Daniel Beer
2924dee3a2
fet: experimental support for Info A/BSL flash access.
2013-01-31 14:29:14 +13:00
Daniel Beer
fd0199901c
tilib: support for Info A/BSL flash access.
...
Two new boolean options have been added: "enable_locked_flash_access"
and "enable_bsl_access".
2013-01-31 13:54:19 +13:00
Daniel Beer
46ac7a75a9
tilib: fix segment erase.
...
A non-zero length is required to erase segments.
2013-01-31 13:22:05 +13:00
Wolfgang Schwotzer
85c023d758
Support for MSP430FG4616.
2013-01-27 10:40:37 +13:00
Bruce G. Burns
db94eab4b2
Simulator bug fixes.
...
Fix handling of V flag, and ensure that high byte is discarded for byte
operations.
2013-01-14 16:47:59 +13:00
Pavel Vymetálek
e491e14c3d
fet_db: add support for MSP430G2352
2012-12-03 12:04:58 +13:00
Daniel Beer
21fc0d904f
fet_db: add support for MSP430F2416
...
Based on ID data from Pawel Jewstafjew <pawel.jewstafjew@gmail.com>.
2012-11-23 11:41:45 +13:00
Daniel Beer
277a795f01
Add power sample output.
2012-10-24 09:37:46 +13:00
Daniel Beer
43735da212
fet: fix support for MSP430F2418/2618.
2012-10-22 16:43:07 +13:00
Daniel Beer
e14a578555
Parallel JTAG driver (Linux only for now).
...
Based on a patch submitted by Peter Bägel <peter@baegel.de>.
2012-10-12 11:33:20 +13:00
Daniel Beer
61fdfd22ff
Better threading functions.
...
Change prefix to "thread_" and add functions for thread creation and
condition variables.
2012-10-09 15:28:49 +13:00
Daniel Beer
18cf2a561f
Separate and clean up break handling.
...
Ctrl+C handling is done in ctrlc.c, and a break condition now persists
until the interactive reader begins to process the next command. The
condition is cleared by calling ctrlc_clear().
2012-10-09 09:55:48 +13:00
Daniel Beer
e4f582b0d7
Fix Ctrl+C handling under Cygwin.
2012-10-04 14:45:57 +12:00
Daniel Beer
3da52fe100
fet: fix unused variable warning.
2012-10-04 14:24:44 +12:00
Daniel Beer
cc5aed4c6d
Power history support.
...
This adds a "power" command which can be used to dump power history
samples gathered by the device driver.
2012-10-03 16:29:55 +13:00
Daniel Beer
1973746d33
New chip identification database for Olimex debuggers.
...
The devicelist table maps chip ID bytes to an enum of devicetype_t. A
separate table provides configuration data for each value of
devicetype_t.
Original patch submitted by Stanimir Bonev <bonev_st@abv.bg>.
2012-10-03 13:41:59 +13:00
Daniel Beer
c5e93345a0
fet_proto: capture FET error code.
2012-10-03 13:36:09 +13:00
Daniel Beer
1de9e43187
Better Olimex compatibility.
...
Timeouts have been increased to 30 seconds. Reset is not sent until
after enabling power.
2012-09-28 06:37:32 +12:00
Daniel Beer
ce64ff10b5
bsl: add support for raw USB access.
2012-09-19 09:02:35 +12:00
Daniel Beer
15bfda5b6d
Split FET constructors from core methods.
...
Constructors and device class definitions are now contained in fet.c.
The methods which implement the device interface are in fet_core.c, and
these are independent of how the device object is constructed.
2012-09-18 11:17:55 +12:00
Daniel Beer
1ac9f30024
Separate FET packet parser from driver.
2012-09-13 15:49:19 +12:00
Daniel Beer
837e1d8e00
Replace "olimex_iso" transport with generic "ftdi".
...
Constructor now takes arguments for vendor/product IDs and baud rate.
2012-09-13 14:53:30 +12:00
Daniel Beer
1392cea7e1
Replace "uif" transport with generic "comport".
...
The new transport accepts an arbitrary baud rate instead of a
device-type enum.
2012-09-13 14:33:04 +12:00
Daniel Beer
162d1bc951
Separate Olimex transports and drivers.
...
The "olimex" transport has been divided into "cp210x" and "cdc_acm",
each of which take a specific vendor/product combination in their
constructor. Support for the MSP430-JTAG-ISO-MK2 has been moved into its
own driver instance.
2012-09-13 14:14:59 +12:00
Daniel Beer
6037c12291
Add support for Olimex firmware updates.
2012-09-11 14:35:31 +12:00
Daniel Beer
d844adf828
Separate transports from drivers.
...
The transport/ subdirectory now contains implementations of the
transport_t interface, which has been expanded to include flush and
set_modem operations.
2012-09-10 14:22:00 +12:00
Daniel Beer
239fbb7f94
fet: don't send code memory start address with erase request.
...
Instead, use 0xfffe. This address is always within the range of main
memory, and should allow the request to work even if the chip has been
misidentified.
2012-08-23 16:14:07 +12:00
Daniel Beer
9f4bb5f303
tilib: fix breakpoint refresh.
...
If a breakpoint is set and then removed, with no refresh in between,
then no handle is ever assigned and so a request to remove the
breakpoint will fail.
2012-08-23 15:00:44 +12:00
Daniel Beer
f9d271cd64
tilib: fix calling convention for Cygwin.
...
WINAPI wasn't getting defined with gcc-3.
2012-08-23 14:27:27 +12:00
Daniel Beer
ff42788071
printc: add printf attribute.
2012-08-17 07:37:56 +12:00
Daniel Beer
53dd7f8188
Add support for MSP430F5521.
2012-08-16 08:55:13 +12:00
Tamas TEVESZ
84866b78cc
fet: Error messages from MSP430DLLv3 version 3.2.4.5.
2012-08-15 11:34:28 +12:00
Daniel Beer
c717eed96d
device_probe_id: all output should be debug output.
2012-08-15 08:59:45 +12:00
Daniel Beer
29dfb4da84
Stop using usleep().
...
Use nanosleep() on Unix-like systems, and Sleep() on Windows.
2012-08-14 15:51:22 +12:00
Daniel Beer
4ab905751c
fet: different exit procedure for FRAM devices.
...
This is a partial revert to 0e5c38231b
.
We detect whether the chip is an FRAM device at exit, and use a
different reset type if it is. The referenced commit broke the RST pin
on older chips.
2012-08-10 08:34:35 +12:00
Daniel Beer
ae9c212f37
Make device_erase a no-op for FRAM chips.
2012-08-09 15:34:06 +12:00
Daniel Beer
886fbd59c9
Probe chip ID bytes on startup.
2012-08-09 15:33:56 +12:00
Daniel Beer
0e5c38231b
rf2500: separate reset and run on exit.
...
This was causing a problem with the MSP430FR5739. Exiting and restarting
mspdebug would cause the reset vector (0xfffe) to be overwritten with
0xff 0xff. This didn't happen if you repowered the board between the
exit and restart.
2012-08-01 11:32:19 +12:00
Tamas TEVESZ
e02567a712
Merge F2012 and G2231
2012-07-23 09:33:44 +12:00
Daniel Beer
1e36394136
Implemented basic GoodFET support.
2012-07-18 12:26:55 +12:00
Daniel Beer
eae3026f5a
flash_bsl: fix error with large block sizes.
2012-07-16 10:05:46 +12:00
Daniel Beer
69f3a15187
fet_db: updated MSP430G2452.
...
New data contributed by Marc de Hoop <marc@springuin.nl>.
2012-07-06 08:56:34 +12:00
Daniel Beer
08cd326e66
Fix support for MSP430F2618.
...
Breakpoint count is stored as a byte, not a 16-bit word.
2012-07-06 08:50:44 +12:00
Daniel Beer
546d716380
fet_db: merge 2553, 2403.
...
These chips can't be distinguished by their ID data.
2012-06-27 14:46:41 +12:00
Daniel Beer
e6cb2dc51d
tilib: fix DEVICE_ERASE_MAIN.
...
The address given to the library must be one inside main memory.
2012-06-19 10:08:48 +12:00
Daniel Beer
c243ed04dc
Add support for MSP430F6435.
...
Data contributed by Marc de Hoop <marc@springuin.nl>
2012-06-15 10:13:20 +12:00
Peter A. Bigot
dd2c6d997c
Avoid truncating breakpoint address
...
Use of uint16_t caused the stored breakpoint address to be wrong. However,
breakpoints above 64 kiB don't seem to work even with this, so there may
also be a FET issue.
2012-06-13 09:43:04 +12:00
Daniel Beer
d0b0b04cef
Add support for MSP430G2403.
2012-06-09 11:50:23 +12:00
Thomas Webel
eb7da81c9c
Added support for MSP430F2252.
2012-05-15 08:38:25 +12:00
Daniel Beer
6fd161faa7
Add delay_s() for portable sleep() substitute.
2012-05-10 10:00:12 +12:00