This adds basic support for the Rigol MSO5000 series. It has
the same problems as the DS4000 series: Live capture provides
one digital channel per byte. Buffered memory returns the data
compressed (one byte has 8 digital channels), but the banks are
read separately. It's not possible to read uint16.
Update the default serial port options for Rohde&Schwarz and
Hameg mixed-signal oscilloscope devices connected through USB.
Also, remove misplaced and unused serial port configuration option.
This patch complements fa3d104f17
in terms of updating the USB PIDs for new devices (HMO series).
This fixes parts of bug #1321.
If no serial port option is specified on the command-line using the
"serialcomm" driver option, but the device is connected through USB
and it requires a known default serial port option, then use it in
order to avoid data corruption or even worse problems.
Note: the easiest way to reproduce data corruption on HMO3000 series
is to start an analog data acquisition (e.g. on channel CH1) after
switching from Ethernet mode to USB VCP mode (HO732 USB/Ethernet interface).
This fixes parts of bug #1321.
Correctly set the length of the buffer used to hold the SCPI response
from the device containing the binary acquisition data.
If a timeout occurs, truncate the buffer and send the partial response
from the device instead of getting stuck on timeouts!
Thanks to Stefan Brüns for reviewing the first version of this patch
and spotting out a serious problem with it.
This fixes bug #1323.
Add guards around the implementation of ES51919 chip support for LCR, as
well as modbus and SCPI over serial. To accept when the source files get
compiled in the absence of their dependencies, end up with an empty
implementation in that case.
This approach can simplify build rules when several optional external
dependencies result in differing sets of supported communication means.
Introduce the HAVE_SERIAL_COMM identifier, which gets derived from, but
need not be identical to the HAVE_LIBSERIALPORT condition.
Derive the NEED_SERIAL automake condition from the general availability
of serial communication not the specific libserialport library.
Adjust source code references. Stick with HAVE_LIBSERIALPORT where the
specific library is meant, but switch to HAVE_SERIAL_COMM where the
availability of serial communication in general is meant.
The SCPI protocol may communicate strings in quoted form, enclosed by a
matching pair of single or double quote characters, and occurances of
this very quote character within the string get doubled (escaped). Add a
common routine to undo the quotes.
Acquisition won't work correctly in a multi-threaded environment, when
config_set() and config_get() are called with a channel group.
The channel switching itself has moved to scpi/scpi.c, to be able to
handle switching in a thread safe way.
This ensures that SCPI read/write/write+read operations are thread safe.
F.e.: If a write operation expects a return value (in other words: a
read operation), it is not allowed to be interrupted by another write
operation.
To simplify things, the SCPI helper functions are moved from
scpi/helpers.c to scpi/scpi.c and also are renamed to fit the naming
scheme.
libgpib in particular will abort the program execution in case of
concurrent operations.
These trigger quite often with unrelated devices and confuse people.
scpi_usbtmc: Failed to get configuration descriptor: LIBUSB_ERROR_NOT_FOUND, ignoring device.
Make the USB reset for USB TMC devices conditional. Check a whitelist,
which in this implementation exclusively contains the Siglent VID.
The whitelist's comment may need adjustment. The VID probably not only
applies to SDS devices, but could be used for SDG and others as well.
And lsusb output suggests the VID is used by Atten, too.
Add the Siglent's VID to a list of blacklisted USB TMC devices.
Unconditionally reset USB devices in the open routine.
This was taken from marchel's development for Siglent SDS. Though the
reset should probably be conditional, and only get applied to devices
which are known to need it.
The comment may need adjustment, maybe individual PID entries are
required. The VID probably not only applies to SDS devices, but could
be used for SDG and other gear as well. And lsusb output suggests the
VID is used by Atten, too.
The 'opc' variable was only conditionally assigned to (depends on
successful SCPI communication). Ensure there always is a known value.
This was reported by clang's scan-build.
Some drivers used locale dependent functions for converting strings
to float/double values. These functions fail when the decimal mark
is a "," in the locale settings but the string contains a ".".
This fixes bug #1064.
Drop unneeded log messages, add some others that might be useful,
document which ones we're intentionally not emitting.
Don't log "$operation successful" type of messages in most cases,
that's too verbose; logging failures only is sufficient there.
baylibre-acme: Don't log "No such file or directory" messages during scan,
this triggers on all kinds of unrelated devices (e.g. "AMDGPU i2c bit
bus 0x91" in this case):
sr: [...] baylibre-acme: Name for probe 1 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0040/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 2 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0041/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 3 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0044/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 4 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0045/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 5 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0042/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 5 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004c/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 6 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0043/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 6 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0049/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 7 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0046/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 7 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004f/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 8 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-0047/name”: No such file or directory
sr: [...] baylibre-acme: Name for probe 8 can't be read: Failed to open file “/sys/class/i2c-adapter/i2c-1/1-004b/name”: No such file or directory
When using SCPI over serial (over USB), we want the header without waiting
for the terminating newline, as otherwise the transfer may time out.
sr_scpi_get_data() will block until the message is complete.
Lowlevel access functions should not alter the data. sr_scpi_get_string(),
which is called by most highlevel access functions, strips newlines
in a central place, and is only fed with data which contains newlines
as a final terminator.
IEEE 488.2 definite length blocks may contain arbitrary data, thus the
payload up to the provided length should be passed unaltered.
Track if the last received character is a newline, which can be used
by sr_scpi_get_string() and its callers to determine if the response
is complete.
g_get_monotonic_time() returns current time in microseconds, use the same
granularity for storing the read timeout.
There is also no need to check the timeout if data has just been read.
When nothing was received in a read attempt, we need not adjust the
buffered data's read position nor the glib string object's size. Skip
any processing for empty input, just keep checking for timeouts.
Routine sr_scpi_get_data() checks for free space in the receive buffer,
and resizes the buffer when free space drops below a threshold. The
previous logic assumed that the resize and the read logic would interact
in some specific way to achieve the desired operation.
Adjust the buffer resize such that more free space is pre-allocated, yet
the payload size of the buffer is not affected. This eliminates the
dependency of the optional resize logic from subsequent activity for
reception of data that is non-optional.
Add comments while we are here, outline the steps taken in the
sr_scpi_get_data() routine.
Undo the change which skips management activities when no data was
received. This change breaks the current implementation, and needs to
get deferred until a delicate interaction between the resize and the
read logic has been eliminated.
Slightly rephrase the SCPI code which parses the responses that carry
(binary) data blocks. Be explicit about NUL termination when parsing the
leading length spec in the response, obsoleting the array initializer.
Add lots of comments and group source code lines to better reflect
what's happening from the protocol's perspective.
Fix the returned error code in the path which reads responses of
excessive length in chunks. The previous implementation detected errors
but always returned code 0 (success).
When nothing was received in a read attempt, we need not adjust the
buffered data's read position nor the glib string object's size. Skip
any processing for empty input, just keep checking for timeouts.
Drop an initial assignment to a variable which never takes effect.
Add braces around the body of a more complex if block. Separate routines
from each other by exactly one empty line.
Binary block data is specified in IEEE 488.2. First character is '#',
followed by a single ascii digit denoting the the number of digits needed
for the length specification. Length is given in bytes.
This allows drivers to replace retrieval of comma separated ASCII values
with binary formats. See bug #791.
While some transports add a terminating (carriagereturn+)linefeed
unconditionally, the USBTMC transport does not. At least the R&S HMO1002
requires the linefeed and locks up otherwise. Fixes bug #784.
This changes the TCP and VXI transport from CR+LF to LF only.
Also fixes a possible memory leak for VXI, where the temporary command
buffer was not freed in case of a write error.
Sebastian Reichel
Guido Trentalancia
Gerhard Sittig
Frank Stettner
Martin Ling
Valentin Ochs
Uwe Hermann
Sylvain Pelissier
Sven Schnelle
Stefan Brüns