3f0513bac1
serial-dmm: Use std_dev_clear().
2013-05-10 18:53:42 +02:00
9790079961
chronovu-la8: Use std_dev_clear().
2013-05-10 18:40:13 +02:00
decfe89d4e
Drop some lines that are no longer needed.
2013-05-10 18:30:32 +02:00
0bdb4f2e4a
tondaj-sl-814: Use std_dev_clear().
2013-05-10 17:56:53 +02:00
25e7adada7
mic-985xx: Use std_dev_clear().
2013-05-10 17:54:53 +02:00
2a052cc4d6
Use consistent naming for internal libtool helper libs.
...
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
9e165e742f
Use consistent HW_ name prefixes everywhere.
...
Older drivers used LA_* previously, we now use HW_* everywhere though.
2013-05-10 17:18:42 +02:00
576ff5b0ba
device.c: Add missing @since markers.
...
Also, add Doxygen comments for functions which don't have any yet.
2013-05-08 16:52:49 +02:00
01169de391
Doxyfile: Set version to "unreleased development snapshot".
2013-05-08 16:41:18 +02:00
7ab89f4827
Re-enable link-mso19 and nexus-osciprime drivers.
2013-05-08 16:40:45 +02:00
9dc7a75e3d
fx2lafw: Fix memory leak
2013-05-06 20:44:26 +02:00
03f4de8cf2
ols: Code cleanup
...
This also fixes a memory leak.
2013-05-06 00:42:18 +02:00
a006798b99
Fix various memory leaks
2013-05-06 00:40:17 +02:00
12a33563b9
std: Fix memory leak, code cleanup
2013-05-06 00:37:29 +02:00
26aec7fdc4
Drop link-mso19/nexus-osciprime in preparation for release.
...
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
2013-05-04 15:59:40 +02:00
a4fdbbe1c2
Doxyfile: Set version number to 0.2.0.
2013-05-04 15:55:11 +02:00
7c3e7b4306
udev rules file: Add entry for the ZEROPLUS LAP-16128U.
2013-05-04 15:22:45 +02:00
048e8babf7
NEWS: Minor update.
2013-05-04 15:17:50 +02:00
6941f84568
Fix libsigrok lib version (current:revision:age).
...
The last release (libsigrok 0.1.1) had a lib version of 0:0:0.
This release thus gets 1:0:0 according to the libtool manual guidelines.
2013-05-04 15:12:20 +02:00
c5ffac4148
uni-t-dmm: Add missing SR_CONF_LIMIT_MSEC support.
2013-05-04 00:13:25 +02:00
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
06c45a66f7
Minor whitespace fixes.
2013-05-03 14:03:49 +02:00
e6b2b4df9d
README.devices: Document how to make some DMMs log.
2013-05-03 13:31:02 +02:00
456dfd9f70
NEWS: Various updates and minor fixes.
2013-05-03 13:31:02 +02:00
a0c7e23ad8
Fix the build when libusb is not available.
...
Thanks Simon Richter <Simon.Richter@hogyros.de> for reporting.
2013-05-03 13:29:49 +02:00
3a277f3b2b
Deal with uninitialized drivers
2013-05-01 23:30:37 +02:00
c2fa697afa
serial-dmm: Add Tecpel DMM-8060 support.
2013-05-01 03:16:47 +02:00
b38e08fbb7
serial-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:13:43 +02:00
4554314c4f
uni-t-dmm: Add Tecpel DMM-8060 support.
...
This is _very_ likely to be a rebadged Voltcraft VC-820, treating as such.
2013-05-01 03:04:46 +02:00
b6bad47c91
uni-t-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:00:41 +02:00
2451a20ff5
fs9721: Factor out common code from serial-dmm.
...
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
2013-05-01 02:16:55 +02:00
4853559466
uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature.
2013-05-01 01:58:42 +02:00
ad00a54da6
fs9922: Fix beep mode.
2013-05-01 01:02:46 +02:00
649a4cd672
fs9922: Fix diode mode parsing.
2013-05-01 01:00:54 +02:00
767aae30ed
uni-t-dmm: Fix incorrect UNI-T UT61D baudrate.
2013-04-30 20:22:18 +02:00
695d0e1efa
uni-t-dmm: Add support for the Voltcraft VC-840.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
bbef5e326d
uni-t-dmm: Add support for the UNI-T UT61E.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
ae3a59de62
serial-dmm: Add support for the UNI-T UT61D.
...
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
2013-04-30 20:22:17 +02:00
3ece1dff6c
uni-t-dmm: Use sr_dev_inst to store connection handle.
2013-04-30 20:22:17 +02:00
d9a7c349ed
brymen-dmm: Use sr_dev_inst to store connection handle.
2013-04-30 20:22:17 +02:00
af51a7718e
output: Use sr_config_get() wrapper
...
This obviates the need for a valid driver, and thus makes converting
from any (non-sr) input format to any output format possible; the only
thing missing is the samplerate.
Fixes bug 105.
2013-04-30 16:03:37 +02:00
0a7da5f8c9
fx2lafw: Keep track of our own libusb fds
2013-04-30 09:55:44 +02:00
0372864451
Don't remove stray source from the session after stopping
...
It's up to the drivers and frontends to remove the sources they
added to the session.
Also don't tell the driver about a forced session stop more than
once, because it's sloppy.
Fixes bug 62.
2013-04-30 00:09:20 +02:00
2a67abfe34
fx2lafw: Properly initialize operational state before acquisition
2013-04-29 19:02:26 +02:00
0f75d6f5a9
ols: Don't close serial port after acquisition is done
2013-04-29 12:39:26 +02:00
681803dfde
Don't try to close devices when removing them from the session
...
That's the frontend's job.
2013-04-28 22:35:42 +02:00
115f829396
NEWS: Add most important items since last release.
2013-04-28 00:08:55 +02:00
a5e44c3247
tondaj-sl-814: Use sr_dev_inst to store connection handle.
2013-04-27 21:22:15 +02:00
44f91e2950
unittests: Disable a broken test for now.
2013-04-27 19:06:27 +02:00
50c604f50b
Don't automatically clear known instances from USB drivers on scan
...
This invalidates previously returned sr_dev_inst pointers, which a
frontend may be holding. It's the frontend's responsibility to clear
the list of instances a driver keeps track of by calling
sr_dev_clear(driver);
if it wants a completely new scan done.
2013-04-27 18:27:32 +02:00
Uwe Hermann
Bert Vermeulen