'i' was iterating in steps of unitsize. However, the destination array
was also indexed with it, but it is of u8 type. Let 'i' run bytewise and
only multiply with unitsize when we need it.
This fixes parts of bug #844.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
'j' is the loop variable for channels, not 'i'.
This fixes parts of bug #844.
Reported-by: Maxim Sloyko <m.sloyko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
src/output/csv.c: In function 'dump_saved_values':
src/output/csv.c:461:6: warning: format '%lu' expects argument of
type 'long unsigned int', but argument 3 has type 'uint64_t' [-Wformat=]
ctx->sample_time, ctx->value);
^
I've seen the following output from sigrok-cli:
CH1: 478.720 mV
CH1: -514 mV
CH1: -0 V
I added some debug, and it seems like the digits value isn't reset
to the actual value after calling sr_analog_si_prefix_friendly():
using 6 digits
value2 0.478720 digits 6
value2 -0.513536 digits 3
value2 -0.487424 digits 0
This commit fixes this by resetting the value to the actual value before.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Since tastes and requirements might differ, introduce support for a
user specified character set in the construction of ASCII art graphs
of signal levels. The syntax is "charset=<low><high>[<fall><rise>]",
the default remains backwards compatible with existing consumers.
In comparison to assuming a fixed character set, this change addresses
several distinct aspects:
Users can adjust the output for "higher visual contrast", or "straight
lines" instead of dotted patterns, or "increased difference in height"
for low and high signal levels, or "filled" (block like, "wall of text")
appearance of periods with high levels. User adjustable characters are
needed, as no single fixed set can satisfy the differing expectations.
Perception of the output heavily depends on specific terminals and fonts
in use.
Then there is the issue of levels versus edges, and how their timing
relates. By default edges are drawn at a point in time where the signal
was sampled and was deteremined to already _have_ changed and have
settled to the new level, which means that the position of edges in the
resulting graph might be off by up to one sample period. Strictly
speaking, the available set of samples only contains levels, and does
not hint where exactly an edge might have occured. Though this might be
considered rather nitpicky, representing the graph without edges does
better reflect the input data, and might simplify postprocessing.
Compare the previously only supported format (still the default, -O ascii):
1:...................................................../""""""""""""""""""""
1:""""""""""""""""""""""""""""""""\.........................................
1:..........................................................................
to those example alternatives:
$ sigrok-cli -i file.sr -O ascii:charset=_\"\\/
1:_____________________________________________________/""""""""""""""""""""
1:""""""""""""""""""""""""""""""""\_________________________________________
1:__________________________________________________________________________
$ sigrok-cli -i file.sr -O ascii:charset=_\"
1:_____________________________________________________"""""""""""""""""""""
1:""""""""""""""""""""""""""""""""__________________________________________
1:__________________________________________________________________________
$ sigrok-cli -i file.sr -O ascii:charset=_^
1:_____________________________________________________^^^^^^^^^^^^^^^^^^^^^
1:^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^__________________________________________
1:__________________________________________________________________________
$ sigrok-cli -i file.sr -O ascii:charset=_M
1:_____________________________________________________MMMMMMMMMMMMMMMMMMMMM
1:MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM__________________________________________
1:__________________________________________________________________________
$ sigrok-cli -i file.sr -O ascii:charset=_X
1:_____________________________________________________XXXXXXXXXXXXXXXXXXXXX
1:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX__________________________________________
1:__________________________________________________________________________
Signed-off-by: Gerhard Sittig <gerhard.sittig@gmx.net>
This change tweaks the CSV output module to change the label
setting from on/off to units/channels/off, where channels is the old
on behavior, and units uses the meaning field to generate the column
label - except for the generated Time column, which uses the label from
the X axis when it's generating gnuplot output.
- It now handles more than one analog value correctly - at least from the
demo driver.
- Add column headers from channel names.
- Add a row dedup capability.
- Add a sample time column.
- Add a frame end formatting (for gnuplot).
- Made almost all formatting controllable or at least optional.
- Fix it so we can mix analog and digital values.
- Add outputting a gnuplot script for the data.
- Count actual channels, not just mine, to find end of sample.
- Add trigger option (untested).
When a meter display 105.2 kΩ, libsigrok will return 105200 Ω
but it is really valuable to know that the last 2 digits are not
significant, so encoding.digits should be set to -2.
This would allow a sigrok client to display 105200 as 105.2 k
instead of 105.200 k.
These functions were only used in the SR_DF_ANALOG_OLD case,
whereas the SR_DF_ANALOG case already used functions and lists
from src/analog.c.
This closes bug #636.
zip_append_analog() does not free most of the memory it allocates. Address
this by moving all sanity checks that do not rely on anything else at the
beginning of the function before any allocations are done. And then make
sure to properly free all allocated memory on all paths leaving the
function.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
0 is a valid index for a channel. Using it as the value for the terminating
entry of analog_index_map causes zip_append_analog() to falsely assume that
no channel was found when a packet for a channel with index 0 was received.
This prevents the data for the channel to be added to the sigrok session
file.
Instead use -1, which is not a valid channel index, as
the terminating entry value.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
On the high-end bench multimeters, resistance can be measured with a
kelvin connection as well as the more common two wire method. Provide
a flag which can indicate if four-wire mode is used.
- Don't set capturefile if no logic channels are saved
- Don't set total probes if no logic channels are saved
- Save analog channels without index gaps (e.g. probe1/probe4)
==18779== 800,000 bytes in 196 blocks are definitely lost in loss record 29 of 29
==18779== at 0x4C29110: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==18779== by 0x4E635C3: receive (analog.c:319)
==18779== by 0x40870B: datafeed_in (session.c:316)
==18779== by 0x4E59D4E: sr_session_send (session.c:1201)
==18779== by 0x4E59F8B: sr_session_send (session.c:1159)
==18779== by 0x4E62595: send_chunk (wav.c:234)
==18779== by 0x4E62A06: process_buffer (wav.c:290)
==18779== by 0x40954A: load_input_file_module (input.c:123)
==18779== by 0x4097AB: load_input_file (input.c:157)
==18779== by 0x40531E: main (main.c:288)
Use in-memory buffers instead of temporary files. This avoids
the need for low-level I/O on the FD returned by g_mkstemp().
Refactor the code accordingly. Also plug a number of leaks and
tighten the error checking.
This fixes parts of bug #423.
The list of fixed warnings:
src/output/srzip.c:285:3: warning: Value stored to 'ret' is never read
ret = zip_append(o, logic->data, logic->unitsize, logic->length);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/scpi/scpi.c:610:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/scpi/scpi.c:667:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/dmm/vc870.c:410:2: warning: Value stored to 'info_local' is never read
info_local = (struct vc870_info *)info;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/conrad-digi-35-cpu/api.c:130:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/fx2lafw/api.c:658:2: warning: Value stored to 'timeout' is never read
timeout = fx2lafw_get_timeout(devc);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~
src/hardware/gmc-mh-1x-2x/protocol.c:941:3: warning: Value stored to 'retc' is never read
retc = SR_ERR_ARG;
^ ~~~~~~~~~~
src/hardware/gmc-mh-1x-2x/api.c:168:2: warning: Value stored to 'model' is never read
model = METRAHIT_NONE;
^ ~~~~~~~~~~~~~
src/hardware/ikalogic-scanalogic2/api.c:325:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/openbench-logic-sniffer/api.c:185:3: warning: Value stored to 'devc' is never read
devc = sdi->priv;
^ ~~~~~~~~~
src/hardware/rigol-ds/api.c:813:3: warning: Value stored to 'devc' is never read
devc = sdi->priv;
^ ~~~~~~~~~
src/hardware/scpi-pps/api.c:405:2: warning: Value stored to 'ret' is never read
ret = SR_OK;
^ ~~~~~
src/hardware/yokogawa-dlm/api.c:239:2: warning: Value stored to 'ret' is never read
ret = SR_ERR_NA;
^ ~~~~~~~~~
Since Autoconf places some important feature flags only into the
configuration header, it is necessary to include it globally to
guarantee a consistent build.
A few of these were pretty serious, like missing arguments,
passing integers where a string was expected, and so on.
In some places, change the types used by the code rather than
just the format strings.
Move the include flags for files in the source tree from
configure.ac to Makefile.am where they belong. Also use
AM_CPPFLAGS instead of CFLAGS/CXXFLAGS to make sure the
files in the build/source tree are always picked up first.
Also, remove the include/libsigrok sub-directory from the
search path, thereby making the <libsigrok/> prefix mandatory
when building libsigrok itself. This matches the convention
already imposed on users of the library.
Gnuplot doesn't have any "official" file name extension(s). It uses
(at least) two different types of files basically:
- "control files": These can have many different somewhat commonly
used extensions such as .gpi, .gnu, .gnuplot, .gp, .plt, .gih,
others. These files don't contain data, only Gnuplot commands such
as 'set yrange [75:105]', 'set ylabel "foo" offset 1', and so on.
- "data files": This is what libsigrok reads and writes. These files
contain actual data to be graphed by Gnuplot (with the help of a
specially-crafted control file, see above). The data is usually in
a tab-separated format. The common file extension is usually .dat,
though many others are possible as well.
- 'struct sr_input *' variables are consistently named 'in'.
- 'struct sr_input_module *' variables are consistently named 'imod'.
- 'struct sr_output *' variables are consistently named 'o'.
- 'struct sr_output_module *' variables are consistently named 'omod'.
Use g_malloc0() for small allocations and assume they always
succeed. Simplify error handling in a few places accordingly.
Don't always sanity-check parameters for non-public (SR_PRIV)
functions, we require the developers to invoke them correctly.
This allows further error handling simplifications.
This is a feature restricted to the new analog struct.
By default all the digits available in the encoding struct are printed.
The option "digits", when set to "spec", changes this to print the
number given in the spec struct.
The automatic selections of the measured quantity and equivalent circuit
model are more part of the configuration of the meter than attributes
of the measurement result. To reflect this, model them as config keys
instead of mqflags. This allows a driver that supports remote control to
implement 'set' method for them and has the additional benefit of saveing
two flag bits.
This returned an array of structs with an NULL-ed element at the end.
The drivers still do this, but the wrappers now make and free a NULL-
terminated array around it.
sr_output_options_free() now takes the pointer returned by
sr_output_options_get(), instead of the module owning it.
Output modules are now guaranteed:
- Every option is always given, with the default value if not supplied
by the user, and is the right GVariantType.
- No invalid options are ever passed.
Audio tools processing WAV failes generally need the samples to be in
the range -1 to +1. The scale option adds postprocessing to any samples
going into a WAV file, by dividing the sample values by the given factor.
Wolfram Sang
Uwe Hermann
Gerhard Sittig
Soeren Apel
Sven Schnelle
Aurelien Jacobs
Mike Meyer
Lars-Peter Clausen
Alexandru Gagniuc
Martin Ling
Stefan Brüns
Martin Ling
Daniel Elstner
Bert Vermeulen
Bartosz Golaszewski
Joel Holdsworth
Janne Huttunen
Marc Schink