464d49360a
rigol-ds: Deal with dev_close() getting called multiple times.
2014-01-27 21:19:41 +01:00
ca9b9f4834
hwdriver: Change TRIGGER_SLOPE setting to string type.
...
Drivers interpreted the uint64 values to the SR_CONF_TRIGGER_SLOPE
configuration setting in different ways. In order to orthogonalize
the API, change the type of the setting to a string with the same
format as uses for logic probes.
2014-01-27 20:55:01 +01:00
824eb2acfd
rigol-ds: Fix divide by zero when no analog probes selected.
2014-01-23 01:42:34 +01:00
569d4dbd3e
rigol-ds: Overhaul vendor/series/model info and protocol variants.
2014-01-23 01:42:33 +01:00
e086b750fa
rigol-ds: Overhaul VS5000 and DS1000 support.
...
This change moves the handling of series differences out to the points in the
code where they actually matter, unifying the overall structure of the code.
It also adds new VS5000/DS1000 series equivalents for commands that were
previously only implemented on the later models.
After this change, trigger waiting and the 'Memory' data source are supported
on the VS5000/DS1000 series.
2014-01-23 01:42:33 +01:00
38354d9d9e
rigol-ds: Use common rigol_ds_config_set() function throughout.
2014-01-23 01:42:33 +01:00
22c196883d
rigol-ds: Disable key lock when closing device.
2014-01-21 17:52:23 +01:00
10d309c8ab
rigol-ds: DS1000 series still needs the stupid delay.
2014-01-21 13:10:29 +01:00
8dd0b290eb
rigol-ds: On DS1000 with firmware < 0.2.4, use legacy protocol.
...
Apparently the ASCII header containing length was only added in version
0.2.4.
2014-01-21 13:05:06 +01:00
fcdebbe89c
rigol-ds: Shorten vendor name.
2014-01-20 19:08:10 +01:00
2b0e4a468a
rigol-ds: add support for more keys in config_get()
2014-01-20 00:34:57 +00:00
72ecba02f4
rigol-ds: use appropriately defined NUM_VDIV constant
2014-01-20 00:34:57 +00:00
8e06edf528
rigol-ds: add more valid timebases for DS2302
2014-01-20 00:34:57 +00:00
889ef4a01c
rigol-ds: fix set_cfg() calls with float parameters to avoid locale issues
2014-01-20 00:34:56 +00:00
f76c24f6fd
rigol-ds: Send FRAME_BEGIN and FRAME_END per frame, not per channel.
2014-01-20 00:24:57 +00:00
51bfe5363a
rigol-ds: Use *OPC? command rather than delay to await completion.
2014-01-20 00:24:57 +00:00
470140fc0d
rigol-ds: DS1000 series actually use IEEE488.2 data block format.
2014-01-20 00:24:57 +00:00
d22250a96a
rigol-ds: Correct digital waveform block sizes.
2014-01-20 00:24:14 +00:00
904fd29b72
rigol-ds: Update which channels are enabled after making changes.
2014-01-20 00:24:14 +00:00
c2b394d562
rigol-ds: Minor whitespace fixes.
2014-01-17 02:03:09 +01:00
04e8e01ec6
rigol-ds: Enable/disable LA pod when (de)selecting digital channels.
2014-01-17 01:52:29 +01:00
51b294cd01
rigol-ds: Reset num_frames to zero in dev_acquisition_start.
2014-01-17 01:52:29 +01:00
b751cf7a82
rigol-ds: Make sure to always send SR_DF_END at end of capture.
2014-01-17 01:52:29 +01:00
4914dd4b9a
rigol-ds: Calculate effective samplerate.
2014-01-17 01:52:29 +01:00
5415e60247
rigol-ds: Separate function to compute analog frame size.
2014-01-17 01:52:29 +01:00
c1bcb8cc63
rigol-ds: Advertise SR_CONF_LIMIT_FRAMES support.
2014-01-17 01:52:29 +01:00
969edf6306
rigol-ds: Fix check for probe group validity.
2014-01-17 01:52:29 +01:00
d993d8d39d
rigol-ds: remove lonely break
2014-01-14 00:01:50 +01:00
a31b2ccbd8
rigol-ds: prevent config_list() to return empty g_variant
...
This fixes the following glib message:
$ ./sigrok-cli -d rigol-ds --show
[...]
g_variant_builder_end: assertion '!GVSB(builder)->uniform_item_types || GVSB(builder)->prev_item_type != NULL || g_variant_type_is_definite (GVSB(builder)->type)' failed
2014-01-14 00:01:50 +01:00
c3515cea44
scpi: factorize dev_inst_new calls out of individual drivers
2014-01-11 22:36:46 +01:00
d5876cfb4a
scpi: add VXI transport support
2014-01-11 22:36:09 +01:00
036d378a62
rigol-ds: add a few more DS2000 models to the supported list
2014-01-03 17:54:47 +01:00
0709197deb
rigol-ds: Correct usage of NUM_TIMEBASE and NUM_VDIV config keys.
2013-12-29 13:22:32 +01:00
227a0981c0
rigol-ds: Support the rest of the DSO1000 range.
2013-12-29 01:39:49 +01:00
821fbcadcc
rigol-ds: Support 4 analog channels.
2013-12-29 01:34:58 +01:00
0d9f5a12cb
rigol-ds: Use correct live waveform size for Agilent DSO1000 series.
2013-12-29 00:35:09 +01:00
10afee13a3
rigol-ds: Add support for Agilent DSO1014A.
2013-12-29 00:27:11 +01:00
9e4b7d9833
rigol-ds: Use correct analog frame size for VS5000 series.
2013-12-28 14:05:56 +01:00
6396b0a76b
rigol-ds: Use set_cfg wrapper for capture setup commands.
2013-12-28 14:05:56 +01:00
1fed20cb38
rigol-ds: Select channels before issuing RUN command.
2013-12-28 14:05:55 +01:00
677f85d00b
rigol-ds: Use rigol_ds_channel_start() function for legacy protocol too.
2013-12-27 22:47:42 +01:00
0d87bd93eb
rigol-ds: Rename and document some confusingly named variables.
2013-12-27 22:47:42 +01:00
b4936bae0a
rigol-ds: close SCPI device after using for scan.
2013-12-07 19:43:47 +00:00
7cf1a98d73
rigol-ds: Minor error reporting fix.
2013-12-05 00:21:15 +01:00
962af1a379
rigol-ds: Support VS5000 series devices.
2013-12-04 21:38:05 +00:00
3520422fc7
rigol-ds: Support TCP connection.
2013-12-04 20:59:24 +00:00
0dc7b43eb7
rigol-ds: Support RS232 connection.
...
Probing tested OK over RS232 for DS1052E and DS1102D. Capture needs work.
2013-12-04 12:50:12 +00:00
4d7a9a14a3
rigol-ds: Eliminate fixed-size buffer in set_cfg.
2013-12-04 10:56:09 +00:00
17b5b20264
Replace rigol_ds_send() function with sr_scpi_send().
2013-12-04 10:30:46 +00:00
ae1bc1cc26
Port rigol-ds driver to use common SCPI functions.
2013-12-03 23:19:40 +00:00
Bert Vermeulen
Daniel Elstner
Martin Ling
Aurelien Jacobs
Uwe Hermann