mspdebug/flash_bsl.c

706 lines
16 KiB
C
Raw Normal View History

/* MSPDebug - debugging tool for the eZ430
* Copyright (C) 2009, 2010 Daniel Beer
* Copyright (C) 2010 Andrew Armenia
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <string.h>
#include <stdint.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#include "flash_bsl.h"
#include "util.h"
#include "output.h"
#include "fet_error.h"
struct flash_bsl_device {
struct device base;
int serial_fd;
int long_password;
};
#define MAX_PACKET 256
/* adapted from TI's published BSL source code */
#define CRC_INIT 0xffff
static uint16_t crc_ccitt(const uint8_t *data, int len) {
uint16_t crc = CRC_INIT;
uint16_t temp;
int i;
for (i = 0; i < len; ++i) {
temp = ((crc >> 8) ^ data[i]) & 0xff;
temp ^= (temp >> 4);
crc = (crc << 8) ^ (temp << 12) ^ (temp << 5) ^ temp;
}
return crc;
}
static void crc_selftest(void) {
/* These test vectors are from page 30 of TI doc SLAU319A */
uint16_t crc_expected = 0x5590;
uint16_t crc_actual = crc_ccitt((uint8_t *)"\x52\x02", 2);
if (crc_expected != crc_actual) {
printc_err("flash_bsl: CRC malfunction (expected 0x%04x got 0x%04x)\n",
crc_expected, crc_actual);
}
crc_expected = 0x121d;
crc_actual = crc_ccitt((uint8_t *)"\x3a\x04\x01", 3);
if (crc_expected != crc_actual) {
printc_err("flash_bsl: CRC malfunction (expected 0x%04x got 0x%04x)\n",
crc_expected, crc_actual);
}
crc_expected = 0x528b;
crc_actual = crc_ccitt((uint8_t *)"\x1a", 1);
if (crc_expected != crc_actual) {
printc_err("flash_bsl: CRC malfunction (expected 0x%04x got 0x%04x)\n",
crc_expected, crc_actual);
}
}
#define RX_DATA_BLOCK 0x10
#define RX_DATA_BLOCK_FAST 0x1b
#define RX_PASSWORD 0x11
#define ERASE_SEGMENT 0x12
#define UNLOCK_LOCK_INFO 0x13
#define MASS_ERASE 0x15
#define CRC_CHECK 0x16
#define LOAD_PC 0x17
#define TX_DATA_BLOCK 0x18
#define TX_BSL_VERSION 0x19
#define TX_BUFFER_SIZE 0x1a
static int flash_bsl_send(struct flash_bsl_device *dev, const uint8_t *data, int len)
{
uint16_t crc;
uint8_t cmd_buf[MAX_PACKET + 5];
uint8_t response;
#if defined(FLASH_BSL_VERBOSE)
debug_hexdump("flash_bsl: sending", data, len);
#endif
crc = crc_ccitt(data, len);
if (len > MAX_PACKET) {
printc_err("flash_bsl: attempted to transmit long packet (len=%d)\n", len);
return -1;
}
cmd_buf[0] = 0x80;
cmd_buf[1] = (len & 0xff);
cmd_buf[2] = (len >> 8) & 0xff;
memcpy(cmd_buf + 3, data, len);
cmd_buf[len + 3] = (crc & 0xff);
cmd_buf[len + 4] = (crc >> 8) & 0xff;
if (write_all(dev->serial_fd, cmd_buf, len + 5) < 0) {
printc_err("flash_bsl: serial write failed\n");
return -1;
}
if (read_all_with_timeout(dev->serial_fd, &response, 1) < 0) {
if (errno == ETIMEDOUT) {
printc_err("flash_bsl: serial read timed out\n");
} else {
printc_err("flash_bsl: serial read failed\n");
}
return -1;
}
if (response != 0) {
switch (response) {
case 0x51:
printc_err("flash_bsl: BSL reports incorrect packet header\n");
break;
case 0x52:
printc_err("flash_bsl: BSL reports checksum incorrect\n");
break;
case 0x53:
printc_err("flash_bsl: BSL got zero-size packet\n");
break;
case 0x54:
printc_err("flash_bsl: BSL receive buffer overflowed\n");
break;
case 0x55:
printc_err("flash_bsl: (known-)unknown error\n");
break;
case 0x56:
printc_err("flash_bsl: unknown baud rate\n");
break;
default:
printc_err("flash_bsl: unknown unknown error\n");
break;
}
return -1;
}
return 0;
}
static int flash_bsl_recv(struct flash_bsl_device *dev,
uint8_t *recv_buf, int buf_len)
{
uint8_t header[3];
uint8_t crc_bytes[2];
uint16_t recv_len;
uint16_t crc_value;
if (read_all_with_timeout(dev->serial_fd, header, 3) < 0) {
if (errno == ETIMEDOUT) {
printc_err("flash_bsl: response timed out\n");
return -1;
} else {
perror("read response header");
printc_err("flash_bsl: read response failed\n");
return -1;
}
}
if (header[0] != 0x80) {
printc_err("flash_bsl: incorrect response header received\n");
return -1;
}
recv_len = header[2];
recv_len <<= 8;
recv_len |= header[1];
#if defined(FLASH_BSL_VERBOSE)
printc_dbg("flash_bsl: incoming message length %d\n", recv_len);
#endif
if (recv_len > buf_len) {
printc_err("flash_bsl: insufficient buffer to receive data\n");
return -1;
}
if (read_all_with_timeout(dev->serial_fd, recv_buf, recv_len) < 0) {
perror("receive message");
printc_err("flash_bsl: error receiving message\n");
return -1;
}
if (read_all_with_timeout(dev->serial_fd, crc_bytes, 2) < 0) {
perror("receive message CRC");
printc_err("flash_bsl: error receiving message CRC\n");
return -1;
}
crc_value = crc_bytes[1];
crc_value <<= 8;
crc_value |= crc_bytes[0];
if (crc_ccitt(recv_buf, recv_len) != crc_value) {
printc_err("flash_bsl: received message with bad CRC\n");
return -1;
}
#if defined(FLASH_BSL_VERBOSE)
debug_hexdump("received message", recv_buf, recv_len);
#endif
usleep(10000);
return recv_len;
}
static void flash_bsl_perror(uint8_t code) {
switch (code) {
case 0x00:
printc_err("flash_bsl: success\n");
break;
case 0x01:
printc_err("flash_bsl: FLASH verify failed\n");
break;
case 0x02:
printc_err("flash_bsl: FLASH operation failed\n");
break;
case 0x03:
printc_err("flash_bsl: voltage not constant during program\n");
break;
case 0x04:
printc_err("flash_bsl: BSL is locked\n");
break;
case 0x05:
printc_err("flash_bsl: incorrect password\n");
break;
case 0x06:
printc_err("flash_bsl: attempted byte write to FLASH\n");
break;
case 0x07:
printc_err("flash_bsl: unrecognized command\n");
break;
case 0x08:
printc_err("flash_bsl: command was too long\n");
break;
default:
printc_err("flash_bsl: unknown status message\n");
break;
}
}
#define MAX_BLOCK 256
static int flash_bsl_readmem(device_t dev_base,
address_t addr, uint8_t *mem, address_t len)
{
struct flash_bsl_device *dev = (struct flash_bsl_device *)dev_base;
uint8_t recv_buf[MAX_BLOCK*2];
uint8_t send_buf[64];
uint16_t read_size;
int ret;
2010-09-25 08:29:38 +00:00
if (addr > 0xfffff || addr + len > 0x100000) {
printc_err("flash_bsl: read exceeds possible range\n");
return -1;
}
while (len > 0) {
if (len > MAX_BLOCK) {
read_size = MAX_BLOCK;
} else {
read_size = len;
}
/* build command */
send_buf[0] = TX_DATA_BLOCK; /* command: transmit data block */
send_buf[1] = addr & 0xff;
send_buf[2] = (addr >> 8) & 0xff;
send_buf[3] = (addr >> 16) & 0xff;
send_buf[4] = read_size & 0xff;
send_buf[5] = (read_size >> 8) & 0xff;
if (flash_bsl_send(dev, send_buf, 6) < 0) {
printc_err("flash_bsl readmem: send failed\n");
return -1;
}
ret = flash_bsl_recv(dev, recv_buf, read_size + 1);
if (ret < 0) {
printc_err("flash_bsl readmem: receive failed\n");
return -1;
} else if (ret < read_size) {
printc_err("flash_bsl readmem: warning: not all requested data received\n");
}
if (recv_buf[0] == 0x3a) {
memcpy(mem, recv_buf + 1, ret - 1);
len -= ret - 1;
mem += ret - 1;
} else if (recv_buf[0] == 0x3b) {
flash_bsl_perror(recv_buf[1]);
} else {
printc_err("flash_bsl readmem: invalid response\n");
return -1;
}
}
return 0;
}
static int flash_bsl_erase(device_t dev_base, device_erase_type_t type,
address_t addr)
{
struct flash_bsl_device *dev = (struct flash_bsl_device *)dev_base;
uint8_t erase_cmd[4];
uint8_t response_buffer[16];
int ret;
if (type == DEVICE_ERASE_ALL) {
printc_err("flash_bsl_erase: simultaneous code/info erase not supported\n");
return -1;
} else if (type == DEVICE_ERASE_MAIN) {
erase_cmd[0] = MASS_ERASE;
if (flash_bsl_send(dev, erase_cmd, 1) < 0) {
printc_err("flash_bsl_erase: failed to send erase command\n");
return -1;
}
} else if (type == DEVICE_ERASE_SEGMENT) {
erase_cmd[0] = ERASE_SEGMENT;
erase_cmd[1] = addr & 0xff;
erase_cmd[2] = (addr >> 8) & 0xff;
erase_cmd[3] = (addr >> 16) & 0xff;
if (flash_bsl_send(dev, erase_cmd, 4) < 0) {
printc_err("flash_bsl_erase: failed to send erase command\n");
return -1;
}
} else {
printc_err("flash_bsl_erase: unsupported erase type\n");
return -1;
}
ret = flash_bsl_recv(dev, response_buffer, sizeof(response_buffer));
if (ret < 2) {
printc_err("flash_bsl_erase: no response\n");
return -1;
}
if (response_buffer[0] != 0x3b) {
printc_err("flash_bsl_erase: incorrect response\n");
return -1;
}
if (response_buffer[1] != 0) {
flash_bsl_perror(response_buffer[1]);
printc_err("flash_bsl_erase: erase failed\n");
return -1;
} else {
#if defined(FLASH_BSL_VERBOSE)
printc_dbg("flash_bsl_erase: success\n");
#endif
}
return 0;
}
static int flash_bsl_unlock(struct flash_bsl_device *dev)
{
/*
* after erase, the password will be 0xff * (16 or 32)
* (an empty interrupt vector table)
*/
uint8_t rx_password_cmd[33] = "\x11"
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff";
uint8_t response_buffer[16];
int ret;
/* mass erase - this might wipe Information Memory on some devices */
/* (according to the documentation it should not) */
if (flash_bsl_erase((device_t)dev, DEVICE_ERASE_MAIN, 0) < 0) {
printc_err("flash_bsl_unlock: warning: erase failed\n");
}
/* send password (which is now erased FLASH) */
if (dev->long_password) {
#if defined(FLASH_BSL_VERBOSE)
printc_dbg("flash_bsl_unlock: using long password\n");
#endif
}
if (flash_bsl_send(dev, rx_password_cmd, dev->long_password ? 33 : 17) < 0) {
printc_err("flash_bsl_unlock: send password failed\n");
return -1;
}
ret = flash_bsl_recv(dev, response_buffer, sizeof(response_buffer));
if (ret < 2) {
printc_err("flash_bsl_unlock: error receiving password response\n");
return -1;
}
if (response_buffer[0] != 0x3b) {
printc_err("flash_bsl_unlock: received invalid password response\n");
return -1;
}
if (response_buffer[1] != 0x00) {
flash_bsl_perror(response_buffer[1]);
printc_err("flash_bsl_unlock: password error\n");
return -1;
}
return 0;
}
static int flash_bsl_ctl(device_t dev_base, device_ctl_t type)
{
switch (type) {
case DEVICE_CTL_HALT:
/* Ignore halt requests */
return 0;
case DEVICE_CTL_RESET:
/* Ignore reset requests */
return 0;
default:
printc_err("flash_bsl: CPU control is not possible\n");
}
return -1;
}
static device_status_t flash_bsl_poll(device_t dev_base)
{
return DEVICE_STATUS_HALTED;
}
static int flash_bsl_getregs(device_t dev_base, address_t *regs)
{
printc_err("flash_bsl: register fetch is not implemented\n");
return -1;
}
static int flash_bsl_setregs(device_t dev_base, const address_t *regs)
{
printc_err("flash_bsl: register store is not implemented\n");
return -1;
}
static int flash_bsl_writemem(device_t dev_base,
address_t addr, const uint8_t *mem, address_t len)
{
struct flash_bsl_device *dev = (struct flash_bsl_device *)dev_base;
uint8_t send_buf[2*MAX_BLOCK];
uint8_t recv_buf[16];
uint16_t write_size;
int n_recv;
2010-09-25 08:29:38 +00:00
if (addr > 0xfffff || addr + len > 0x100000) {
printc_err("flash_bsl: write exceeds possible range\n");
return -1;
}
while (len > 0) {
/* compute size of this write operation */
if (len > MAX_BLOCK) {
write_size = MAX_BLOCK;
} else {
write_size = len;
}
/* build write command */
/* command */
send_buf[0] = RX_DATA_BLOCK;
/* address */
send_buf[1] = addr & 0xff;
send_buf[2] = (addr >> 8) & 0xff;
send_buf[3] = (addr >> 16) & 0xff;
/* data */
memcpy(&send_buf[4], mem, write_size);
mem += write_size;
len -= write_size;
/* send command */
if (flash_bsl_send(dev, send_buf, write_size + 4) < 0) {
printc_err("flash_bsl: send failed\n");
return -1;
}
/* receive and check response */
n_recv = flash_bsl_recv(dev, recv_buf, sizeof(recv_buf));
if (n_recv < 0) {
printc_err("flash_bsl write: error occurred receiving response\n");
return -1;
} else if (n_recv < 2) {
printc_err("flash_bsl write: response too short\n");
return -1;
} else if (recv_buf[0] != 0x3b) {
printc_err("flash_bsl write: invalid response received\n");
return -1;
} else if (recv_buf[1] != 0x00) {
printc_err("flash_bsl write: BSL reported write error: ");
flash_bsl_perror(recv_buf[1]);
return -1;
}
/* else success! */
}
return 0;
}
static void entry_delay(void)
{
usleep(1000);
}
static int set_serial_bits(int fd, int bits)
{
if (ioctl(fd, TIOCMSET, &bits) >= 0) {
return 0;
} else {
return -1;
}
}
static int enter_via_dtr_rts(struct flash_bsl_device *dev)
{
/*
* Implement the sequence shown on page 8 of TI document SLAU319A,
* via serial-port control lines.
*/
int fd = dev->serial_fd;
/* drive RST# line low */
if (set_serial_bits(fd, TIOCM_RTS | TIOCM_DTR) != 0) {
return -1;
}
entry_delay( );
/* drive TEST line high then low again */
if (set_serial_bits(fd, TIOCM_DTR) != 0) {
return -1;
}
entry_delay( );
if (set_serial_bits(fd, TIOCM_RTS | TIOCM_DTR) != 0) {
return -1;
}
entry_delay( );
/* drive TEST line high followed by RST# line */
if (set_serial_bits(fd, TIOCM_DTR) != 0) {
return -1;
}
entry_delay( );
if (set_serial_bits(fd, 0) != 0) {
return -1;
}
entry_delay( );
if (set_serial_bits(fd, TIOCM_RTS) != 0) {
return -1;
}
entry_delay( );
/* BSL should now be running! */
return 0;
}
static void exit_via_dtr_rts(struct flash_bsl_device *dev)
{
int fd = dev->serial_fd;
/* RST# and TEST LOW */
set_serial_bits(fd, TIOCM_RTS | TIOCM_DTR);
/* wait a brief period */
entry_delay( );
/* RST# HIGH */
set_serial_bits(fd, TIOCM_DTR);
}
static void flash_bsl_destroy(device_t dev_base)
{
struct flash_bsl_device *dev = (struct flash_bsl_device *)dev_base;
exit_via_dtr_rts(dev);
close(dev->serial_fd);
free(dev);
}
static device_t flash_bsl_open(const struct device_args *args)
{
struct flash_bsl_device *dev;
uint8_t tx_bsl_version_command[] = { TX_BSL_VERSION };
uint8_t tx_bsl_version_response[5];
if (!(args->flags & DEVICE_FLAG_TTY)) {
printc_err("This driver does not support raw USB access.\n");
return NULL;
}
dev = malloc(sizeof(*dev));
if (!dev) {
pr_error("flash_bsl: can't allocate memory");
return NULL;
}
crc_selftest( );
memset(dev, 0, sizeof(*dev));
dev->base.type = &device_flash_bsl;
dev->serial_fd = open_serial_even_parity(args->path, B9600);
if (dev->serial_fd < 0) {
printc_err("flash_bsl: can't open %s: %s\n",
args->path, strerror(errno));
free(dev);
return NULL;
}
dev->long_password = args->flags & DEVICE_FLAG_LONG_PW;
/* enter bootloader */
if (enter_via_dtr_rts(dev) < 0) {
goto fail;
}
usleep(500000);
/* unlock device (erase then send password) */
if (flash_bsl_unlock(dev) < 0) {
goto fail;
}
if (flash_bsl_send(dev, tx_bsl_version_command, sizeof(tx_bsl_version_command)) < 0) {
printc_err("flash_bsl: failed to read BSL version");
goto fail;
}
if (flash_bsl_recv(dev, tx_bsl_version_response,
sizeof(tx_bsl_version_response)) < sizeof(tx_bsl_version_response)) {
printc_err("flash_bsl: BSL responded with invalid version");
goto fail;
}
debug_hexdump("BSL version", tx_bsl_version_response,
sizeof(tx_bsl_version_response));
return (device_t)dev;
fail:
close(dev->serial_fd);
free(dev);
return NULL;
}
const struct device_class device_flash_bsl = {
.name = "flash-bsl",
.help = "TI generic flash-based bootloader via RS-232",
.open = flash_bsl_open,
.destroy = flash_bsl_destroy,
.readmem = flash_bsl_readmem,
.writemem = flash_bsl_writemem,
.getregs = flash_bsl_getregs,
.setregs = flash_bsl_setregs,
.ctl = flash_bsl_ctl,
.poll = flash_bsl_poll,
.erase = flash_bsl_erase
};