This patch adds a function to read and parse a SCPI response which contains a
comma separated list of unsignet 8-bit integer numbers (e.g "1,0,64").
This is particularly useful if the instrument sends digital measurement data
in this format.
This patch adds a function to read and parse a SCPI response which contains a
comma-separated list of floating-point numbers (e.g. "1.0e-5,2.0e-4,3.0e-3").
This is particularly useful if the instrument sends analog measurement
data in this format.
The SCPI standard specifies the "*OPC?" command (Operation complete query) which
queries the instrument for its operative state. When all pending operations are
complete, the instrument responds with a "1".
Some manufacturers block before completing all operations and don't respond
with anything and some of them respond with a "0". This function handles both
cases uniformly.
This patch adds helper functions to read an SCPI response and parse the response
as an integer, boolean, floating-point or double-precision floating-point number.
The Standard Commands for Programmable Instruments (SCPI) defines a standard
for syntax and commands to use in controlling programmable test and measurement
devices.
SCPI documentation:
http://www.ivifoundation.org/docs/scpi-99.pdf
This patch adds helper functions for sending SCPI commands, reading a SCPI
response and reading and parsing a SCPI "*IDN?" response.
SR_CONF_PATTERN_MODE was not handled in config_list(), yielding
non-working OLS support in PulseView (due to an assert), and a missing
pattern list in sigrok-cli's --show output.
This fixes bug #184.
The scan() function was opening the port in non-blocking mode, the dev_open()
function however was not using the SERIAL_NONBLOCK flag. This led to hangs
in certain situations.
This fixes the OLS e.g. on NetBSD.
A new sp_port is created every time we call serial_open (sp_get_port_by_name
implicitly creates one for us), so free it every time we call serial_close.
Without a SR_DF_END samples could be cached in the internal buffer of an output
module and never flushed, therefore they would be missing in the final output.
By sending a SR_DF_END packet we force the output to be flushed.
Disable drivers that need serial port support if libserialport is not found.
Also, disable building various other serial port related code in that case.
The bandwith in Rigol DS1xx2D/E scopes can be upgraded to 150 MHz in software.
So detect also scopes with the upgraded bandwith.
using libsigrok-0.2.1 + this change + commit da970d24ec (required for newer kernels):
[dan@eagle sigrok]$ sigrok-cli --scan -d rigol-ds1xx2 -l 5
sr: libsigrok loglevel set to 5.
sr: Sanity-checking all drivers.
sr: Sanity-checking all input modules.
sr: Sanity-checking all output modules.
srd: libsigrokdecode loglevel set to 5.
sr: hwdriver: Initializing driver 'rigol-ds1xx2'.
sr: serial: Opening serial port '/dev/usbtmc0' (flags 1).
sr: serial: Opened serial port '/dev/usbtmc0' (fd 7).
sr: serial: Wrote 5/5 bytes (fd 7).
sr: serial: Closing serial port /dev/usbtmc0 (fd 7).
sr: rigol-ds1xx2: response: /dev/usbtmc0 [Rigol Technologies,DS1152D,DS1EU150XXXXXX,00.04.01.00.02]
sr: hwdriver: Scan of 'rigol-ds1xx2' found 1 devices.
The following devices were found:
rigol-ds1xx2 - Rigol Technologies DS1152D 00.04.01.00.02 with 18 probes: CH1 CH2 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15
Most Metex DMMs use e.g. " mV" as unit field, others use "mV ",
though. Support these (and other) whitespace variants by stripping all
spaces and only comparing non-space characters.
If buf contains exactly the string "Agilent Technologies" (for example if
there are bugs in the timeout logic or serial driver causing the reply from
the meter to be abridged) then this code will SEGV. This is because tokens[1]
is NULL but only tokens[2] and tokens[3] (both of which are undefined) are
NULL checked.
Can be trivially corrected by NULL checking tokens[1] as well.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
g_usleep(XX) sleeps for *at least* XX microseconds but may sleep for
longers (on older kernels the sleep will typically be 10000us). Thus
byte receive loops containing an unconditional sleep will perform
very poorly (for example it causes the scan in agilent-dmm to timeout
prematurely).
Even on modern kernels serial_readline() has a 2ms sleep per byte which
means it will read at a maximum rate of half a character per millisecond
(~4800baud).
This is fixed by only sleeping when read() returns no data.
Signed-off-by: Daniel Thompson <daniel@redfelineninja.org.uk>
This DMM is not using the standard bits in the FS9922 protocol/structure
to indicate the "volt" and "diode mode" flags. Instead, it only sets the
user-defined bit "z1" to indicate both "diode mode" and "volt".
This fixes#142.
This is no longer used, and also it is not available on Android and thus
breaks cross-compilation for Android.
Thanks Marcus Comstedt <marcus@mc.pp.se> for reporting.
For demux mode we half the channels. Previous check method broke
the OLS randomly and but it in a bad state.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
demux mode allows DDR sampling which disables group 2 & 3
and thus samples group 0 & 1 to sample on rising and falling of
the clock.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Allow channel groups to be swapped. This is useful
for demux at 200mhz with the unbuffered channels.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
The high bit of the sample, denoting this is a count, was not getting
properly cleared. This resulted in an inevitably negative count, and
corruption of the sample buffer before it was transferred to the
frontend.
The single sample buffer, up to 4 bytes long, was not getting initialized
on (every) acquisition start, only after the first full sample was in.
This caused the first sample to potentially hold garbage.
ols allows both external and internal test patterns at ~20khz
which are helpful for unit tests and demos.
pattern=internal -> route pattern internally to all 32 pins
(input otherwise disabled)
pattern=external -> generates pattern on unbuffered pins 16:31
(which can be looped back to the buffered pins 0:15)
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Stage count was always getting incremented one more than
actual stages, and this caused a extra stage with zero'ed data
probe lines to have the start bit field.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
poljar (Damir Jelić)
poljar (Damir Jelić)
Uwe Hermann
Martin Ling
Bert Vermeulen
Matthias Heidbrink
Dan Horák
Sean Young
Aurelien Jacobs
Daniel Thompson
Matt Ranostay