Commit Graph

16 Commits

Author SHA1 Message Date
Daniel Beer cb765f639d fet_core: reset after erase.
Some versions of the Olimex MSP-JTAG-TINY v2 require this for correct
JTAG function following an erase.
2015-06-11 09:24:27 +12:00
Daniel Beer 5c1805ff2b JTAG fuse blow: add "blow_jtag_fuse" command.
Support exists for this command on FET-like devices (including Olimex)
and the tilib driver.
2013-12-03 07:27:32 +13:00
Daniel Beer b2185061b7 Supress debug chatter in quiet mode. 2013-10-26 09:59:48 +13:00
Daniel Beer df6f0ec3bc Add --fet-skip-close option.
Supplying this option causes the JTAG close procedure to be skipped
when closing the FET driver.
2013-05-21 15:59:17 +12:00
Daniel Beer cb4091f121 fet_core: fall-back on Olimex identification database. 2013-04-23 08:32:11 +12:00
Daniel Beer 5ccf2e35d2 fet_core: fix segment erase.
A non-zero length must be supplied to the firmware.
2013-03-10 15:28:36 +13:00
Daniel Beer a304b60dc9 fet_core: fix missing newline in debug message. 2013-02-22 10:45:05 +13:00
Daniel Beer 72e781d0eb fet_core: Add workaround for CC5137 replug problem.
This chip needs to be replugged if the the shutdown procedure (reset and
close) runs. We look for the chip's ID and skip the procedure if it
matches.
2013-02-01 08:09:38 +13:00
Daniel Beer 2924dee3a2 fet: experimental support for Info A/BSL flash access. 2013-01-31 14:29:14 +13:00
Daniel Beer 277a795f01 Add power sample output. 2012-10-24 09:37:46 +13:00
Daniel Beer 18cf2a561f Separate and clean up break handling.
Ctrl+C handling is done in ctrlc.c, and a break condition now persists
until the interactive reader begins to process the next command. The
condition is cleared by calling ctrlc_clear().
2012-10-09 09:55:48 +13:00
Daniel Beer e4f582b0d7 Fix Ctrl+C handling under Cygwin. 2012-10-04 14:45:57 +12:00
Daniel Beer cc5aed4c6d Power history support.
This adds a "power" command which can be used to dump power history
samples gathered by the device driver.
2012-10-03 16:29:55 +13:00
Daniel Beer 1973746d33 New chip identification database for Olimex debuggers.
The devicelist table maps chip ID bytes to an enum of devicetype_t. A
separate table provides configuration data for each value of
devicetype_t.

Original patch submitted by Stanimir Bonev <bonev_st@abv.bg>.
2012-10-03 13:41:59 +13:00
Daniel Beer 1de9e43187 Better Olimex compatibility.
Timeouts have been increased to 30 seconds. Reset is not sent until
after enabling power.
2012-09-28 06:37:32 +12:00
Daniel Beer 15bfda5b6d Split FET constructors from core methods.
Constructors and device class definitions are now contained in fet.c.
The methods which implement the device interface are in fet_core.c, and
these are independent of how the device object is constructed.
2012-09-18 11:17:55 +12:00