mspdebug/fet.c

900 lines
22 KiB
C

/* MSPDebug - debugging tool for the eZ430
* Copyright (C) 2009, 2010 Daniel Beer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Various constants and tables come from uif430, written by Robert
* Kavaler (kavaler@diva.com). This is available under the same license
* as this program, from www.relavak.com.
*/
#include <stdio.h>
#include <stdarg.h>
#include <string.h>
#include <assert.h>
#include <unistd.h>
#include "util.h"
#include "device.h"
static const struct fet_transport *fet_transport;
static int fet_is_rf2500;
/**********************************************************************
* FET command codes.
*
* These come from uif430 by Robert Kavaler (kavaler@diva.com).
* www.relavak.com
*/
#define C_INITIALIZE 0x01
#define C_CLOSE 0x02
#define C_IDENTIFY 0x03
#define C_DEVICE 0x04
#define C_CONFIGURE 0x05
#define C_VCC 0x06
#define C_RESET 0x07
#define C_READREGISTERS 0x08
#define C_WRITEREGISTERS 0x09
#define C_READREGISTER 0x0a
#define C_WRITEREGISTER 0x0b
#define C_ERASE 0x0c
#define C_READMEMORY 0x0d
#define C_WRITEMEMORY 0x0e
#define C_FASTFLASHER 0x0f
#define C_BREAKPOINT 0x10
#define C_RUN 0x11
#define C_STATE 0x12
#define C_SECURE 0x13
#define C_VERIFYMEMORY 0x14
#define C_FASTVERIFYMEMORY 0x15
#define C_ERASECHECK 0x16
#define C_EEMOPEN 0x17
#define C_EEMREADREGISTER 0x18
#define C_EEMREADREGISTERTEST 0x19
#define C_EEMWRITEREGISTER 0x1a
#define C_EEMCLOSE 0x1b
#define C_ERRORNUMBER 0x1c
#define C_GETCURVCCT 0x1d
#define C_GETEXTVOLTAGE 0x1e
#define C_FETSELFTEST 0x1f
#define C_FETSETSIGNALS 0x20
#define C_FETRESET 0x21
#define C_READI2C 0x22
#define C_WRITEI2C 0x23
#define C_ENTERBOOTLOADER 0x24
/* Constants for parameters of various FET commands */
#define FET_RUN_FREE 1
#define FET_RUN_STEP 2
#define FET_RUN_BREAKPOINT 3
#define FET_RESET_PUC 0x01
#define FET_RESET_RST 0x02
#define FET_RESET_VCC 0x04
#define FET_RESET_ALL 0x07
#define FET_ERASE_SEGMENT 0
#define FET_ERASE_MAIN 1
#define FET_ERASE_ALL 2
#define FET_POLL_RUNNING 0x01
#define FET_POLL_BREAKPOINT 0x02
/*********************************************************************
* Checksum calculation
*/
static u_int16_t code_left[65536];
/* Initialise the code table. The code table is a function which takes
* us from one checksum position code to the next.
*/
static void init_codes(void)
{
int i;
for (i = 0; i < 65536; i++) {
u_int16_t right = i << 1;
if (i & 0x8000)
right ^= 0x0811;
code_left[right] = i;
}
}
/* Calculate the checksum over the given payload and return it. This checksum
* needs to be stored in little-endian format at the end of the payload.
*/
static u_int16_t calc_checksum(const u_int8_t *data, int len)
{
int i;
u_int16_t cksum = 0xffff;
u_int16_t code = 0x8408;
for (i = len * 8; i; i--)
cksum = code_left[cksum];
for (i = len - 1; i >= 0; i--) {
int j;
u_int8_t c = data[i];
for (j = 0; j < 8; j++) {
if (c & 0x80)
cksum ^= code;
code = code_left[code];
c <<= 1;
}
}
return cksum ^ 0xffff;
}
/*********************************************************************
* FET packet transfer. This level of the interface deals in packets
* send to/from the device.
*/
/* This is a type of data transfer which appears to be unique to
* the RF2500. Blocks of data are sent to an internal buffer. Each
* block is prefixed with a buffer offset and a payload length.
*
* No checksums are included.
*/
static int send_rf2500_data(const u_int8_t *data, int len)
{
int offset = 0;
assert (fet_transport != NULL);
while (len) {
u_int8_t pbuf[63];
int plen = len > 59 ? 59 : len;
pbuf[0] = 0x83;
pbuf[1] = offset & 0xff;
pbuf[2] = offset >> 8;
pbuf[3] = plen;
memcpy(pbuf + 4, data, plen);
if (fet_transport->send(pbuf, plen + 4) < 0)
return -1;
data += plen;
len -= plen;
offset += plen;
}
return 0;
}
static u_int8_t fet_buf[65538];
static int fet_len;
#define MAX_PARAMS 16
/* Recieved packet is parsed into this struct */
static struct {
int command_code;
int state;
int argc;
u_int32_t argv[MAX_PARAMS];
u_int8_t *data;
int datalen;
} fet_reply;
#define BUFFER_BYTE(b, x) ((int)((u_int8_t *)(b))[x])
#define BUFFER_WORD(b, x) ((BUFFER_BYTE(b, x + 1) << 8) | BUFFER_BYTE(b, x))
#define BUFFER_LONG(b, x) ((BUFFER_WORD(b, x + 2) << 16) | BUFFER_WORD(b, x))
#define PTYPE_ACK 0
#define PTYPE_CMD 1
#define PTYPE_PARAM 2
#define PTYPE_DATA 3
#define PTYPE_MIXED 4
#define PTYPE_NAK 5
#define PTYPE_FLASH_ACK 6
/* This table is taken from uif430 */
static const char *error_strings[] =
{
"No error", // 0
"Could not initialize device interface", // 1
"Could not close device interface", // 2
"Invalid parameter(s)", // 3
"Could not find device (or device not supported)", // 4
"Unknown device", // 5
"Could not read device memory", // 6
"Could not write device memory", // 7
"Could not read device configuration fuses", // 8
"Incorrectly configured device; device derivative not supported",// 9
"Could not set device Vcc", // 10
"Could not reset device", // 11
"Could not preserve/restore device memory", // 12
"Could not set device operating frequency", // 13
"Could not erase device memory", // 14
"Could not set device breakpoint", // 15
"Could not single step device", // 16
"Could not run device (to breakpoint)", // 17
"Could not determine device state", // 18
"Could not open Enhanced Emulation Module", // 19
"Could not read Enhanced Emulation Module register", // 20
"Could not write Enhanced Emulation Module register", // 21
"Could not close Enhanced Emulation Module", // 22
"File open error", // 23
"Could not determine file type", // 24
"Unexpected end of file encountered", // 25
"File input/output error", // 26
"File data error", // 27
"Verification error", // 28
"Could not blow device security fuse", // 29
"Could not access device - security fuse is blown", // 30
"Error within Intel Hex file", // 31
"Could not write device Register", // 32
"Could not read device Register", // 33
"Not supported by selected Interface", // 34
"Could not communicate with FET", // 35
"No external power supply detected", // 36
"External power too low", // 37
"External power detected", // 38
"External power too high", // 39
"Hardware Self Test Error", // 40
"Fast Flash Routine experienced a timeout", // 41
"Could not create thread for polling", // 42
"Could not initialize Enhanced Emulation Module", // 43
"Insufficient resources", // 44
"No clock control emulation on connected device", // 45
"No state storage buffer implemented on connected device", // 46
"Could not read trace buffer", // 47
"Enable the variable watch function", // 48
"No trigger sequencer implemented on connected device", // 49
"Could not read sequencer state - Sequencer is disabled", // 50
"Could not remove trigger - Used in sequencer", // 51
"Could not set combination - Trigger is used in sequencer", // 52
"Invalid error number", // 53
};
static int parse_packet(int plen)
{
u_int16_t c = calc_checksum(fet_buf + 2, plen - 2);
u_int16_t r = BUFFER_WORD(fet_buf, plen);
int i = 2;
int type;
int error;
if (c != r) {
fprintf(stderr, "fet: checksum error (calc %04x,"
" recv %04x)\n", c, r);
return -1;
}
if (plen < 6)
goto too_short;
fet_reply.command_code = fet_buf[i++];
type = fet_buf[i++];
fet_reply.state = fet_buf[i++];
error = fet_buf[i++];
if (error) {
fprintf(stderr, "fet: FET returned error code %d\n",
error);
if (error > 0 && error < ARRAY_LEN(error_strings)) {
fprintf(stderr, " (%s)\n", error_strings[error]);
}
return -1;
}
if (type == PTYPE_NAK) {
fprintf(stderr, "fet: FET returned NAK\n");
return -1;
}
/* Parse packet parameters */
if (type == PTYPE_PARAM || type == PTYPE_MIXED) {
int j;
if (i + 2 > plen)
goto too_short;
fet_reply.argc = BUFFER_WORD(fet_buf, i);
i += 2;
if (fet_reply.argc >= MAX_PARAMS) {
fprintf(stderr, "fet: too many params: %d\n",
fet_reply.argc);
return -1;
}
for (j = 0; j < fet_reply.argc; j++) {
if (i + 4 > plen)
goto too_short;
fet_reply.argv[j] = BUFFER_LONG(fet_buf, i);
i += 4;
}
} else {
fet_reply.argc = 0;
}
/* Extract a pointer to the data */
if (type == PTYPE_DATA || type == PTYPE_MIXED) {
if (i + 4 > plen)
goto too_short;
fet_reply.datalen = BUFFER_LONG(fet_buf, i);
i += 4;
if (i + fet_reply.datalen > plen)
goto too_short;
fet_reply.data = fet_buf + i;
} else {
fet_reply.data = NULL;
fet_reply.datalen = 0;
}
return 0;
too_short:
fprintf(stderr, "fet: too short (%d bytes)\n",
plen);
return -1;
}
static int recv_packet(void)
{
int plen = BUFFER_WORD(fet_buf, 0);
assert (fet_transport != NULL);
/* If there's a packet still here from last time, get rid of it */
if (fet_len >= plen + 2) {
memmove(fet_buf, fet_buf + plen + 2, fet_len - plen - 2);
fet_len -= plen + 2;
}
/* Keep adding data to the buffer until we have a complete packet */
for (;;) {
int len;
plen = BUFFER_WORD(fet_buf, 0);
if (fet_len >= plen + 2)
return parse_packet(plen);
len = fet_transport->recv(fet_buf + fet_len,
sizeof(fet_buf) - fet_len);
if (len < 0)
return -1;
fet_len += len;
}
return -1;
}
static int send_command(int command_code,
const u_int32_t *params, int nparams,
const u_int8_t *extra, int exlen)
{
u_int8_t datapkt[256];
int len = 0;
u_int8_t buf[512];
u_int16_t cksum;
int i = 0;
int j;
assert (len + exlen + 2 <= sizeof(datapkt));
assert (fet_transport != NULL);
/* Command code and packet type */
datapkt[len++] = command_code;
datapkt[len++] = ((nparams > 0) ? 1 : 0) + ((exlen > 0) ? 2 : 0) + 1;
/* Optional parameters */
if (nparams > 0) {
datapkt[len++] = nparams & 0xff;
datapkt[len++] = nparams >> 8;
for (j = 0; j < nparams; j++) {
u_int32_t p = params[j];
datapkt[len++] = p & 0xff;
p >>= 8;
datapkt[len++] = p & 0xff;
p >>= 8;
datapkt[len++] = p & 0xff;
p >>= 8;
datapkt[len++] = p & 0xff;
}
}
/* Extra data */
if (extra) {
int x = exlen;
datapkt[len++] = x & 0xff;
x >>= 8;
datapkt[len++] = x & 0xff;
x >>= 8;
datapkt[len++] = x & 0xff;
x >>= 8;
datapkt[len++] = x & 0xff;
memcpy(datapkt + len, extra, exlen);
len += exlen;
}
/* Checksum */
cksum = calc_checksum(datapkt, len);
datapkt[len++] = cksum & 0xff;
datapkt[len++] = cksum >> 8;
/* Copy into buf, escaping special characters and adding
* delimeters.
*/
buf[i++] = 0x7e;
for (j = 0; j < len; j++) {
char c = datapkt[j];
if (c == 0x7e || c == 0x7d) {
buf[i++] = 0x7d;
c ^= 0x20;
}
buf[i++] = c;
}
buf[i++] = 0x7e;
assert (i < sizeof(buf));
return fet_transport->send(buf, i);
}
static int xfer(int command_code, const u_int8_t *data, int datalen,
int nparams, ...)
{
u_int32_t params[MAX_PARAMS];
int i;
va_list ap;
assert (nparams <= MAX_PARAMS);
va_start(ap, nparams);
for (i = 0; i < nparams; i++)
params[i] = va_arg(ap, unsigned int);
va_end(ap);
if (data && fet_is_rf2500) {
assert (nparams + 1 <= MAX_PARAMS);
params[nparams++] = datalen;
if (send_rf2500_data(data, datalen) < 0)
return -1;
if (send_command(command_code, params, nparams, NULL, 0) < 0)
return -1;
} else if (send_command(command_code, params, nparams,
data, datalen) < 0)
return -1;
if (recv_packet() < 0)
return -1;
if (fet_reply.command_code != command_code) {
fprintf(stderr, "fet: reply type mismatch\n");
return -1;
}
return 0;
}
/**********************************************************************
* MSP430 high-level control functions
*/
static int fet_version;
static int do_identify(void)
{
char idtext[64];
if (fet_version < 20300000) {
if (xfer(C_IDENTIFY, NULL, 0, 2, 70, 0) < 0)
return -1;
if (!fet_reply.data) {
fprintf(stderr, "fet: missing info\n");
return -1;
}
memcpy(idtext, fet_reply.data + 4, 32);
idtext[32] = 0;
} else {
u_int16_t id;
if (xfer(0x28, NULL, 0, 2, 0, 0) < 0) {
fprintf(stderr, "fet: command 0x28 failed\n");
return -1;
}
if (fet_reply.datalen < 2) {
fprintf(stderr, "fet: missing info\n");
return -1;
}
id = (fet_reply.data[0] << 8) | fet_reply.data[1];
if (find_device_id(id, idtext, sizeof(idtext)) < 0) {
printf("Unknown device ID: 0x%04x\n", id);
return 0;
}
}
printf("Device: %s\n", idtext);
return 0;
}
static void fet_close(void)
{
if (xfer(C_RUN, NULL, 0, 2, FET_RUN_FREE, 1) < 0)
fprintf(stderr, "fet: failed to restart CPU\n");
if (xfer(C_CLOSE, NULL, 0, 1, 0) < 0)
fprintf(stderr, "fet: close command failed\n");
fet_transport->close();
fet_transport = NULL;
}
static int do_reset(void) {
if (xfer(C_RESET, NULL, 0, 3, FET_RESET_ALL, 0, 0) < 0) {
fprintf(stderr, "fet: reset failed\n");
return -1;
}
return 0;
}
static int do_run(int type)
{
if (xfer(C_RUN, NULL, 0, 2, type, 0) < 0) {
fprintf(stderr, "fet: failed to restart CPU\n");
return -1;
}
return 0;
}
static int do_halt(void)
{
if (xfer(C_STATE, NULL, 0, 1, 1) < 0) {
fprintf(stderr, "fet: failed to halt CPU\n");
return -1;
}
return 0;
}
static int do_erase(void)
{
if (xfer(C_RESET, NULL, 0, 3, FET_RESET_ALL, 0, 0) < 0) {
fprintf(stderr, "fet: reset before erase failed\n");
return -1;
}
if (xfer(C_CONFIGURE, NULL, 0, 2, 2, 0x26) < 0) {
fprintf(stderr, "fet: config (1) failed\n");
return -1;
}
if (xfer(C_CONFIGURE, NULL, 0, 2, 5, 0) < 0) {
fprintf(stderr, "fet: config (2) failed\n");
return -1;
}
if (xfer(C_ERASE, NULL, 0, 3, FET_ERASE_MAIN, 0x8000, 2) < 0) {
fprintf(stderr, "fet: erase command failed\n");
return -1;
}
return 0;
}
static device_status_t fet_wait(int blocking)
{
do {
/* Without this delay, breakpoints can get lost. */
if (usleep(500000) < 0)
return DEVICE_STATUS_INTR;
if (xfer(C_STATE, NULL, 0, 1, 0) < 0) {
fprintf(stderr, "fet: polling failed\n");
return DEVICE_STATUS_ERROR;
}
if (!(fet_reply.argv[0] & FET_POLL_RUNNING))
return DEVICE_STATUS_HALTED;
} while (blocking);
return DEVICE_STATUS_RUNNING;
}
static int fet_control(device_ctl_t action)
{
switch (action) {
case DEVICE_CTL_RESET:
return do_reset();
case DEVICE_CTL_RUN:
return do_run(FET_RUN_FREE);
case DEVICE_CTL_RUN_BP:
return do_run(FET_RUN_BREAKPOINT);
case DEVICE_CTL_HALT:
return do_halt();
case DEVICE_CTL_STEP:
if (do_run(FET_RUN_STEP) < 0)
return -1;
if (fet_wait(1) < 0)
return -1;
return 0;
case DEVICE_CTL_ERASE:
return do_erase();
}
return 0;
}
static int fet_breakpoint(u_int16_t addr)
{
if (xfer(C_BREAKPOINT, NULL, 0, 2, 0, addr) < 0) {
fprintf(stderr, "fet: set breakpoint failed\n");
return -1;
}
return 0;
}
static int fet_getregs(u_int16_t *regs)
{
int i;
if (xfer(C_READREGISTERS, NULL, 0, 0) < 0)
return -1;
if (fet_reply.datalen < DEVICE_NUM_REGS * 4) {
fprintf(stderr, "fet: short reply (%d bytes)\n",
fet_reply.datalen);
return -1;
}
for (i = 0; i < DEVICE_NUM_REGS; i++)
regs[i] = BUFFER_WORD(fet_reply.data, i * 4);
return 0;
}
static int fet_setregs(const u_int16_t *regs)
{
u_int8_t buf[DEVICE_NUM_REGS * 4];;
int i;
int ret;
memset(buf, 0, sizeof(buf));
for (i = 0; i < DEVICE_NUM_REGS; i++) {
buf[i * 4] = regs[i] & 0xff;
buf[i * 4 + 1] = regs[i] >> 8;
}
ret = xfer(C_WRITEREGISTERS, buf, sizeof(buf), 1, 0xffff);
if (ret < 0) {
fprintf(stderr, "fet: context set failed\n");
return -1;
}
return 0;
}
int fet_readmem(u_int16_t addr, u_int8_t *buffer, int count)
{
while (count) {
int plen = count > 128 ? 128 : count;
if (xfer(C_READMEMORY, NULL, 0, 2, addr, plen) < 0) {
fprintf(stderr, "fet: failed to read "
"from 0x%04x\n", addr);
return -1;
}
if (fet_reply.datalen < plen) {
fprintf(stderr, "fet: short data: "
"%d bytes\n", fet_reply.datalen);
return -1;
}
memcpy(buffer, fet_reply.data, plen);
buffer += plen;
count -= plen;
addr += plen;
}
return 0;
}
int fet_writemem(u_int16_t addr, const u_int8_t *buffer, int count)
{
while (count) {
int plen = count > 128 ? 128 : count;
int ret;
ret = xfer(C_WRITEMEMORY, buffer, plen, 1, addr);
if (ret < 0) {
fprintf(stderr, "fet: failed to write to 0x%04x\n",
addr);
return -1;
}
buffer += plen;
count -= plen;
addr += plen;
}
return 0;
}
const static struct device fet_device = {
.close = fet_close,
.control = fet_control,
.wait = fet_wait,
.breakpoint = fet_breakpoint,
.getregs = fet_getregs,
.setregs = fet_setregs,
.readmem = fet_readmem,
.writemem = fet_writemem
};
static const u_int8_t rf2500_29_magic[] = {
0x00, 0x80, 0xff, 0xff, 0x00, 0x00, 0x00, 0x10,
0xff, 0x10, 0x40, 0x00, 0x00, 0x02, 0xff, 0x05,
0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x00,
0x01, 0x00, 0xd7, 0x60, 0x00, 0x00, 0x00, 0x00,
0x08, 0x07, 0x10, 0x0e, 0xc4, 0x09, 0x70, 0x17,
0x58, 0x1b, 0x01, 0x00, 0x03, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x33, 0x0f, 0x1f, 0x0f,
0xff, 0xff
};
static const u_int8_t chronos_2b_magic[] = {
0x00, 0x10, 0xff, 0x17, 0x00, 0x02, 0x01, 0x00,
0x04, 0x00, 0x40, 0x00, 0x0a, 0x91, 0x8e, 0x00,
0x00, 0xb0, 0x28, 0x29, 0x2a, 0x2b, 0x80, 0xd8,
0xa8, 0x60, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00
};
static const u_int8_t chronos_29_magic[] = {
0x00, 0x80, 0xff, 0xff, 0x00, 0x00, 0x00, 0x18,
0xff, 0x19, 0x80, 0x00, 0x00, 0x1c, 0xff, 0x2b,
0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x02, 0x00,
0x02, 0x00, 0x07, 0x24, 0x00, 0x00, 0x00, 0x00,
0x08, 0x07, 0x10, 0x0e, 0xc4, 0x09, 0x70, 0x17,
0x58, 0x1b, 0x01, 0x00, 0x03, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x00,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff
};
static int do_magic(void)
{
if (fet_version >= 30001000) {
printf("Sending Chronos init messages...\n");
if (xfer(0x2b, chronos_2b_magic,
sizeof(chronos_2b_magic), 0) < 0) {
fprintf(stderr, "fet: command 0x2b failed\n");
return -1;
}
if (xfer(0x29, chronos_29_magic,
sizeof(chronos_29_magic), 3, 0x77, 0x6f, 0x4a) < 0) {
fprintf(stderr, "fet: command 0x29 failed\n");
return -1;
}
} else if (fet_version >= 30000000) {
printf("Sending RF2500 init messages...\n");
if (xfer(0x29, rf2500_29_magic,
sizeof(rf2500_29_magic), 3, 0, 0x39, 0x31) < 0) {
fprintf(stderr, "fet: command 0x29 failed\n");
return -1;
}
}
return 0;
}
const struct device *fet_open(const struct fet_transport *tr,
int proto_flags, int vcc_mv)
{
fet_transport = tr;
fet_is_rf2500 = proto_flags & FET_PROTO_RF2500;
init_codes();
if (xfer(C_INITIALIZE, NULL, 0, 0) < 0) {
fprintf(stderr, "fet: open failed\n");
return NULL;
}
fet_version = fet_reply.argv[0];
printf("FET protocol version is %d\n", fet_version);
if (xfer(0x27, NULL, 0, 1, 4) < 0) {
fprintf(stderr, "fet: init failed\n");
return NULL;
}
/* configure: Spy-Bi-Wire or JTAG */
if (xfer(C_CONFIGURE, NULL, 0,
2, 8, (proto_flags & FET_PROTO_SPYBIWIRE) ? 1 : 0) < 0) {
fprintf(stderr, "fet: configure failed\n");
return NULL;
}
printf("Configured for %s\n",
(proto_flags & FET_PROTO_SPYBIWIRE) ? "Spy-Bi-Wire" : "JTAG");
/* set VCC */
if (xfer(C_VCC, NULL, 0, 1, vcc_mv) < 0) {
fprintf(stderr, "fet: set VCC failed\n");
return NULL;
}
printf("Set Vcc: %d mV\n", vcc_mv);
/* Identify the chip */
if (do_identify() < 0) {
fprintf(stderr, "fet: identify failed\n");
return NULL;
}
/* Send the magic required by RF2500 and Chronos FETs */
if (do_magic() < 0) {
fprintf(stderr, "fet: init magic failed\n");
return NULL;
}
return &fet_device;
}