X2.8782Y-4.8968
|
||||||
|
X2.945Y-2.9205
|
||||||
|
X2.945Y-3.1095
|
||||||
|
X2.945Y-4.7355
|
||||||
|
X2.945Y-4.9245
|
||||||
|
X3.0118Y-2.9482
|
||||||
|
X3.0118Y-3.0818
|
||||||
|
X3.0118Y-4.7632
|
||||||
|
X3.0118Y-4.8968
|
||||||
|
X3.0395Y-3.015
|
||||||
|
X3.0395Y-4.83
|
||||||
|
X6.1455Y-3.02
|
||||||
|
X6.1455Y-4.83
|
||||||
|
X6.1732Y-2.9532
|
||||||
|
X6.1732Y-3.0868
|
||||||
|
X6.1732Y-4.7632
|
||||||
|
X6.1732Y-4.8968
|
||||||
|
X6.24Y-2.9255
|
||||||
|
X6.24Y-3.1145
|
||||||
|
X6.24Y-4.7355
|
||||||
|
X6.24Y-4.9245
|
||||||
|
X6.3068Y-2.9532
|
||||||
|
X6.3068Y-3.0868
|
||||||
|
X6.3068Y-4.7632
|
||||||
|
X6.3068Y-4.8968
|
||||||
|
X6.3345Y-3.02
|
||||||
|
X6.3345Y-4.83
|
||||||
|
T3
|
||||||
|
X3.6663Y-4.895
|
||||||
|
X3.745Y-4.895
|
||||||
|
T4
|
||||||
|
X3.245Y-3.1199
|
||||||
|
X3.245Y-3.1699
|
||||||
|
X3.245Y-3.2199
|
||||||
|
X3.245Y-3.2699
|
||||||
|
X3.245Y-3.3199
|
||||||
|
X3.295Y-3.1199
|
||||||
|
X3.295Y-3.1699
|
||||||
|
X3.295Y-3.2199
|
||||||
|
X3.295Y-3.2699
|
||||||
|
X3.295Y-3.3199
|
||||||
|
T5
|
||||||
|
X3.155Y-3.765
|
||||||
|
X3.155Y-3.865
|
||||||
|
X3.155Y-3.965
|
||||||
|
X3.155Y-4.2306
|
||||||
|
X3.155Y-4.3306
|
||||||
|
X3.155Y-4.4306
|
||||||
|
T6
|
||||||
|
X2.94Y-3.29
|
||||||
|
X2.94Y-3.39
|
||||||
|
X2.94Y-3.49
|
||||||
|
X2.94Y-3.59
|
||||||
|
X2.94Y-3.69
|
||||||
|
X3.665Y-3.68
|
||||||
|
X3.665Y-3.78
|
||||||
|
X3.665Y-3.88
|
||||||
|
X3.665Y-3.98
|
||||||
|
X3.665Y-4.345
|
||||||
|
X3.665Y-4.445
|
||||||
|
X3.665Y-4.545
|
||||||
|
X3.665Y-4.645
|
||||||
|
X3.765Y-3.68
|
||||||
|
X3.765Y-3.78
|
||||||
|
X3.765Y-3.88
|
||||||
|
X3.765Y-3.98
|
||||||
|
X3.765Y-4.345
|
||||||
|
X3.765Y-4.445
|
||||||
|
X3.765Y-4.545
|
||||||
|
X3.765Y-4.645
|
||||||
|
X5.08Y-4.5546
|
||||||
|
X5.08Y-4.6546
|
||||||
|
X5.08Y-4.7546
|
||||||
|
X5.08Y-4.8546
|
||||||
|
X5.27Y-4.83
|
||||||
|
X5.37Y-4.83
|
||||||
|
X5.47Y-4.83
|
||||||
|
X5.5402Y-2.9552
|
||||||
|
X5.5402Y-3.0552
|
||||||
|
X5.57Y-4.83
|
||||||
|
X5.6402Y-2.9552
|
||||||
|
X5.6402Y-3.0552
|
||||||
|
X5.67Y-4.83
|
||||||
|
X5.7402Y-2.9552
|
||||||
|
X5.7402Y-3.0552
|
||||||
|
X5.77Y-4.83
|
||||||
|
X5.8402Y-2.9552
|
||||||
|
X5.8402Y-3.0552
|
||||||
|
X5.87Y-4.83
|
||||||
|
X5.9402Y-2.9552
|
||||||
|
X5.9402Y-3.0552
|
||||||
|
X5.97Y-4.83
|
||||||
|
X6.0148Y-3.915
|
||||||
|
X6.0248Y-3.4377
|
||||||
|
X6.1Y-4.415
|
||||||
|
T7
|
||||||
|
X4.115Y-2.995
|
||||||
|
X4.115Y-3.095
|
||||||
|
X4.115Y-3.195
|
||||||
|
X4.115Y-3.295
|
||||||
|
X4.115Y-3.395
|
||||||
|
X4.115Y-3.495
|
||||||
|
X4.115Y-3.595
|
||||||
|
X4.115Y-3.695
|
||||||
|
X4.115Y-3.795
|
||||||
|
X4.115Y-3.895
|
||||||
|
X4.115Y-3.995
|
||||||
|
X4.115Y-4.095
|
||||||
|
X4.115Y-4.195
|
||||||
|
X4.115Y-4.295
|
||||||
|
X4.115Y-4.395
|
||||||
|
X4.115Y-4.495
|
||||||
|
X4.115Y-4.595
|
||||||
|
X4.115Y-4.695
|
||||||
|
X4.115Y-4.795
|
||||||
|
X4.115Y-4.895
|
||||||
|
X4.365Y-3.0041
|
||||||
|
X4.465Y-3.0041
|
||||||
|
X4.565Y-3.0041
|
||||||
|
X4.815Y-2.995
|
||||||
|
X4.815Y-3.095
|
||||||
|
X4.815Y-3.195
|
||||||
|
X4.815Y-3.295
|
||||||
|
X4.815Y-3.395
|
||||||
|
X4.815Y-3.495
|
||||||
|
X4.815Y-3.595
|
||||||
|
X4.815Y-3.695
|
||||||
|
X4.815Y-3.795
|
||||||
|
X4.815Y-3.895
|
||||||
|
X4.815Y-3.995
|
||||||
|
X4.815Y-4.095
|
||||||
|
X4.815Y-4.195
|
||||||
|
X4.815Y-4.295
|
||||||
|
X4.815Y-4.395
|
||||||
|
X4.815Y-4.495
|
||||||
|
X4.815Y-4.595
|
||||||
|
X4.815Y-4.695
|
||||||
|
X4.815Y-4.795
|
||||||
|
X4.815Y-4.895
|
||||||
|
T8
|
||||||
|
X3.1474Y-4.67
|
||||||
|
X3.1474Y-4.926
|
||||||
|
X3.3246Y-4.67
|
||||||
|
X3.3246Y-4.926
|
||||||
|
T9
|
||||||
|
X2.945Y-3.015
|
||||||
|
X2.945Y-4.83
|
||||||
|
X6.24Y-3.02
|
||||||
|
X6.24Y-4.83
|
||||||
|
T0
|
||||||
|
M30
|
||||||
|
|
@ -0,0 +1,127 @@
|
||||||
|
{
|
||||||
|
"Header": {
|
||||||
|
"GenerationSoftware": {
|
||||||
|
"Vendor": "KiCad",
|
||||||
|
"Application": "Pcbnew",
|
||||||
|
"Version": "6.0.1"
|
||||||
|
},
|
||||||
|
"CreationDate": "2022-02-28T04:04:16+01:00"
|
||||||
|
},
|
||||||
|
"GeneralSpecs": {
|
||||||
|
"ProjectId": {
|
||||||
|
"Name": "glitcher",
|
||||||
|
"GUID": "676c6974-6368-4657-922e-6b696361645f",
|
||||||
|
"Revision": "4"
|
||||||
|
},
|
||||||
|
"Size": {
|
||||||
|
"X": 91.998,
|
||||||
|
"Y": 54.3273
|
||||||
|
},
|
||||||
|
"LayerNumber": 2,
|
||||||
|
"BoardThickness": 1.6,
|
||||||
|
"Finish": "None"
|
||||||
|
},
|
||||||
|
"DesignRules": [
|
||||||
|
{
|
||||||
|
"Layers": "Outer",
|
||||||
|
"PadToPad": 0.0,
|
||||||
|
"PadToTrack": 0.0,
|
||||||
|
"TrackToTrack": 0.2,
|
||||||
|
"MinLineWidth": 0.25,
|
||||||
|
"TrackToRegion": 0.508,
|
||||||
|
"RegionToRegion": 0.508
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"FilesAttributes": [
|
||||||
|
{
|
||||||
|
"Path": "glitcher-F_Cu.gbr",
|
||||||
|
"FileFunction": "Copper,L1,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-B_Cu.gbr",
|
||||||
|
"FileFunction": "Copper,L2,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-F_Paste.gbr",
|
||||||
|
"FileFunction": "SolderPaste,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-B_Paste.gbr",
|
||||||
|
"FileFunction": "SolderPaste,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-F_Silkscreen.gbr",
|
||||||
|
"FileFunction": "Legend,Top",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-B_Silkscreen.gbr",
|
||||||
|
"FileFunction": "Legend,Bot",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-F_Mask.gbr",
|
||||||
|
"FileFunction": "SolderMask,Top",
|
||||||
|
"FilePolarity": "Negative"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-B_Mask.gbr",
|
||||||
|
"FileFunction": "SolderMask,Bot",
|
||||||
|
"FilePolarity": "Negative"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Path": "glitcher-Edge_Cuts.gbr",
|
||||||
|
"FileFunction": "Profile",
|
||||||
|
"FilePolarity": "Positive"
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"MaterialStackup": [
|
||||||
|
{
|
||||||
|
"Type": "Legend",
|
||||||
|
"Name": "Top Silk Screen"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderPaste",
|
||||||
|
"Name": "Top Solder Paste"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderMask",
|
||||||
|
"Thickness": 0.01,
|
||||||
|
"Name": "Top Solder Mask"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "F.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Dielectric",
|
||||||
|
"Thickness": 1.51,
|
||||||
|
"Material": "FR4",
|
||||||
|
"Name": "F.Cu/B.Cu",
|
||||||
|
"Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Copper",
|
||||||
|
"Thickness": 0.035,
|
||||||
|
"Name": "B.Cu"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderMask",
|
||||||
|
"Thickness": 0.01,
|
||||||
|
"Name": "Bottom Solder Mask"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "SolderPaste",
|
||||||
|
"Name": "Bottom Solder Paste"
|
||||||
|
},
|
||||||
|
{
|
||||||
|
"Type": "Legend",
|
||||||
|
"Name": "Bottom Silk Screen"
|
||||||
|
}
|
||||||
|
]
|
||||||
|
}
|
||||||
3279
glitcher.kicad_pcb
3279
glitcher.kicad_pcb
File diff suppressed because it is too large
Load Diff
|
|
@ -1044,7 +1044,7 @@
|
||||||
(reference "Q1") (unit 1) (value "Q_NMOS_GSD") (footprint "Package_TO_SOT_SMD:SOT-23")
|
(reference "Q1") (unit 1) (value "Q_NMOS_GSD") (footprint "Package_TO_SOT_SMD:SOT-23")
|
||||||
)
|
)
|
||||||
(path "/816681b3-b696-4c69-b9f3-698a68596d52/1fc4ec78-492d-4bdc-a59b-9e31cf2fc7c1"
|
(path "/816681b3-b696-4c69-b9f3-698a68596d52/1fc4ec78-492d-4bdc-a59b-9e31cf2fc7c1"
|
||||||
(reference "Q300") (unit 1) (value "IRF7404/Si4850BDY/Si3464BDY") (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm")
|
(reference "Q300") (unit 1) (value "IRF7807/Si4850BDY/Si3464BDY") (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm")
|
||||||
)
|
)
|
||||||
(path "/816681b3-b696-4c69-b9f3-698a68596d52/78ddc647-21c5-4ed8-8a1b-7c7e636c63bd"
|
(path "/816681b3-b696-4c69-b9f3-698a68596d52/78ddc647-21c5-4ed8-8a1b-7c7e636c63bd"
|
||||||
(reference "Q301") (unit 1) (value "IRLML2502/IRLML6204") (footprint "Package_TO_SOT_SMD:SOT-23")
|
(reference "Q301") (unit 1) (value "IRLML2502/IRLML6204") (footprint "Package_TO_SOT_SMD:SOT-23")
|
||||||
|
|
|
||||||
Binary file not shown.
|
After Width: | Height: | Size: 389 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 395 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 390 KiB |
Loading…
Reference in New Issue