Also use "r" and "f" as trigger slope values for now, since that's
what most other drivers do currently.
This also fixes two scan-build issues:
api.c:559:3: warning: Value stored to 'tmp_str' is never read
tmp_str = g_variant_get_string(data, NULL);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
api.c:561:9: warning: Use of memory after it is freed
ret = siglent_sds_config_set(sdi, "%s:TRSL %s",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The strcasestr() function is non-portable (e.g. not available on
MinGW, possibly elsewhere). Replace it with g_strstr_len() for the time
being. While the latter is not case-insensitive it appears that
that property doesn't matter here ("." should not be relevant anyway,
and e.g. an SDS1202X-E does indeed report "Mpts" as such).
Should it become necessary to have this code be case-insensitive,
we'll have to find a more portable solution than strcasestr().
This causes some compile errors on platforms where RPC is not available, e.g.
siglent-sds/api.c:25:21: fatal error: rpc/rpc.h: No such file or directory
Surrounding the #include (and later code) with "#if HAVE_RPC" should avoid
these compile errors, but since it's not used at all for now, drop it.
Make the USB reset for USB TMC devices conditional. Check a whitelist,
which in this implementation exclusively contains the Siglent VID.
The whitelist's comment may need adjustment. The VID probably not only
applies to SDS devices, but could be used for SDG and others as well.
And lsusb output suggests the VID is used by Atten, too.
Add the Siglent's VID to a list of blacklisted USB TMC devices.
Unconditionally reset USB devices in the open routine.
This was taken from marchel's development for Siglent SDS. Though the
reset should probably be conditional, and only get applied to devices
which are known to need it.
The comment may need adjustment, maybe individual PID entries are
required. The VID probably not only applies to SDS devices, but could
be used for SDG and other gear as well. And lsusb output suggests the
VID is used by Atten, too.
Implement a first version of the driver for the Siglent SDS1000 and
SDS2000 oscilloscopes.
[ gsi: This commit corresponds to git 0228126017e6 of marchelh's tree,
I adjusted the source to closer match the project's coding style. The
conversion was verified by this command:
$ git diff --word-diff=color -w -b <branch>:<dir> <branch>:<dir>
Changes include: Whitespace adjustment, dead code removal, separation
of variable declaration and assignment, alpha-sorted includes. Line
length was not addressed and not every location got adjusted, to keep
the diff minimal and to reduce effort during review of this version. ]
The conn= specification is not strictly related to RS232 communication.
Provide examples for other USB specs (as they are used for some DMM and
LCR drivers), as well as TCP and VXI (which are often found with MSO
drivers).
Check for successful allocation before accessing struct members. Return
with an error from device initialization when allocation fails.
This was reported by clang's scan-build.
Make sure to release the allocated "pod enabled" memory, too, when SCPI
communication during channel setup fails. Defer the return with an error
(instead of duplicating the free() invocation).
This was reported by clang's scan-build.
The compiler marks a potential use after free, which the current
implementation won't trigger. The error only occurs when a sigrok
channel is neither logic nor analog.
Address the issue nevertheless, to silence the compiler warning, and to
protect against possible programming errors when a future implementation
should support more channel types.
This was reported by clang's scan-build.
Fixup unbalanced braces for more complex if statements, to better
reflect the project's official coding style.
Adjust data types in the float_to_le() routine. A float value gets
copied to a buffer of bytes (uint8_t). Don't use 'char' on the other
side of assignments, to not assume a specific width for char, and to
avoid potential signedness issues. Copy from bytes to bytes instead.
The WAV output module supports an optional 'scale' factor, in its
absence the samples will pass unmodified. The builtin help text is
unexpected, and reads:
$ sigrok-cli -O wav --show
...
Options:
scale: Scale values by factor (default 0.0)
Setup a default scale factor of 1.0, which results in identical
behaviour and better reflects what is happening.
The previous implementation only emitted data for the first enabled
channels, and "saw no changes" after emission of the initial value for
channels on positions that followed a disabled channel.
Assume that the received data from the session bus communicates the bits
of enabled channels in a packed representation. Skip the mapping of
output bit indices to sigrok channel numbers.
This fixes the remaining part of bug #519.
Tested by inspecting in gtkwave the result of command:
$ sigrok-cli -d demo -C D1,D3,D6 -c samplerate=2M --samples 2500 -O vcd -o trace.vcd
When we find that all input sources (device drivers, and input modules)
provide a dense bit field, all of the mapping logic can get removed
here. This commit just quickly disables the logic.
Identifiers for channels in the VCD header section could be "sparse"
when sigrok channels were disabled. Make sure to not assign names to
disabled channels. This will e.g. assign !, ", and # to channels D1, D3,
and D6, when D0, D2, D4-D5, and D7 are disabled.
This addresses part of bug #519.
Few DMM drivers already did it. This commit adjusts the remaining DMM
drivers, to set the "DC" flag for measurements in diode mode.
This fixes bug #144.
Although I don't have the hardware to test, the nature of the change and
the arrangement of driver code suggests it's good. When a meter already
communicated the "DC" status, the change does nothing and won't harm.
The change ensures "DC" is flagged for those meters which previously
didn't, which is desirable.
Some SCPI based drivers fail to convert response data, because strutil
conversion helpers sr_atol() and sr_atof() don't like trailing spaces
after the number's text that successfully got converted.
It's yet to get determined whether all call sites of the conversion
routines like their eating adjacent whitespace. But given that the
conversion routine explicitly checks for end of the string after the
number, no call site should expect or even depend on trailing text to
keep its whitespace.
See bug #788 for a discussion and example data.
Synchronize sr_parse_sizestring() with sr_si_string_u64() capabilities.
Add support for the T/P/E suffixes. Since this conversion helper deals
with integer values exclusively, there is no issue with case insensitive
matches. The value cannot be pico. Neither is there an ambiguity with
the 10e6 notation.
This addresses bug #763.
Fix a style nit while we are here. Put braces around both arms of a
complex conditional.
Explicitly assign NULL to param to avoid the "may be used uninitialized"
warning reported in bug #1094. Behaviour remains unchanged. All references
to the variable were under "if (!conn)", and the assigning arm of the
branch checked for "if (!param)" after assignment. So the error could
not happen, but compilers may not have noticed depending on the width of
their scope during compilation.
Move the initialization of 'conn' closer to the conditional assignment,
such that all paths are seen in one spot during maintenance.
This fixes bug #1094.
Although log messages are terminated by a line feed, output still might
get buffered when the program does not talk to a terminal (that it is
aware of). Add an fflush(3) call to the printf(3) sequence such that log
output will immediately show up when writing to pipes or sockets, too.
Early sr_init() steps can just 'return' fine. After allocation of the
'context' memory, make all error paths 'goto done' before returning,
to undo the memory allocation.
The srzip output module dropped support for the "filename" option in
commit 37875f7506 on 2015-07-30, but still used to assign to slot
options[0] which clobbers the array's sentinel. Remove those accesses
to the non-existing option.
api.c: In function 'config_set':
api.c:352:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'uint64_t' [-Wformat=]
sr_err("invalid sample range 2k...64M: %ld",
^
beaglelogic_tcp.c: In function 'beaglelogic_tcp_send_cmd':
beaglelogic_tcp.c:114:3: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Wformat=]
sr_dbg("Only sent %d/%lu bytes of command: '%s'.", out,
^
Check pointers' validity before dereferencing them. Release partially
allocated memory in an error path. Remove an assignment which never took
effect.
This was reported by clang's scan-build.
Each code path either assigns to 'flags', or leaves the routine. There
is no potential path that leaves the variable at the initially assigned
value, so the assignment took no effect. Remove it.
Nit: Trim the source code line length while we are here.
This was reported by clang's scan-build.
Check pointers' validity before dereferencing them. Explicitly assign a
default value to variables, before conversion routines conditionally
assign the "real" value (and don't in case of conversion errors). This
avoids processing "garbage" data.
Strictly speaking I cannot see how the conversion routine returns OK and
has _not_ assigned a result. But the explicit assignment won't harm
either, and matches the fallback when the conversion fails (detectibly).
Which means that runtime behaviour won't change.
This was reported by clang's scan-build.
Uwe Hermann
Gerhard Sittig
mhooijboer
Frank Stettner