3feecd30b6
Added -s option to distinguish between devices by serial number.
...
Based on patch by Tamas Tevesz <ice@extreme.hu>.
2011-07-18 14:56:29 +12:00
1e21d9da8f
Added support for MSP430FR5739.
...
Use "load" instead of "prog" for programming.
2011-07-06 09:32:36 +12:00
d5ecb69633
Add --force-reset option
...
Without this option MSP430F5526 fails to reset its
registers properly. When the SP register points to
a random address and we try to set a breakpoint with
gdb, it will try to read all memory locations from
SP up to the top of the RAM searching for the return
address in the current stack frame.
On MSP430F47173 initialization fails when not using
reset (command C_IDENT1 failed) and we also need
to fall back to using try_open with send_reset = 1.
Signed-off-by: Ionut Nicu <ionut.nicu@mindbit.ro>
2011-03-27 13:01:00 +13:00
21dab55de1
Fixed incorrect driver names.
2011-03-15 16:08:46 +13:00
41375ba084
Separated FET protocol quirks into flags.
2011-03-15 15:36:50 +13:00
ed2c841da9
Separated device vtables/class information.
2011-03-15 14:56:07 +13:00
b6e241a9e3
Implemented uniform device constructor functions.
2011-03-15 14:20:06 +13:00
e182be2204
Added fet_block_size option.
...
This option controls the buffer size used for transfers to and from the
FET. Increasing it will improve transfer times, but may cause problems
with some chips.
Also, the default request size used for several commands has been
increased to take advantage of this.
2011-02-21 11:30:32 +13:00
9956ecadb5
fet: retry with reset on connect if the first attempt fails.
2010-10-16 17:26:58 +13:00
fd98116298
Merge branch 'erase'
2010-10-12 11:00:28 +13:00
32f45d72de
fet: reset on close, rather than init.
2010-10-12 11:00:09 +13:00
4c7538143c
Erase bug fixes.
2010-09-23 19:34:12 +12:00
1ae163572c
fet: implemented mass and segment erase.
2010-09-23 16:14:21 +12:00
b9e5db63d5
device: altered erase interface to allow different erase types.
2010-09-23 15:45:06 +12:00
ecccfb5a64
fet: change block size to 64 bytes.
...
Have observed crashes of the FET when programming some devices using
128-byte blocks.
2010-09-14 14:56:10 +12:00
218ead5fe5
fet: fix packet size alignment when reading/writing buffers.
2010-09-14 14:54:25 +12:00
93087e534d
prog: removed word-alignment buffering.
2010-09-13 10:40:29 +12:00
46fd2956cd
fet: workaround for unaligned reads/writes.
2010-09-13 10:27:50 +12:00
40fa5de592
Move code_start field into base device class.
2010-09-10 11:40:59 +12:00
2ef8f7574b
fet: by default, reset chip on startup.
2010-09-02 11:55:12 +12:00
1a3f9a9ff3
fet: always show chip name.
2010-09-01 09:34:50 +12:00
9c2ed8c5fc
Introduced quiet mode option and command-line switch.
...
Based on a patch by Eric Decker <cire831@gmail.com>
2010-08-31 15:50:00 +12:00
d2c91feeb0
fet: reduce polling interval to 50 ms (was 500 ms).
2010-08-17 11:54:50 +12:00
87f89adc44
All output now goes through buffering/filtering.
...
The following substitutions have been made:
printf -> printc
fprintf(stderr, ...) -> printc_err(...)
perror -> pr_error
2010-08-17 11:07:03 +12:00
5b2c75563d
Device interface and drivers are now 32-bit clean.
2010-08-05 14:43:07 +12:00
3f6d8f91ad
Moved breakpoint table into device base structure.
...
Breakpoints only ever change by debugger control, so there's no point
having a device-dependent "getbrk" method. Breakpoint update need only
be done before starting the device running.
2010-07-27 13:08:21 +12:00
74a11c1ae0
Implemented support for multiple breakpoints.
2010-07-02 14:22:52 +12:00
eab488da92
fet: continue even if set VCC fails.
...
This is not a fatal error under all circumstances, for example when
debugging a board with external power applied.
2010-07-01 12:25:34 +12:00
cf4ec417ff
Added support for Olimex MSP430-JTAG-TINY.
2010-06-15 14:53:38 +12:00
efabaf5161
Consistent spelling of "Spy-Bi-Wire".
2010-06-15 13:13:51 +12:00
465147cdd4
Added support for MSP430F169
2010-06-15 13:07:06 +12:00
c1bb903b99
Try to use JTAG mode 2 with UIF devices.
2010-06-15 12:56:20 +12:00
9672e24b65
Fixed bug preventing chip identification.
2010-05-21 14:19:15 +12:00
626b0085a0
Added constants for C_CONFIGURE in fet.c.
2010-05-20 13:14:36 +12:00
15b6148cd4
Fixed erase command on chips with code start > 0x8000.
2010-05-20 12:47:03 +12:00
de80453268
Extract useful macros (LE_BYTE, LE_WORD, LE_LONG).
2010-05-19 14:53:43 +12:00
e3e33f2c0d
Corrected MSP430F2013 ID text.
2010-05-19 12:18:31 +12:00
6d0d32c8a0
FET database bug fixes.
2010-05-19 12:02:33 +12:00
a87ad8b834
Added --fet-force-id command-line option.
2010-05-19 11:54:15 +12:00
d69b48bd89
Use fet_db to find magic messages.
2010-05-19 11:31:40 +12:00
fab96c725d
BSL now shows descriptive errors returned by FET.
2010-05-15 13:44:46 +12:00
c96ce58a8f
Took checksum function from uif430.
2010-05-15 13:42:02 +12:00
b8a3ef41c7
Use stdint.h instead of sys/types.h.
2010-05-13 12:57:21 +12:00
c981893254
Transports are now objects.
2010-04-30 16:57:57 +12:00
204aa31291
Device drivers are now objects.
2010-04-30 16:01:03 +12:00
6fa975277b
fet: implemented magic table for FW ver. 20404000
2010-04-28 18:55:37 +12:00
006585e0f7
Modified FET driver for testing with TI Chronos.
2010-04-10 15:44:49 +12:00
7e309acdc5
Separated device commands.
2010-04-10 14:35:36 +12:00
f8f530f24e
Convert FET command constants to hex.
2010-04-09 15:57:41 +12:00
1f8b65870c
Removed per-command checks for fet_is_rf2500.
2010-04-08 15:01:09 +12:00
Daniel Beer
Ionut Nicu
Daniel Beer
Sören Höckner
Eric Decker
Peter Jansen