eacf4b8be4
sim: fix PC-relative operand fetch.
...
Index should be relative to the value of PC after fetching the index
word.
2013-03-26 09:25:33 +13:00
9bbe525776
Add support for MSP430FR5728.
2013-03-10 16:25:58 +13:00
5ccf2e35d2
fet_core: fix segment erase.
...
A non-zero length must be supplied to the firmware.
2013-03-10 15:28:36 +13:00
a304b60dc9
fet_core: fix missing newline in debug message.
2013-02-22 10:45:05 +13:00
e9b6a77414
dis/sim: fix handling of opcodes with two indexed operands.
...
If the source operand is indexed, and the destination is symbolic (PC +
index), then the base for the destination index is the program counter
*after* having fetched the source index.
Also, the addition of the index is done modulo 2^16 if the base points
within the lower 64 kB of memory.
2013-02-11 11:08:43 +13:00
72e781d0eb
fet_core: Add workaround for CC5137 replug problem.
...
This chip needs to be replugged if the the shutdown procedure (reset and
close) runs. We look for the chip's ID and skip the procedure if it
matches.
2013-02-01 08:09:38 +13:00
2924dee3a2
fet: experimental support for Info A/BSL flash access.
2013-01-31 14:29:14 +13:00
fd0199901c
tilib: support for Info A/BSL flash access.
...
Two new boolean options have been added: "enable_locked_flash_access"
and "enable_bsl_access".
2013-01-31 13:54:19 +13:00
46ac7a75a9
tilib: fix segment erase.
...
A non-zero length is required to erase segments.
2013-01-31 13:22:05 +13:00
85c023d758
Support for MSP430FG4616.
2013-01-27 10:40:37 +13:00
db94eab4b2
Simulator bug fixes.
...
Fix handling of V flag, and ensure that high byte is discarded for byte
operations.
2013-01-14 16:47:59 +13:00
e491e14c3d
fet_db: add support for MSP430G2352
2012-12-03 12:04:58 +13:00
21fc0d904f
fet_db: add support for MSP430F2416
...
Based on ID data from Pawel Jewstafjew <pawel.jewstafjew@gmail.com>.
2012-11-23 11:41:45 +13:00
277a795f01
Add power sample output.
2012-10-24 09:37:46 +13:00
43735da212
fet: fix support for MSP430F2418/2618.
2012-10-22 16:43:07 +13:00
e14a578555
Parallel JTAG driver (Linux only for now).
...
Based on a patch submitted by Peter Bägel <peter@baegel.de>.
2012-10-12 11:33:20 +13:00
61fdfd22ff
Better threading functions.
...
Change prefix to "thread_" and add functions for thread creation and
condition variables.
2012-10-09 15:28:49 +13:00
18cf2a561f
Separate and clean up break handling.
...
Ctrl+C handling is done in ctrlc.c, and a break condition now persists
until the interactive reader begins to process the next command. The
condition is cleared by calling ctrlc_clear().
2012-10-09 09:55:48 +13:00
e4f582b0d7
Fix Ctrl+C handling under Cygwin.
2012-10-04 14:45:57 +12:00
3da52fe100
fet: fix unused variable warning.
2012-10-04 14:24:44 +12:00
cc5aed4c6d
Power history support.
...
This adds a "power" command which can be used to dump power history
samples gathered by the device driver.
2012-10-03 16:29:55 +13:00
1973746d33
New chip identification database for Olimex debuggers.
...
The devicelist table maps chip ID bytes to an enum of devicetype_t. A
separate table provides configuration data for each value of
devicetype_t.
Original patch submitted by Stanimir Bonev <bonev_st@abv.bg>.
2012-10-03 13:41:59 +13:00
c5e93345a0
fet_proto: capture FET error code.
2012-10-03 13:36:09 +13:00
1de9e43187
Better Olimex compatibility.
...
Timeouts have been increased to 30 seconds. Reset is not sent until
after enabling power.
2012-09-28 06:37:32 +12:00
ce64ff10b5
bsl: add support for raw USB access.
2012-09-19 09:02:35 +12:00
15bfda5b6d
Split FET constructors from core methods.
...
Constructors and device class definitions are now contained in fet.c.
The methods which implement the device interface are in fet_core.c, and
these are independent of how the device object is constructed.
2012-09-18 11:17:55 +12:00
1ac9f30024
Separate FET packet parser from driver.
2012-09-13 15:49:19 +12:00
837e1d8e00
Replace "olimex_iso" transport with generic "ftdi".
...
Constructor now takes arguments for vendor/product IDs and baud rate.
2012-09-13 14:53:30 +12:00
1392cea7e1
Replace "uif" transport with generic "comport".
...
The new transport accepts an arbitrary baud rate instead of a
device-type enum.
2012-09-13 14:33:04 +12:00
162d1bc951
Separate Olimex transports and drivers.
...
The "olimex" transport has been divided into "cp210x" and "cdc_acm",
each of which take a specific vendor/product combination in their
constructor. Support for the MSP430-JTAG-ISO-MK2 has been moved into its
own driver instance.
2012-09-13 14:14:59 +12:00
6037c12291
Add support for Olimex firmware updates.
2012-09-11 14:35:31 +12:00
d844adf828
Separate transports from drivers.
...
The transport/ subdirectory now contains implementations of the
transport_t interface, which has been expanded to include flush and
set_modem operations.
2012-09-10 14:22:00 +12:00
239fbb7f94
fet: don't send code memory start address with erase request.
...
Instead, use 0xfffe. This address is always within the range of main
memory, and should allow the request to work even if the chip has been
misidentified.
2012-08-23 16:14:07 +12:00
9f4bb5f303
tilib: fix breakpoint refresh.
...
If a breakpoint is set and then removed, with no refresh in between,
then no handle is ever assigned and so a request to remove the
breakpoint will fail.
2012-08-23 15:00:44 +12:00
f9d271cd64
tilib: fix calling convention for Cygwin.
...
WINAPI wasn't getting defined with gcc-3.
2012-08-23 14:27:27 +12:00
ff42788071
printc: add printf attribute.
2012-08-17 07:37:56 +12:00
53dd7f8188
Add support for MSP430F5521.
2012-08-16 08:55:13 +12:00
84866b78cc
fet: Error messages from MSP430DLLv3 version 3.2.4.5.
2012-08-15 11:34:28 +12:00
c717eed96d
device_probe_id: all output should be debug output.
2012-08-15 08:59:45 +12:00
29dfb4da84
Stop using usleep().
...
Use nanosleep() on Unix-like systems, and Sleep() on Windows.
2012-08-14 15:51:22 +12:00
4ab905751c
fet: different exit procedure for FRAM devices.
...
This is a partial revert to 0e5c38231b
2012-08-10 08:34:35 +12:00
ae9c212f37
Make device_erase a no-op for FRAM chips.
2012-08-09 15:34:06 +12:00
886fbd59c9
Probe chip ID bytes on startup.
2012-08-09 15:33:56 +12:00
0e5c38231b
rf2500: separate reset and run on exit.
...
This was causing a problem with the MSP430FR5739. Exiting and restarting
mspdebug would cause the reset vector (0xfffe) to be overwritten with
0xff 0xff. This didn't happen if you repowered the board between the
exit and restart.
2012-08-01 11:32:19 +12:00
e02567a712
Merge F2012 and G2231
2012-07-23 09:33:44 +12:00
1e36394136
Implemented basic GoodFET support.
2012-07-18 12:26:55 +12:00
eae3026f5a
flash_bsl: fix error with large block sizes.
2012-07-16 10:05:46 +12:00
69f3a15187
fet_db: updated MSP430G2452.
...
New data contributed by Marc de Hoop <marc@springuin.nl>.
2012-07-06 08:56:34 +12:00
08cd326e66
Fix support for MSP430F2618.
...
Breakpoint count is stored as a byte, not a 16-bit word.
2012-07-06 08:50:44 +12:00
546d716380
fet_db: merge 2553, 2403.
...
These chips can't be distinguished by their ID data.
2012-06-27 14:46:41 +12:00
e6cb2dc51d
tilib: fix DEVICE_ERASE_MAIN.
...
The address given to the library must be one inside main memory.
2012-06-19 10:08:48 +12:00
c243ed04dc
Add support for MSP430F6435.
...
Data contributed by Marc de Hoop <marc@springuin.nl>
2012-06-15 10:13:20 +12:00
dd2c6d997c
Avoid truncating breakpoint address
...
Use of uint16_t caused the stored breakpoint address to be wrong. However,
breakpoints above 64 kiB don't seem to work even with this, so there may
also be a FET issue.
2012-06-13 09:43:04 +12:00
d0b0b04cef
Add support for MSP430G2403.
2012-06-09 11:50:23 +12:00
eb7da81c9c
Added support for MSP430F2252.
2012-05-15 08:38:25 +12:00
6fd161faa7
Add delay_s() for portable sleep() substitute.
2012-05-10 10:00:12 +12:00
2ce7a82657
tilib: automatically detect path to uif when -d is not specified.
2012-04-28 08:45:13 +12:00
09ca20c91c
Add support for read and write watchpoints.
2012-04-25 14:10:26 +12:00
7413531715
gdbc: watchpoint support.
2012-04-25 13:31:56 +12:00
f1e99c38d3
sim: implement watchpoint support.
2012-04-25 13:31:00 +12:00
a354116441
Watchpoint support (only implemented for tilib driver).
2012-04-25 12:43:14 +12:00
a914bc732d
Add support for building on Cygwin.
...
The symbol __Windows__ is defined when building a native (non-Cygwin)
binary.
2012-04-25 11:02:22 +12:00
97f8dce833
fet: remove message 0x30.
...
This apparently isn't necessary after all, and may be the cause of the
high rate of "fuse blown" errors.
2012-03-08 09:20:25 +13:00
4e2185a408
fet: show more chip information (code/RAM ranges).
2012-03-07 10:08:01 +13:00
9f4d327c24
Support for MSP430F6736.
2012-03-07 10:06:01 +13:00
af30ea095a
olimex_iso: fix compilation warnings.
2012-03-03 09:54:11 +13:00
f5f50d0fea
Fix tty driver for Olimex MSP430-JTAG-ISO.
2012-03-02 14:19:39 +13:00
e79d102937
olimex_iso: fix compiler warnings on non-Linux systems.
2012-03-02 14:13:49 +13:00
902c2903c3
Add raw USB driver for Olimex MSP430-JTAG-ISO.
2012-03-02 12:13:11 +13:00
cf5b7f3399
Handle non-standard baud rates in sport_open().
...
This should allow the use of the Olimex MSP430-JTAG-ISO on Windows (and
other platforms, if handling is implemented).
2012-02-29 16:59:41 +13:00
68f968a637
sport: accept baud rates as a plain integer instead of a B* constant.
...
Integer baud rates are converted to B* constants in the implementation.
2012-02-29 16:29:00 +13:00
25da331e21
olimex: fix usbtr_recv.
...
Partial sends need to skip the sent portion of the buffer before
retrying.
2012-02-29 16:08:26 +13:00
bdce08a84a
ti3410: bug fixes for USB send/receive.
...
Send was not skipping buffer position on partial writes. Receive should
not return unless data is available (or a timeout occurs).
2012-02-29 16:04:44 +13:00
d621ad7050
fet: always reset on startup with olimex driver.
...
The latest v2 MSP430-JTAG-TINY devices need a reset to be issued on
startup.
2012-02-24 10:41:57 +13:00
7bf79f4508
Add support for MSP430F2418.
...
Data supplied by Márton Miklós <martonmiklosqdev@gmail.com>.
2012-01-07 10:01:52 +13:00
b21b611962
Add support for MSP430F5329.
2012-01-06 09:20:17 +13:00
711ffbfd1a
olimex: fix V2 tty access, and introduce olimex-v1 driver.
...
The olimex-v1 driver must be used when accessing a V1 device via the
tty interface.
2011-12-26 11:22:04 +13:00
f501ab0843
olimex: fix V2 startup errors.
...
Configuring modem control lines and baud rate is only required for V1
devices.
2011-12-26 11:09:13 +13:00
c425c497e8
Added support for MSP430F5342.
2011-12-21 09:20:42 +13:00
82ec966d5e
tilib: add --require-fw-update option for forced image loading.
2011-12-14 13:11:29 +13:00
805b022a68
uif-bsl: attempt BSL access even if FET firmware is non-operational.
2011-12-14 13:11:02 +13:00
6060b8d1b0
Fix TI library structure definitions: int32_t -> LONG.
2011-11-16 13:45:27 +13:00
e014e4c6d5
Modernise decl styles
2011-11-16 08:42:45 +13:00
d98d990752
Kill unused variables
...
Mark those that are unused but can't be killed accordingly.
2011-11-15 09:26:35 +13:00
033ef33c3f
Stramline Olimex error handling
...
- Make open_interface() fail if any part of the device setup fails
- Make debug messages indicate which control message they belong to
2011-11-14 08:40:01 +13:00
e724c19a26
tilib: breakpoints are now working.
2011-10-18 12:24:44 +13:00
000816adbd
tilib: fetch breakpoint counts and device ID via library API.
2011-10-18 11:55:21 +13:00
d610f6471a
tilib: fixed hangs and crashes on startup/exit.
2011-10-18 11:28:53 +13:00
f18b0c188b
Added TI library driver (experimental).
...
Memory/register read, single-step, run and halt are working.
Breakpoints aren't working, and programming hasn't been tested.
2011-10-14 12:49:04 +13:00
90eeb0d23e
Added necessary definitions for TI library API.
2011-10-14 12:48:38 +13:00
18e3fbac74
Display section names when programming.
...
The binfile extraction and programming code is now aware of section
names when dealing with ELF32 files. The names are displayed when
programming, and chunks in different sections aren't combined, even if
they're contiguous.
2011-10-12 13:52:56 +13:00
f230af2ce9
Added support for MSP430F449.
2011-10-09 19:13:18 +13:00
70b2c0fc4b
Added support for MSP430F2012.
2011-10-04 19:11:30 +13:00
9e42c1e6f4
Fix build errors on Win32.
2011-09-19 04:04:08 +12:00
92c18f32dc
Implemented TI3410 firmware download.
...
Also added TI3410 firmware image, plus Makefile install rules. Added
notes to manual regarding USB support for FET devices.
2011-09-16 16:09:03 +12:00
7de9854661
Implemented TI3410 transport.
...
This allows direct libusb access to FET430UIF and eZ430 devices. It
doesn't yet implement the initial firmware download required to get
the 3410 working.
2011-09-16 14:40:40 +12:00
6ac5c5a618
Restructuring: move drivers into drivers/
2011-09-14 16:15:37 +12:00
Daniel Beer
Wolfgang Schwotzer
Bruce G. Burns
Pavel Vymetálek
Tamas TEVESZ
Peter A. Bigot
Thomas Webel
Wayne Uroda
Roland Haag
Nick Nobody