2b691be806
serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
...
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).
However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
e84e0096db
Fix build
2013-07-16 17:18:20 +02:00
b979d0c9cb
kecheng-kc-330b: Code cleanup
2013-07-16 17:17:54 +02:00
d406dccd6a
lascar-el-usb: Don't close device after acquisition
2013-07-16 16:08:38 +02:00
85ed4ab3ba
kecheng-kc-330b: Acquisition from stored logs
2013-07-16 16:08:38 +02:00
f336618c3d
kecheng-kc-330b: Check device status before acquisition
...
Can't really count on it either way though, the device is just
too flaky to conclude whether it's going to work or not, regardless
of the status returned.
2013-07-16 16:08:38 +02:00
df03552894
kecheng-kc-330b: Live SPL acquisition
2013-07-16 16:08:38 +02:00
bc7be4a9f4
kecheng-kc-330b: Implement all SR_CONF options
2013-07-16 16:08:38 +02:00
a8806f032c
kecheng-kc-330b: Flesh out driver, add scan functionality
2013-07-16 16:08:38 +02:00
ed759a0835
kecheng-kc-330b: Initial driver skeleton.
2013-07-16 16:08:38 +02:00
ab4bb6eb7c
ikalogic-scanaplus: Initial driver implementation.
2013-07-16 01:01:11 +02:00
fdf4a1f5a0
ikalogic-scanaplus: Initial driver skeleton.
2013-07-15 12:20:53 +02:00
a7a163a795
Support for UNI-T UT60A/E multimeters via RS232 or USB
2013-07-09 22:57:55 +02:00
fb8d593cfe
Use GET_REPORT request for device to host transfer.
2013-07-05 14:01:06 +02:00
c134574938
uni-t-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
6045b91aa4
serial-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
cea26f6e9f
cem-dt-885x: Support for retrieving stored samples
2013-06-20 14:35:34 +02:00
662172d4f4
cem-dt-885x: Support for SR_CONF_DATA_SOURCE
...
This device can do both live and memory-based acquisition.
2013-06-19 12:23:30 +02:00
4c22355f04
cem-dt-885x: Support for powering off the device
2013-06-17 16:17:39 +02:00
f157b2eebb
cem-dt-885x: Support for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
0cd9107dfb
cem-dt-885x: Fix datalog on/off setting in max/min hold mode
...
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
2013-06-17 16:17:39 +02:00
a90e480cdc
cem-dt-885x: Support for max/min hold modes
2013-06-17 16:17:39 +02:00
1487ce4fbc
cem-dt-885x: Support for changing time weighting
2013-06-17 16:17:39 +02:00
be73391982
cem-dt-885x: Support for changing frequency weighting
2013-06-17 16:17:39 +02:00
e1af0e85b9
cem-dt-885x: Support for turning data logging on/off
2013-06-17 16:17:38 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
14cf708fef
cem-dt-885x: Send last measurement at normal rate in hold mode
...
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
2013-06-12 18:34:42 +02:00
bc1143280f
cem-dt-885x: Hold off measurements in max/min hold mode
2013-06-12 18:34:42 +02:00
e37c4b3959
cem-dt-885x: Live SPL acquisition
2013-06-12 18:34:42 +02:00
7fb8279c9b
cem-dt-885x: Flesh out driver, add scan functionality
2013-06-12 18:34:42 +02:00
8fa9368eb4
cem-dt-885x: Initial driver skeleton.
2013-06-12 18:34:42 +02:00
28083961fb
scanalogic2: Only print actual state changes in the log.
2013-06-11 18:39:55 +02:00
9526f2d4f8
scanalogic2: Replace %i with %s where needed.
2013-06-11 18:39:54 +02:00
79914b3a62
scanalogic2: Shorten a few function name prefixes.
...
The driver-private helper functions in protocol.c can have a shorter
prefix to make the code look nicer.
2013-06-11 18:39:54 +02:00
c824eb6323
scanalogic2: Cosmetics, whitespace, typos, etc.
2013-06-11 18:39:54 +02:00
e52e712d05
Initial driver for IKALOGIC Scanalogic-2
2013-06-11 18:39:54 +02:00
16e76baec9
ikalogic-scanalogic2: Initial driver skeleton.
2013-06-11 18:39:54 +02:00
eea49cf10d
ols/link-mso19: Consistency fixes.
...
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
2013-06-02 17:03:40 +02:00
1c2d542df2
demo: Use std_dev_clear().
2013-06-02 16:57:07 +02:00
3b412e3a30
s/clear_instances/dev_clear/.
...
Consistently use the same name for the dev_clear() API callback
everywhere.
2013-06-02 16:56:41 +02:00
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
3678cf73fe
asix-sigma: Use std_dev_clear().
2013-06-02 16:46:18 +02:00
c43cf4d40e
alsa: Use std_dev_clear().
2013-06-02 16:46:17 +02:00
fa85f37630
rigol-ds1xx2: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
dec6c583a2
hantek-dso: Simplify cleanup().
2013-06-02 13:52:40 +02:00
658636f1c9
nexus-osciprime: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
c9d622a420
lascar-el-usb: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
771bd216fa
fluke-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
732899f8cf
colead-slm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
676c28a846
agilent-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
Uwe Hermann
Bert Vermeulen
Florian Knodt
Marc Schink
Florian Steinhardt