fec7aa6a44
saleae-logic16: Update copyright blurbs.
...
Copied copyright lines from fx2lafw driver, since much of the code is
taken from there.
2013-08-20 19:55:57 +02:00
db11d7d2d0
saleae-logic16: Add voltage threshold conf.
2013-08-20 19:55:57 +02:00
b117363ad7
saleae-logic16: Declare confs.
2013-08-20 19:55:57 +02:00
7b5daad45c
saleae-logic16: Implemented acquisition.
2013-08-20 19:55:57 +02:00
15abcf0f58
saleae-logic16: Initialize the FPGA.
...
The map_eeprom_data function is currently unknown. The map entries
provided were observed via bus-snooping of the vendor software on my
device. Other devices may need additional values.
2013-08-20 19:55:57 +02:00
5eea4305ad
saleae-logic16: Reworked scan/open to handle FW upload.
...
The new code is based on code from the fx2lafw driver.
2013-08-20 19:55:57 +02:00
f6a21fa50c
saleae-logic16: Detect the hardware.
2013-08-20 19:55:57 +02:00
6383365795
configure.ac: Fix build when libusb-1.0 not available.
...
The Saleae Logic16 needs libusb-1.0, thus disable this driver when
libusb-1.0 cannot be found.
2013-08-20 19:55:57 +02:00
c463dcf06c
saleae-logic16: Initial driver skeleton.
2013-08-20 19:55:22 +02:00
56e76981bc
uni-t-dmm: Require conn parameter for scan
...
Since the uni-t-ut32x series handles devices with the same USB VID.PID,
which is linked to the WCH CH9325 USB/HID-UART interface chip, this
driver can no longer assume it can handle anything with this VID.PID.
2013-08-11 10:52:43 +02:00
d6ff054ae5
uni-t-ut32x: Full acquisition support
2013-08-11 10:46:36 +02:00
6513f97fbe
uni-t-ut32x: Flesh out driver
2013-08-11 10:46:36 +02:00
3877dde43a
uni-t-ut32x: Initial driver skeleton.
2013-08-11 10:46:36 +02:00
4a8bbed76d
center-3xx: Initial Center 309 / Voltcraft K204 support.
2013-08-08 19:59:49 +02:00
4433145f48
center-3xx: Initial driver skeleton.
2013-08-08 19:58:48 +02:00
fc1bb735e4
Doxyfile: Set version to "unreleased development snapshot".
2013-08-08 19:39:50 +02:00
f6b5969014
Bump package version to 0.2.1, libtool version to 1:1:0.
...
The last release (0.2.0) had the libtool version (current:revision:age)
set to 1:0:0. Since this release doesn't add/change/remove any
interfaces, only 'revision' is increased, resulting in 1:1:0.
http://www.gnu.org/software/libtool/manual/libtool.html#Updating-version-info
Frontends using libsigrok don't need to be recompiled or relinked.
2013-08-07 16:21:58 +02:00
b11df97ad5
Doxyfile: Change version to 0.2.1.
2013-08-07 16:21:58 +02:00
f93c89b214
NEWS: Add entries for the upcoming 0.2.1 release.
2013-08-07 16:21:58 +02:00
6cda4600c1
README.devices: Minor documentation updates.
2013-08-07 16:21:57 +02:00
1861be0baf
Make sr_session_iteration() static.
...
This function is not used outside of session.c at the moment, so make
it static for now.
2013-08-07 16:21:57 +02:00
cdc30138c5
udev rules: Add missing IKALOGIC ScanaPLUS entry.
2013-08-07 16:21:57 +02:00
ce95428cca
Consistent use of "IKALOGIC" spelling.
...
The company name is written all-caps pretty consistently on the
vendor website and docs, so use that spelling everywhere.
2013-08-07 16:21:57 +02:00
b07b42f319
Cosmetics, typos.
2013-08-07 16:21:57 +02:00
059f36325e
unittests: Comment out a testcase.
...
The boundary test-case with SR_GHZ(18446744073ULL) currently fails, but
that is not practically relevant so comment it out for now, until we add
a proper fix.
2013-08-07 16:21:57 +02:00
094e6b8159
Format decimals correctly in sr_si_string_u64()
...
The function previously formatted 1004 as 1.4 k and 1004000 as 1.4 M.
The function now formats 1004 as 1.004 k, 1004000 as 1.004 M and
1004000000 as 1.004 G.
Fixes #73 .
2013-08-07 16:21:57 +02:00
ba253f2bb9
Fix sr_si_string_u64() test cases.
...
The function shall format 1004 as 1.004 k, 1004000 as 1.004 M and
1004000000 as 1.004 G.
References #73 .
2013-08-07 16:21:57 +02:00
e11a1ebacc
alsa: Fix double-free issue.
...
This fixes bug #129 .
2013-08-07 16:21:56 +02:00
4d7ddff75b
uni-t-dmm: Fix UT61E bug related to the UNI-T UD-D04 cable.
...
This fixes bug #136 .
2013-08-06 23:36:16 +02:00
ee2cc2d4dc
ikalogic-scanaplus: Don't build if libftdi was not found.
2013-08-05 14:52:44 +02:00
37d80736ab
kecheng-kc-330b: Don't build if libusb-1.0 was not found.
2013-08-05 13:34:10 +02:00
1a0c338220
.gitignore: Add some files from the testsuite.
2013-08-05 13:19:21 +02:00
59142ae177
Disable mso-19 per default, mark experimental.
...
This driver is not yet in a really usable or working state, it'll be
re-enabled by default when we're sure it works properly.
2013-08-05 13:16:31 +02:00
c51bbdec34
Drop nexus-osciprime skeleton for now.
...
This is mostly just a skeleton driver framework at the moment, we'll
bring it back when the driver is fully implemented.
2013-08-05 12:59:23 +02:00
c93ebace30
uni-t-dmm: Drop DMM table (comment).
...
This info is in the wiki already, no need to duplicate in the code.
2013-08-02 01:02:03 +02:00
faf720246a
ols: Workaround for mac os X stray events
2013-08-01 19:48:07 +02:00
ce4d26ddf9
Various cosmetics, whitespace, consistency fixes.
2013-07-31 13:09:48 +02:00
1663ebe27f
udev rules file: Only list supported devices.
...
The udev rules file should only list devices that are actually supported
by a driver in the current libsigrok version. Thus, drop all entries for
devices which will get support later on (at which point the respective udev
rule will be re-added again).
Also, add a few missing entries.
2013-07-31 12:31:47 +02:00
d1056603a0
udev rules file: Drop URLs and lsusb.
...
The URLs to vendor webpages and the full lsusb are in the wiki
already, no need to duplicate them here.
2013-07-31 12:22:06 +02:00
f6eb2cb555
Make sr_session_iteration() private
2013-07-18 15:06:37 +02:00
2b691be806
serial-dmm/uni-t-dmm: Drop Tecpel DMM-8060.
...
The Tecpel DMM-8060 was added since we assumed it would be a rebadged
Voltcraft VC-820 (since we know the Tecpel DMM-8061 is a rebadged VC-840).
However, according to the vendor webpage it doesn't have PC connectivity
at all, so drop it for now (until someone can confirm that it does or does
not actually have RS232/USB connectivity).
2013-07-18 12:43:07 +02:00
e84e0096db
Fix build
2013-07-16 17:18:20 +02:00
b979d0c9cb
kecheng-kc-330b: Code cleanup
2013-07-16 17:17:54 +02:00
d406dccd6a
lascar-el-usb: Don't close device after acquisition
2013-07-16 16:08:38 +02:00
85ed4ab3ba
kecheng-kc-330b: Acquisition from stored logs
2013-07-16 16:08:38 +02:00
b483be7456
Add sr_session_iteration() API function
2013-07-16 16:08:38 +02:00
f336618c3d
kecheng-kc-330b: Check device status before acquisition
...
Can't really count on it either way though, the device is just
too flaky to conclude whether it's going to work or not, regardless
of the status returned.
2013-07-16 16:08:38 +02:00
df03552894
kecheng-kc-330b: Live SPL acquisition
2013-07-16 16:08:38 +02:00
bc7be4a9f4
kecheng-kc-330b: Implement all SR_CONF options
2013-07-16 16:08:38 +02:00
c8bab81c5c
Add Kecheng KC-330B
2013-07-16 16:08:38 +02:00
Marcus Comstedt
Bert Vermeulen
Uwe Hermann
Peter Stuge
Paul Sokolovsky