mspdebug fork adding the MehFET driver (USB device code at )
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

226 lines
8.3 KiB

Version 0.25 - 24 Jul 2017
* Various bug fixes and improvements.
* flash_bsl entry using Linux GPIO interface.
* Raw JTAG driver now works on Spy-Bi-Wire targets.
* Raw JTAG bus pirate driver.
* Use HIDAPI on OS/X.
Version 0.24 - 14 May 2016
* Various bug fixes.
* Persistent history and tab completion with libreadline.
* Address expressions now support register names.
* Add support for new 64-bit TI library API.
Version 0.23 - 2 Mar 2015
* Support for raw JTAG via GPIOs.
* Raw JTAG drivers now support single stepping and breakpoints.
* Support for MSP430F5xx USB bootloader.
* Added experimental fet3/eZ-FET driver.
* Added "blow_jtag_fuse" command.
* Added "!" command for dropping to a shell.
* flash_bsl now allows custom entry/exit sequences.
* Added ROM BSL driver.
* Add support for BSL entry via GPIO toggling.
* Many bug and portability fixes.
Version 0.22 - 18 Jul 2013
* Support for erasing/programming information and bootloader
flash memories.
* Support for new chips: MSP430G2352, MSP430FG4616,
MSP430FR5728, MSP430G2955, MSP430FR5729.
* Windows build fixes.
* Various fixes for disassembly and simulation of some types of
* Fixed segment erase for FET-like and tilib drivers.
* Support for alternative and directory-local configuration
* Fixes for Intel HEX file generation.
* Fixed drivers for Olimex MSP430-JTAG-TINY rev 1.
Version 0.21 - 26 Nov 2012
* Support for flat binary files.
* Bug fixes and refactoring of drivers.
* Support for UIF BSL access via USB.
* Support for Olimex MSP430-JTAG-ISO-MK2, including power
* Support for parallel JTAG.
* Support for many new chips when using Olimex drivers.
* Add new interface mode for use with front-ends.
Version 0.20 - 14 Aug 2012
* Support for new chips: MSP430F6736, MSP430F2252, MSP430G2403,
* Support for building under Cygwin.
* Support for watchpoints using MSP430.DLL (tilib) driver.
* Support for GoodFET (memory access/programming only).
* Various bug fixes, including many disassembly fixes and an
issue causing FRAM reset-vector corruption.
* Basic C++ demangling support.
* New commands: "fill" and "verify".
* Erase requests are now ignored when using FRAM chips.
Version 0.19 - 3 Mar 2012
* Support for MSP430-JTAG-ISO on platforms other than Linux, via
both serial drivers and raw USB access.
* Support for new chips: MSP430F5342, MSP430F5329, MSP430F2418.
* Fixed support for later-model MSP430-JTAG-TINY rev 2.
* Fixed build warnings on many systems.
* Fixed output buffering to allow correct interaction with
Eclipse plugins.
Version 0.18 - 8 Nov 2011
* Support for new chips: MSP430F2121, MSP430F2012, MSP430F449.
* Support for raw USB access to FET430UIF and eZ430-F2013.
* Support for TI MSP430 library.
* Various Win32 bug fixes.
* GDB protocol bug fixes.
* Section names are displayed when programming.
Version 0.17 - 24 Aug 2011
* Support for new chips: MSP430FR5739, MSP430F5418,
MSP430AFE253, MSP430F5527, MSP430F5510, MSP430F5528.
* Added -s option to distinguish programming tools by serial
* Ported to Win32 (can be compiled with MinGW).
* Bug fixes for GDB stub interface and simulator.
* Reader now supports tilde-expansion and ^[# key.
* Better diagnostics for FET devices (more error codes).
Version 0.16 - 14 Jun 2011
* Support for new chips: MSP430G2252, MSP430G2553, MSP430F235,
* Added GDB client driver.
* Added support for Olimex MSP-JTAG-TINY rev 2.
* Bug fix in flash-bsl driver for large memory transfers.
Version 0.15 - 5 Apr 2011
* Support for new chips: MSP430G2452, MSP430F5525,
MSP430F47173, MSP430F5526.
* Added --force-reset option.
* Added "alias" command.
* IO peripheral simulator (interrupts, hardware multiplier,
GPIO, Timer_A, Watchdog Timer+).
* Configurable block size for FET memory transfers.
* Fix build problems on Cygwin and OpenBSD.
* Various corrections to manual page.
Version 0.14 - 7 Feb 2011
* Corrected email address in AUTHORS file.
* Support for new chips: MSP430F2272, MSP430F2122.
* Support for different erase types with flash_bsl driver.
* Fixed build problems on OS/X and OpenBSD.
* Bug fix: incorrect simulation of SUB/SUBC/CMP opcodes.
* Bug fix: faulty response to gdb "read registers" command.
Version 0.13 - 9 Nov 2010
* Bug fix: incorrect handling of Intel HEX segment offsets.
* Support for new chips: MSP430F1121, MSP430F2131, MSP430F2617,
MSP430F247, MSP430F4270, MSP430G2231, CC430F5133.
* Support for Olimex MSP430-JTAG-ISO.
* FET driver retries with a reset if the first attempt to
connect fails. This should fix the problem which requires
devices to be replugged after each session.
* Notify the user when programming in quiet mode, and display
version banner unless starting in quiet mode.
Version 0.12 - 12 Oct 2010
* Bug fixes: unaligned flash read/write, reduced memory block
size, MSP430F5438 support, BSL memory ranges.
* Support for MSP430FG4618.
* New commands: load, locka, exit.
* Support for flash BSL (but see notes in manual).
* Preliminary support for segment and mass erase (see "erase"
* Reset is now issued on disconnect, rather than on init.
* Allow specification of default input radix (see "iradix"
* Allow partial unambiguous command matches.
* Repeat execution of certain commands in reader.
* Commands read from a file are now printed as they are
Version 0.11 - 9 Sep 2010
* Support for programming and debugging 20-bit devices.
* Support for MSP430X instruction set.
* Support for new chips: MSP430F2234, CC430F5137, MSP430F2618,
MSP430F1612, MSP430F47197, MSP430F1232, MSP430F413,
* Bug fixes: RF2500 support on OS/X, chip identification using
* Added quiet mode to supress debug output.
* Faster gdb transfers.
* Faster polling with FET driver (quicker single-stepping and
breakpoint detection).
* Commands can now be issued, and output received, via the gdb
interface (using "monitor").
* Support for FET430UIF firmware updates via BSL.
Version 0.10 - 4 Aug 2010
* Bug fixes for gdb interface, FET driver.
* Added support for MSP430F5529.
* Added support for COFF, S19 and TI-Text file formats.
* Support multiple breakpoints (see "setbreak", "delbreak" and
"break" commands).
Version 0.9 - 29 Jun 2010
* Added support for MSP430F2132, MSP430F169.
* Fixed support for FET430UIF JTAG with 5xxx series devices.
* Added support for Olimex MSP-JTAG-TINY programmer.
* Multiple instances of USB programmers can now be used
* Cleaner command line options (see "--help" for information).
Version 0.8 - 22 May 2010
* Bug fixes for disassembly, chip erase, gdb interface,
* Modifications to improve portability to Cygwin and Mac OS X.
* Implemented call graph analysis (see "cgraph" command).
* Better FET protocol support for firmware versions >= 20300000.
Version 0.7 - 30 Apr 2010
* Symbol tables can now be edited and exported (see "sym"
* Bug fixes for disassembly.
* Added option for coloured output.
* Can search memory for instructions matching a pattern (see
"isearch" command).
* Can now include initialization commands in ~/.mspdebug RC
* Address expressions are now algebraic expressions.
* Added support for TI Chronos devices.
* Added support for C-style quoted command arguments.
Version 0.6 - 23 Mar 2010
* Bug fixes for simulation and disassembly.
* Added new commands: erase, mw, read.
* Added support for GNU readline.
* Implemented GDB remote stub (see "gdb" command).
Version 0.5 - 20 Mar 2010
* Added support for BSD-style symbol table files (*.map).
* Disassembly bug fixes.
* Fixed BSL version reporting.
* Added more device IDs.
* Added manual page.
* Added CPU core emulation.
Version 0.4 - 15 Jan 2010
* Bug fixes for FET430UIF devices.
* Added ELF32 support.
* Added symbol table support.
* Added support for the FET430UIF bootloader.
* Added simulation/dummy mode.
* Added "hexout" command for extracting images.
Version 0.3 - 4 Jan 2010
* Better diagnostics (recognises and shows protocol errors).
* Protocol bug fixes for non-RF2500 devices.
* Added JTAG support.
Version 0.2 - 17 Nov 2009
* Added Makefile.
* Added support for FET430UIF and eZ430-F2013 devices.
* Commands can now be executed non-interactively.
Version 0.1 - 15 Oct 2009
* First version.