3b95bd9152
scpi: Fix incomplete data issue for e.g. Hameg HMO1024.
...
On a Hameg HMO1024 you get incomplete data because the USB transfer takes
longer than the scpi->read_timeout_ms of 1 second that is defined in
scpi_dev_inst_new(). Therefore reset the timeout in sr_scpi_get_string()
whenever the device sends a partial response.
2015-01-11 01:43:13 +01:00
f62f595bfc
hameg-hmo: Fix double-free issue.
2015-01-11 01:43:12 +01:00
a1b61e6e04
hameg-hmo: Set SR_CONF_GET | SR_CONF_SET for frame limit.
...
Reading analog data from an HMO1024 (Firmware 04.527) failed because the
frame limit could not be set.
2015-01-11 01:43:12 +01:00
787ec9dbd9
Limit frames instead of samples.
...
Since every individual measurement is represented by a single frame
and a "sample" isn't all that meaningful concept in this context,
it makes more sense to define possible limit in number of frames.
Make the es51919 driver to support setting a frame limit instead of
a sample limit.
2015-01-06 20:10:17 +01:00
a6413fa58e
Use frames to group a single measurement result together.
...
In most, but not all, modes the ES51919 reports two separate
analog values for each measurement sample. These values are
mapped to two separate channels and sent in two separate
packets.
A client program needs a way to determine which results are
parts of the same measurement and also know when a complete
measurement is received so it can process the sample. Use
the frame begin and end packets to separate groups that each
represent a single complete measurement.
2015-01-06 20:10:17 +01:00
bb983c666a
Fix the channel indexes of the es51919 driver.
...
Set the channel indexes to unique values instead of setting
them all zero.
2015-01-06 20:10:17 +01:00
15eea61a47
Fix compile error on FreeBSD
2015-01-05 22:16:48 +01:00
b1a7ca3b60
serial.c: Cosmetics/consistency/documentation fixes.
2015-01-03 18:03:50 +01:00
24287ea9e3
Add a public API to list available serial ports.
2015-01-03 17:51:51 +01:00
5e1b68c6e7
Only save enabled channels to a session file.
...
This reverts bc96d5f08f#410 and #495 .
2014-12-05 01:14:22 +01:00
a160a0c344
session_file: Enable only the probes that are actually listed in metadata.
...
This is a better fix for #410 and #495 .
2014-12-05 01:14:22 +01:00
974fb0fffa
saleae-logic16: Show libusb transfer status name instead of code.
2014-11-28 00:21:56 +01:00
a11e10ec91
saleae-logic16: Change two errors into warnings.
...
Related to #466 , convert two more sanity checks from errors into warnings.
This may allow more devices to work with libsigrok.
2014-11-27 23:22:05 +01:00
5cfcab6603
saleae-logic16: Clearer error message.
2014-11-27 01:01:13 +01:00
e743a47d6d
beaglelogic: Add SR_CONF_CAPTURE_RATIO support.
2014-11-25 22:13:36 +01:00
5a971f66a3
saleae-logic16: Add SR_CONF_CAPTURE_RATIO support.
2014-11-25 22:13:36 +01:00
7bfcb25cf1
fx2lafw: Add SR_CONF_CAPTURE_RATIO support.
2014-11-25 16:56:34 +01:00
fe5a735553
soft-trigger: Add support for pre-triggering.
2014-11-25 16:56:34 +01:00
bc96d5f08f
Always save all channels to a session file.
...
This works around limitations of the current API that screw up saving
only enabled channels. See bug 410. And bug 495.
2014-11-24 02:21:52 +01:00
9f42e2e6be
sr_session_trigger_{get,set}: Document, add error checks.
2014-11-24 00:50:11 +01:00
b6085eb179
manson-hcs-3xxx: Fix incorrect SR_CONF_SCAN_OPTIONS handling.
...
The SR_CONF_SCAN_OPTIONS key must be listable with or without sdi,
otherwise the device will not be detected by frontends.
2014-11-23 21:13:16 +01:00
2f004b4bc1
usb_get_port_path(): fix libusb error checking
...
When libusb cannot access a device, libusb_get_port_numbers() will return
an error. Check the return code rather than doing invalid pointer
operations (out-of-bound read).
Avoid segfaults at sigrok-cli startup on my setup where some USB devices are
not accessible and also make Valgrind happier.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2014-11-23 17:58:21 +01:00
68ac991dba
Publish config key capabilities on session driver.
2014-11-23 17:48:29 +01:00
90cefe0cc7
Add sr_rational_set() convenience function.
2014-11-23 17:48:29 +01:00
cd3c4df35a
saleae-logic16: Downgrade error during capture to a message.
...
Some clone doesn't set this to the exact same value, and both bits in 0x48 are
marked as unknown at
http://sigrok.org/wiki/Saleae_Logic16/Firmware#FPGA_variables
This fixes bug #466 .
2014-11-23 13:47:45 +01:00
cc8be68f22
trigger: Add some more error handling.
...
All of these error conditions are checked via the unit tests.
Also, add the following missing entries (analog trigger types):
- SR_TRIGGER_RISING
- SR_TRIGGER_EDGE
2014-11-22 21:03:39 +01:00
a445f8aa08
trigger: Add API documentation.
2014-11-22 19:32:28 +01:00
54ab1dcdc4
Add missing entries to sr_config_info_data[].
...
Newly added keys:
- SR_CONF_SAMPLE_INTERVAL
- SR_CONF_NUM_TIMEBASE
- SR_CONF_NUM_VDIV
- SR_CONF_CENTER_FREQUENCY
- SR_CONF_DEVICE_MODE
- SR_CONF_SCAN_OPTIONS
- SR_CONF_DEVICE_OPTIONS
- SR_CONF_DEVICE_MODE
- SR_CONF_TEST_MODE
Also, keep the same ordering and grouping as in libsigrok.h.
2014-11-22 17:02:57 +01:00
91219afc75
Use g_malloc0() consistently, simplify error handling.
...
Use g_malloc0() for small allocations and assume they always
succeed. Simplify error handling in a few places accordingly.
Don't always sanity-check parameters for non-public (SR_PRIV)
functions, we require the developers to invoke them correctly.
This allows further error handling simplifications.
2014-11-22 17:02:57 +01:00
c368e6f3d2
Don't check sr_channel_new() return value (always succeeds).
...
We now use g_malloc0() for the allocation and assume the allocation
will always succeed, thus sr_channel_new() will always return a
valid new channel.
2014-11-21 12:10:05 +01:00
f57d8ffe66
Consistently use g_malloc0() for allocating devc.
...
We assume the allocation will always succeed, hence no need for
checking the returned value.
2014-11-21 12:09:01 +01:00
aac29cc192
Eliminate sr_dev_inst_new().
2014-11-21 02:01:36 +01:00
a9b2283fd0
Fix invalid pointer dereference.
2014-11-20 03:08:55 +01:00
cf0280fa1b
yokogawa-dlm: Publish driver options.
2014-11-19 23:54:01 +01:00
413f1944d1
motech-lps-30x: Publish driver options.
2014-11-19 23:53:35 +01:00
f3ba3c119c
manson-hcs-3xxx: Publish driver options.
2014-11-19 23:53:10 +01:00
6ec3ef9b92
hameg-hmo: Publish driver options.
2014-11-19 23:52:51 +01:00
8a58419d37
Finish fixing broken sr_config_list() logic.
2014-11-19 17:34:19 +01:00
a24da9a813
Make sr_analog_*_to_string() functions allocate the necessary buffers.
2014-11-19 17:34:19 +01:00
e07edc83d6
mic-985xx: Correctly report SR_CONF_THERMOMETER/_HYGROMETER.
...
Some models only log temperature, others log temperature and humidity
(so they need different drvopts).
2014-11-18 23:43:38 +01:00
20a7cd07c9
mic-985xx: Drop unneeded #define.
2014-11-18 23:26:10 +01:00
d6e1e6c4e1
mic-985xx: Publish driver options.
2014-11-18 23:26:10 +01:00
489c338884
center-3xx: Drop unneeded #define.
2014-11-18 23:20:09 +01:00
6685e9a6b3
center-3xx: Publish driver options.
2014-11-18 23:20:09 +01:00
5c868fef43
Revert "victor-dmm: Set spec digits to 3, matching the display."
...
This reverts commit 28b4243493
2014-11-18 18:10:19 +01:00
63ea6141b6
ols: Publish driver options.
2014-11-18 17:41:36 +01:00
f9dada0b60
agilent-dmm: Now really fix driver options.
2014-11-18 17:31:58 +01:00
42a47a9a4b
appa-55ii: Publish driver options.
2014-11-18 16:50:47 +01:00
5ecd9049e5
hantek-dso: Fix driver options.
2014-11-18 16:46:39 +01:00
1f889afd61
atten-pps3xxx: Fix driver options.
2014-11-18 16:44:58 +01:00
Mathias Katzer
Janne Huttunen
Uffe Jakobsen
Uwe Hermann
Aurelien Jacobs
Bert Vermeulen
Vincent Palatin
Tim Hatch
Martin Ling