0e58358bb1
fet3: driver for eZ-FET debuggers.
...
This driver is experimental. It supports flash/memory access and basic
CPU control. It doesn't support breakpoints.
2013-09-08 13:41:55 +12:00
a64c940a20
loadbsl: trigger PUC on exit.
2013-07-23 10:28:52 +12:00
0c5751275d
loadbsl: retry password if first attempt fails.
2013-07-22 11:04:19 +12:00
d3b57a5cd7
New driver: load-bsl.
...
This driver supports the USB bootstrap loader. An initial version query
is performed on startup. If the running loader is not sufficiently
featureful, a software image for an upgraded BSL is loaded into the
chip's RAM and executed.
2013-07-18 14:03:29 +12:00
47c0349de2
Fixed DADD implementation.
...
Implemented DADD as addition of BCD numbers like it is supposed to be.
2013-05-27 09:05:36 +12:00
ef41b1cbab
Fixed cycle counts in disassembly.
...
Fixed the cycle count for single op indirect and autoincrement
addressing.
2013-05-27 09:05:36 +12:00
c141f5e5e1
Fixed symbolic addressing mode
...
Due to a too early increment of the program counter all symbolic
addressed x(PC) memory accesses have offseted by 2.
2013-05-27 09:05:36 +12:00
df6f0ec3bc
Add --fet-skip-close option.
...
Supplying this option causes the JTAG close procedure to be skipped
when closing the FET driver.
2013-05-21 15:59:17 +12:00
9226cbf566
Add support for MSP430FR5729.
2013-05-14 21:42:02 +12:00
cb4091f121
fet_core: fall-back on Olimex identification database.
2013-04-23 08:32:11 +12:00
a0499ab6f0
Add support for MSP430G2955.
2013-04-05 09:43:24 +13:00
eacf4b8be4
sim: fix PC-relative operand fetch.
...
Index should be relative to the value of PC after fetching the index
word.
2013-03-26 09:25:33 +13:00
9bbe525776
Add support for MSP430FR5728.
2013-03-10 16:25:58 +13:00
5ccf2e35d2
fet_core: fix segment erase.
...
A non-zero length must be supplied to the firmware.
2013-03-10 15:28:36 +13:00
a304b60dc9
fet_core: fix missing newline in debug message.
2013-02-22 10:45:05 +13:00
e9b6a77414
dis/sim: fix handling of opcodes with two indexed operands.
...
If the source operand is indexed, and the destination is symbolic (PC +
index), then the base for the destination index is the program counter
*after* having fetched the source index.
Also, the addition of the index is done modulo 2^16 if the base points
within the lower 64 kB of memory.
2013-02-11 11:08:43 +13:00
72e781d0eb
fet_core: Add workaround for CC5137 replug problem.
...
This chip needs to be replugged if the the shutdown procedure (reset and
close) runs. We look for the chip's ID and skip the procedure if it
matches.
2013-02-01 08:09:38 +13:00
2924dee3a2
fet: experimental support for Info A/BSL flash access.
2013-01-31 14:29:14 +13:00
fd0199901c
tilib: support for Info A/BSL flash access.
...
Two new boolean options have been added: "enable_locked_flash_access"
and "enable_bsl_access".
2013-01-31 13:54:19 +13:00
46ac7a75a9
tilib: fix segment erase.
...
A non-zero length is required to erase segments.
2013-01-31 13:22:05 +13:00
85c023d758
Support for MSP430FG4616.
2013-01-27 10:40:37 +13:00
db94eab4b2
Simulator bug fixes.
...
Fix handling of V flag, and ensure that high byte is discarded for byte
operations.
2013-01-14 16:47:59 +13:00
e491e14c3d
fet_db: add support for MSP430G2352
2012-12-03 12:04:58 +13:00
21fc0d904f
fet_db: add support for MSP430F2416
...
Based on ID data from Pawel Jewstafjew <pawel.jewstafjew@gmail.com>.
2012-11-23 11:41:45 +13:00
277a795f01
Add power sample output.
2012-10-24 09:37:46 +13:00
43735da212
fet: fix support for MSP430F2418/2618.
2012-10-22 16:43:07 +13:00
e14a578555
Parallel JTAG driver (Linux only for now).
...
Based on a patch submitted by Peter Bägel <peter@baegel.de>.
2012-10-12 11:33:20 +13:00
61fdfd22ff
Better threading functions.
...
Change prefix to "thread_" and add functions for thread creation and
condition variables.
2012-10-09 15:28:49 +13:00
18cf2a561f
Separate and clean up break handling.
...
Ctrl+C handling is done in ctrlc.c, and a break condition now persists
until the interactive reader begins to process the next command. The
condition is cleared by calling ctrlc_clear().
2012-10-09 09:55:48 +13:00
e4f582b0d7
Fix Ctrl+C handling under Cygwin.
2012-10-04 14:45:57 +12:00
3da52fe100
fet: fix unused variable warning.
2012-10-04 14:24:44 +12:00
cc5aed4c6d
Power history support.
...
This adds a "power" command which can be used to dump power history
samples gathered by the device driver.
2012-10-03 16:29:55 +13:00
1973746d33
New chip identification database for Olimex debuggers.
...
The devicelist table maps chip ID bytes to an enum of devicetype_t. A
separate table provides configuration data for each value of
devicetype_t.
Original patch submitted by Stanimir Bonev <bonev_st@abv.bg>.
2012-10-03 13:41:59 +13:00
c5e93345a0
fet_proto: capture FET error code.
2012-10-03 13:36:09 +13:00
1de9e43187
Better Olimex compatibility.
...
Timeouts have been increased to 30 seconds. Reset is not sent until
after enabling power.
2012-09-28 06:37:32 +12:00
ce64ff10b5
bsl: add support for raw USB access.
2012-09-19 09:02:35 +12:00
15bfda5b6d
Split FET constructors from core methods.
...
Constructors and device class definitions are now contained in fet.c.
The methods which implement the device interface are in fet_core.c, and
these are independent of how the device object is constructed.
2012-09-18 11:17:55 +12:00
1ac9f30024
Separate FET packet parser from driver.
2012-09-13 15:49:19 +12:00
837e1d8e00
Replace "olimex_iso" transport with generic "ftdi".
...
Constructor now takes arguments for vendor/product IDs and baud rate.
2012-09-13 14:53:30 +12:00
1392cea7e1
Replace "uif" transport with generic "comport".
...
The new transport accepts an arbitrary baud rate instead of a
device-type enum.
2012-09-13 14:33:04 +12:00
162d1bc951
Separate Olimex transports and drivers.
...
The "olimex" transport has been divided into "cp210x" and "cdc_acm",
each of which take a specific vendor/product combination in their
constructor. Support for the MSP430-JTAG-ISO-MK2 has been moved into its
own driver instance.
2012-09-13 14:14:59 +12:00
6037c12291
Add support for Olimex firmware updates.
2012-09-11 14:35:31 +12:00
d844adf828
Separate transports from drivers.
...
The transport/ subdirectory now contains implementations of the
transport_t interface, which has been expanded to include flush and
set_modem operations.
2012-09-10 14:22:00 +12:00
239fbb7f94
fet: don't send code memory start address with erase request.
...
Instead, use 0xfffe. This address is always within the range of main
memory, and should allow the request to work even if the chip has been
misidentified.
2012-08-23 16:14:07 +12:00
9f4bb5f303
tilib: fix breakpoint refresh.
...
If a breakpoint is set and then removed, with no refresh in between,
then no handle is ever assigned and so a request to remove the
breakpoint will fail.
2012-08-23 15:00:44 +12:00
f9d271cd64
tilib: fix calling convention for Cygwin.
...
WINAPI wasn't getting defined with gcc-3.
2012-08-23 14:27:27 +12:00
ff42788071
printc: add printf attribute.
2012-08-17 07:37:56 +12:00
53dd7f8188
Add support for MSP430F5521.
2012-08-16 08:55:13 +12:00
84866b78cc
fet: Error messages from MSP430DLLv3 version 3.2.4.5.
2012-08-15 11:34:28 +12:00
c717eed96d
device_probe_id: all output should be debug output.
2012-08-15 08:59:45 +12:00
Daniel Beer
Mario Werner
Paul Haddad
Wolfgang Schwotzer
Bruce G. Burns
Pavel Vymetálek
Tamas TEVESZ