85ed4ab3ba
kecheng-kc-330b: Acquisition from stored logs
2013-07-16 16:08:38 +02:00
f336618c3d
kecheng-kc-330b: Check device status before acquisition
...
Can't really count on it either way though, the device is just
too flaky to conclude whether it's going to work or not, regardless
of the status returned.
2013-07-16 16:08:38 +02:00
df03552894
kecheng-kc-330b: Live SPL acquisition
2013-07-16 16:08:38 +02:00
bc7be4a9f4
kecheng-kc-330b: Implement all SR_CONF options
2013-07-16 16:08:38 +02:00
a8806f032c
kecheng-kc-330b: Flesh out driver, add scan functionality
2013-07-16 16:08:38 +02:00
ed759a0835
kecheng-kc-330b: Initial driver skeleton.
2013-07-16 16:08:38 +02:00
ab4bb6eb7c
ikalogic-scanaplus: Initial driver implementation.
2013-07-16 01:01:11 +02:00
fdf4a1f5a0
ikalogic-scanaplus: Initial driver skeleton.
2013-07-15 12:20:53 +02:00
a7a163a795
Support for UNI-T UT60A/E multimeters via RS232 or USB
2013-07-09 22:57:55 +02:00
fb8d593cfe
Use GET_REPORT request for device to host transfer.
2013-07-05 14:01:06 +02:00
c134574938
uni-t-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
6045b91aa4
serial-dmm: Add support for the Voltcraft VC-830.
2013-06-23 10:23:21 +02:00
cea26f6e9f
cem-dt-885x: Support for retrieving stored samples
2013-06-20 14:35:34 +02:00
662172d4f4
cem-dt-885x: Support for SR_CONF_DATA_SOURCE
...
This device can do both live and memory-based acquisition.
2013-06-19 12:23:30 +02:00
4c22355f04
cem-dt-885x: Support for powering off the device
2013-06-17 16:17:39 +02:00
f157b2eebb
cem-dt-885x: Support for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
0cd9107dfb
cem-dt-885x: Fix datalog on/off setting in max/min hold mode
...
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
2013-06-17 16:17:39 +02:00
a90e480cdc
cem-dt-885x: Support for max/min hold modes
2013-06-17 16:17:39 +02:00
1487ce4fbc
cem-dt-885x: Support for changing time weighting
2013-06-17 16:17:39 +02:00
be73391982
cem-dt-885x: Support for changing frequency weighting
2013-06-17 16:17:39 +02:00
e1af0e85b9
cem-dt-885x: Support for turning data logging on/off
2013-06-17 16:17:38 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
14cf708fef
cem-dt-885x: Send last measurement at normal rate in hold mode
...
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
2013-06-12 18:34:42 +02:00
bc1143280f
cem-dt-885x: Hold off measurements in max/min hold mode
2013-06-12 18:34:42 +02:00
e37c4b3959
cem-dt-885x: Live SPL acquisition
2013-06-12 18:34:42 +02:00
7fb8279c9b
cem-dt-885x: Flesh out driver, add scan functionality
2013-06-12 18:34:42 +02:00
8fa9368eb4
cem-dt-885x: Initial driver skeleton.
2013-06-12 18:34:42 +02:00
28083961fb
scanalogic2: Only print actual state changes in the log.
2013-06-11 18:39:55 +02:00
9526f2d4f8
scanalogic2: Replace %i with %s where needed.
2013-06-11 18:39:54 +02:00
79914b3a62
scanalogic2: Shorten a few function name prefixes.
...
The driver-private helper functions in protocol.c can have a shorter
prefix to make the code look nicer.
2013-06-11 18:39:54 +02:00
c824eb6323
scanalogic2: Cosmetics, whitespace, typos, etc.
2013-06-11 18:39:54 +02:00
e52e712d05
Initial driver for IKALOGIC Scanalogic-2
2013-06-11 18:39:54 +02:00
16e76baec9
ikalogic-scanalogic2: Initial driver skeleton.
2013-06-11 18:39:54 +02:00
eea49cf10d
ols/link-mso19: Consistency fixes.
...
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
2013-06-02 17:03:40 +02:00
1c2d542df2
demo: Use std_dev_clear().
2013-06-02 16:57:07 +02:00
3b412e3a30
s/clear_instances/dev_clear/.
...
Consistently use the same name for the dev_clear() API callback
everywhere.
2013-06-02 16:56:41 +02:00
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
3678cf73fe
asix-sigma: Use std_dev_clear().
2013-06-02 16:46:18 +02:00
c43cf4d40e
alsa: Use std_dev_clear().
2013-06-02 16:46:17 +02:00
fa85f37630
rigol-ds1xx2: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
dec6c583a2
hantek-dso: Simplify cleanup().
2013-06-02 13:52:40 +02:00
658636f1c9
nexus-osciprime: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
c9d622a420
lascar-el-usb: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
771bd216fa
fluke-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
732899f8cf
colead-slm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
676c28a846
agilent-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
8d18d266f5
victor-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
40bbc64293
brymen-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
6078d2c996
Use consistent API callback function names.
...
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
8111446ae0
zeroplus: Properly set inst_type to SR_INST_USB.
2013-05-10 19:16:25 +02:00
d6445cb0da
zeroplus: Use std_dev_clear().
2013-05-10 19:06:47 +02:00
8dca646ef9
uni-t-dmm: Use std_dev_clear().
2013-05-10 18:59:46 +02:00
3f0513bac1
serial-dmm: Use std_dev_clear().
2013-05-10 18:53:42 +02:00
9790079961
chronovu-la8: Use std_dev_clear().
2013-05-10 18:40:13 +02:00
decfe89d4e
Drop some lines that are no longer needed.
2013-05-10 18:30:32 +02:00
0bdb4f2e4a
tondaj-sl-814: Use std_dev_clear().
2013-05-10 17:56:53 +02:00
25e7adada7
mic-985xx: Use std_dev_clear().
2013-05-10 17:54:53 +02:00
2a052cc4d6
Use consistent naming for internal libtool helper libs.
...
This now also matches what the 'new-driver' tool generates.
2013-05-10 17:44:01 +02:00
9e165e742f
Use consistent HW_ name prefixes everywhere.
...
Older drivers used LA_* previously, we now use HW_* everywhere though.
2013-05-10 17:18:42 +02:00
7ab89f4827
Re-enable link-mso19 and nexus-osciprime drivers.
2013-05-08 16:40:45 +02:00
9dc7a75e3d
fx2lafw: Fix memory leak
2013-05-06 20:44:26 +02:00
03f4de8cf2
ols: Code cleanup
...
This also fixes a memory leak.
2013-05-06 00:42:18 +02:00
26aec7fdc4
Drop link-mso19/nexus-osciprime in preparation for release.
...
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
2013-05-04 15:59:40 +02:00
c5ffac4148
uni-t-dmm: Add missing SR_CONF_LIMIT_MSEC support.
2013-05-04 00:13:25 +02:00
29a27196a1
s/DRIVER_LOG_DOMAIN/LOG_PREFIX/.
...
This is more correct anyway, and also a bit shorter and more readable.
2013-05-03 21:59:32 +02:00
06c45a66f7
Minor whitespace fixes.
2013-05-03 14:03:49 +02:00
c2fa697afa
serial-dmm: Add Tecpel DMM-8060 support.
2013-05-01 03:16:47 +02:00
b38e08fbb7
serial-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:13:43 +02:00
4554314c4f
uni-t-dmm: Add Tecpel DMM-8060 support.
...
This is _very_ likely to be a rebadged Voltcraft VC-820, treating as such.
2013-05-01 03:04:46 +02:00
b6bad47c91
uni-t-dmm: Add Tecpel DMM-8061 support.
2013-05-01 03:00:41 +02:00
2451a20ff5
fs9721: Factor out common code from serial-dmm.
...
These functions are FS9721 specific (and DMM specific), and can be used
from various drivers (e.g. serial-dmm or uni-t-dmm or possibly others).
2013-05-01 02:16:55 +02:00
4853559466
uni-t-dmm/serial-dmm: Handle Voltcraft VC-840 temperature.
2013-05-01 01:58:42 +02:00
ad00a54da6
fs9922: Fix beep mode.
2013-05-01 01:02:46 +02:00
649a4cd672
fs9922: Fix diode mode parsing.
2013-05-01 01:00:54 +02:00
767aae30ed
uni-t-dmm: Fix incorrect UNI-T UT61D baudrate.
2013-04-30 20:22:18 +02:00
695d0e1efa
uni-t-dmm: Add support for the Voltcraft VC-840.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
bbef5e326d
uni-t-dmm: Add support for the UNI-T UT61E.
...
This DMM is already supported via the serial-dmm driver when using the
RS232 cable. The uni-t-dmm support makes it usable with the USB/HID
cable too.
2013-04-30 20:22:17 +02:00
ae3a59de62
serial-dmm: Add support for the UNI-T UT61D.
...
This DMM is already supported via the uni-t-dmm driver when using the
USB/HID cable. The serial-dmm support makes it usable with the RS232
cable too.
2013-04-30 20:22:17 +02:00
3ece1dff6c
uni-t-dmm: Use sr_dev_inst to store connection handle.
2013-04-30 20:22:17 +02:00
d9a7c349ed
brymen-dmm: Use sr_dev_inst to store connection handle.
2013-04-30 20:22:17 +02:00
0a7da5f8c9
fx2lafw: Keep track of our own libusb fds
2013-04-30 09:55:44 +02:00
2a67abfe34
fx2lafw: Properly initialize operational state before acquisition
2013-04-29 19:02:26 +02:00
0f75d6f5a9
ols: Don't close serial port after acquisition is done
2013-04-29 12:39:26 +02:00
a5e44c3247
tondaj-sl-814: Use sr_dev_inst to store connection handle.
2013-04-27 21:22:15 +02:00
50c604f50b
Don't automatically clear known instances from USB drivers on scan
...
This invalidates previously returned sr_dev_inst pointers, which a
frontend may be holding. It's the frontend's responsibility to clear
the list of instances a driver keeps track of by calling
sr_dev_clear(driver);
if it wants a completely new scan done.
2013-04-27 18:27:32 +02:00
b9470914d0
Remove sr_rational
2013-04-26 22:51:12 +02:00
bc653a5678
uni-t-dmm: Do proper detection of packets in the stream.
...
Also, various fixups in the driver.
2013-04-26 20:54:21 +02:00
c885268777
uni-t-dmm: Make driver more similar to serial-dmm.
2013-04-26 20:05:44 +02:00
7381251e33
common/dmm: Drop obsolete *is_packet_start() functions.
2013-04-26 20:05:44 +02:00
913abe8321
fs9922: Use common DMM API.
...
Use the same functions and structs as the other DMM protocol parsers
in hardware/common/dmm. Among other things, this allows the functions
to be used from drivers in a generic way, e.g. in serial-dmm, uni-t-dmm,
and possibly other drivers.
2013-04-26 20:05:44 +02:00
695f32d89d
Bring back link-mso19/nexus-osciprime for now.
...
This patch will be re-introduced later.
2013-04-26 10:47:34 +02:00
9d1164f9a1
Drop link-mso19/nexus-osciprime in preparation for release.
...
These two drivers are currently unfinished and don't work, so disable
and "unhook" them for now in preparation of the next libsigrok release.
They're still in the git repository, but not hooked up to the build
system, so that they won't get detected or built, and also don't end up
in the release tarball.
Since link-mso19 is the only driver that currently requires libudev,
drop any reference to that, too.
It should be relatively easy to apply this patch in reverse after the
release to bring back both drivers.
2013-04-25 19:16:13 +02:00
e73ffd4238
Enforce open device before config_set()/dev_acquisition_start()
2013-04-24 22:03:50 +02:00
46a743c1fa
Whitespace fixes
...
Damn editor.
2013-04-24 19:07:46 +02:00
a31a4d371f
fx2lafw: Minor cleanup
2013-04-24 03:23:23 +02:00
294dbac724
hantek-dso: Support conn scan parameter
2013-04-24 03:23:23 +02:00
cc9fd2d29c
rigol-ds1xx2: Code cleanup
2013-04-24 03:23:11 +02:00
9bd4c95606
rigol-ds1xx2: Use common serial code.
2013-04-24 02:10:25 +02:00
ca55277ca8
rigol-ds1xx2: Accept SR_CONF_CONN.
2013-04-24 02:10:25 +02:00
886bd5e056
mic-985xx: Use sr_dev_inst to store connection handle.
2013-04-23 23:06:02 +02:00
31e5377250
Fix minor warning with some compilers.
2013-04-23 22:54:02 +02:00
50985c2019
GPL headers: Use correct project name.
2013-04-23 22:24:30 +02:00
1e1bfcd0fe
serial-dmm: Use sr_dev_inst to store connection handle.
2013-04-23 20:55:04 +02:00
609bfd753c
zeroplus-logic-cube: Use sr_dev_inst to store connection handle
2013-04-22 15:00:04 +02:00
459a0f2623
ols: Use sr_dev_inst to store connection handle
2013-04-22 13:40:40 +02:00
2e5b73c00c
ols: Fix stack clobbering at start of acquisition
...
This off-by-one was clobbering the stack since introduced in a803c0db4d
2013-04-22 13:33:31 +02:00
919681f0e8
fluke-dmm: Use sr_dev_inst to store connection handle
2013-04-22 01:07:35 +02:00
aa7066353c
colead-slm: Use sr_dev_inst to store connection handle
2013-04-22 01:01:10 +02:00
fb3a150599
agilent-dmm: Use sr_dev_inst to store connection handle
2013-04-21 21:49:15 +02:00
e31d410d26
rigol-ds1xx2: fix delay time.
2013-04-21 20:42:22 +01:00
d2e0b1fa71
rigol-ds1xx2: better error handling in hw_scan.
2013-04-21 19:48:34 +01:00
8bb2981df0
victor-dmm: Allow configuration before the device is opened
2013-04-20 15:26:16 +02:00
ac046ef8cf
victor-dmm: Support SR_CONF_CONN
2013-04-18 22:48:29 +02:00
0f1506497b
lascar-el-usb: Support SR_CONF_CONN
2013-04-18 22:48:29 +02:00
e2033d4917
hantek-dso: Consistently return SR_ERR_ARG if sdi is needed
2013-04-18 22:48:29 +02:00
38ab8dbec8
fx2lafw: Consistently return SR_ERR_ARG if sdi is needed
2013-04-18 22:48:29 +02:00
624f5b4c1e
hantek-dso: Support config_get(SR_CONF_CONN)
2013-04-18 01:24:42 +02:00
89befd46a8
fx2lafw: Support config_get(SR_CONF_CONN)
...
This generates a bus.address conn string which can be used to
uniquely identify the given sr_dev_inst.
2013-04-18 01:24:42 +02:00
d0eec1eea1
hantek-dso: Mark connection as USB
2013-04-17 01:08:18 +02:00
949b3dc091
hantek-dso: Use std_dev_clear()
2013-04-17 00:49:41 +02:00
72f9d6dc5e
fx2lafw: No device context internals to clear
2013-04-17 00:49:41 +02:00
c118080b1d
hantek-dso: Store USB connection in sr_dev_inst
2013-04-17 00:49:41 +02:00
415e6389ce
chronovu-la8: Fix incorrect 0Hz samplerate being reported.
...
This closes bug #93 .
2013-04-16 22:35:17 +02:00
250a78c7d5
fx2lafw: Use standard dev_clear() instead
2013-04-16 17:57:08 +02:00
bd6fbf628a
drivers: return SR_ERR_NA on unsupported config key
...
Fixes bug 89.
2013-04-16 11:00:55 +02:00
72cd99b876
ols: Report when a device doesn't support metadata
...
Not an error, but it does mean it's either a really old or really
basic device, and will help us to debug people's problems with
these.
Fixes bug 92.
2013-04-16 00:23:34 +02:00
754b5ff2b4
fx2lafw: Support conn scan parameter
...
This takes a USB specification. Fixes bug 82.
2013-04-15 23:56:33 +02:00
1eb0a0df66
usb: Fix bus.address format detection
2013-04-15 23:47:04 +02:00
e5d15bd2a2
ols: Allow configuration before the device is opened
2013-04-15 20:05:43 +02:00
a7be14ada2
rigol-ds1xx2: Don't assume there's a valid sdi
2013-04-15 18:45:38 +02:00
bf25678359
ols: Properly initialize operational state before start
2013-04-15 18:28:43 +02:00
e45ad6e24f
demo: Fix compiler warning, cosmetics.
2013-04-15 12:27:55 +02:00
1d16675769
lascar-el-usb: Use two probes for temp/humidity loggers
2013-04-15 01:30:24 +02:00
2150a69b76
demo: Unref the IO channel when it is no longer used
2013-04-14 23:39:15 +02:00
ed20a42803
demo: Free dev_contexts
2013-04-14 23:39:15 +02:00
a76842947f
demo: Moved demo configuration variables into dev_context
2013-04-14 23:39:15 +02:00
33ef757383
demo: Keep a pointer to dev_context in sr_dev_inst and vice-versa
2013-04-14 23:39:15 +02:00
e053204700
demo: Only one GIOChannel is needed
2013-04-14 23:39:15 +02:00
bbd7ef0f18
demo: Fixed glitching in increment signal
2013-04-14 23:39:15 +02:00
f0b6ae19a8
alsa: Set the probe index
2013-04-14 23:39:15 +02:00
9e5670d0ab
zeroplus-logic-cube: add USB ID for LAP-16128U
2013-04-14 17:06:57 +02:00
6bb192bc05
rigol-ds1xx2: support digital channels.
2013-04-14 16:57:02 +02:00
a789b61087
rigol-ds1xx2: doesn't actually support SR_CONF_LIMIT_SAMPLES
2013-04-14 16:57:01 +02:00
ee7e9bee5d
rigol-ds1xx2: fix handling of partial frames.
2013-04-14 16:57:01 +02:00
0c05591abf
ols: Support get/set/list on all device options
...
Where it makes sense: _LOGIC_ANALYZER and _TRIGGER_TYPE don't have much
use for all of them.
2013-04-14 00:36:05 +02:00
8f35be72b4
rigol-ds1xx2: Use g_usleep() for portability
2013-04-12 19:42:44 +02:00
169dbe8577
rigol-ds1xx2: Whitespace, minor fix.
...
Return SR_ERR_MALLOC for failed malloc, not SR_ERR.
2013-04-12 18:44:28 +02:00
ff08a52a0f
Fix two minor compiler warnings.
2013-04-12 17:45:01 +02:00
254dd102e8
rigol-ds1xx2: Support for all channels, proper defaults
...
Since this driver supports devices with a control panel and display,
we take the defaults from the device -- not a set of sensible
defaults as usual.
2013-04-11 18:32:08 +02:00
88e429c97f
rigol-ds1xx2: fix channel numbers
...
Copyright bump, too.
2013-04-11 18:32:08 +02:00
a3df166f02
rigol-ds1xx2: better debugging
2013-04-11 18:32:08 +02:00
75d8a4e576
rigol-ds1xx2: properly send frame begin/end packets
2013-04-11 18:32:08 +02:00
7991784841
hantek-dso: Support SR_CONF_NUM_TIMEBASE/SR_CONF_NUM_VDIV
2013-04-11 18:32:08 +02:00
d62d7ad151
rigol-ds1xx2: Support SR_CONF_NUM_TIMEBASE/SR_CONF_NUM_VDIV
2013-04-11 18:32:08 +02:00
861c447bfb
rigol-ds1xx2: SR_CONF_TIMEBASE and _VDIVS lists are now an array of tuples
2013-04-11 18:32:08 +02:00
3973ee26f5
hantek-dso: SR_CONF_TIMEBASE and _VDIVS lists are now an array of tuples
2013-04-11 18:32:08 +02:00
034accb512
hantek-dso: move buffer sizes to device context
...
There are only two sizes for every device: 10k and the complete
per-channel buffer size. This can be doubled if one channel is disabled.
2013-04-11 18:32:08 +02:00
fe9ac25250
ols: Get rid of gcc warnings
2013-04-11 18:32:08 +02:00
1bec72d2ac
chronovu-la8: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
afdf6d6a20
tondaj-sl-814: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
7d93a62ea3
uni-t-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
ede25f4e6f
serial-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
f6a0ac9f62
rigol-ds1xx2: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
2c2be40189
mic-985xx: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
a9ed6877f7
link-mso19: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
510b3e692a
brymen-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
2c9c0df86e
asix-sigma: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
aa0dbd683c
alsa: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
3316e149d0
zeroplus-logic-cube: fix samplerate setting
2013-04-11 18:32:07 +02:00
8386096f01
zeroplus-logic-cube: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
c8733a2bbb
nexus-osciprime: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
e44ac12a29
agilent-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
a59b4eef55
victor-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
70424328c1
fluke-dmm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
dccda194db
colead-slm: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
7faf69da10
lascar-el-usb: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:07 +02:00
d40073113b
hantek-dso: Small debug fix
2013-04-11 18:32:07 +02:00
86bb3f4a86
hantek-dso: deprecate struct sr_rational
2013-04-11 18:32:07 +02:00
d00088ca6d
demo: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
f627afd65b
hantek-dso: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
aeea057220
ols: allow for disabling of RLE as well
2013-04-11 18:32:06 +02:00
e46aa4f611
ols: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
d6836bf129
fx2lafw: Adjust to GVariant-based sr_config_* functions
2013-04-11 18:32:06 +02:00
13d8e03c4f
Bump copyright year
2013-04-11 18:32:06 +02:00
3fd1d0ee1c
configure.ac: Improve USB/EZUSB/serial checks.
...
- If libusb-1.0 is not found, do not compile in ezusb.c and usb.c since
they require libusb.h. The respective hardware drivers that use
libusb-1.0, and usb.c and/or ezusb.c will be excluded from the build
elsewhere in configure.ac. Rename NEED_EZUSB to NEED_USB.
- Drop the NEED_SERIAL check and always compile in serial.c. This is a
very small chunk of code, it does not depend on any external
libraries that might be missing, and it compiles on all architectures.
Thus there's no need to conditionally include or exclude it.
2013-04-09 17:49:13 +02:00
3f98bf7017
Fix kernel driver attached check
...
The check is really only broken on darwin, but useful on all other
platforms, even if only Linux can actually detach a driver.
2013-04-07 14:14:16 +02:00
8c971b6e5c
hantek-dso: cosmetics
2013-04-07 14:01:03 +02:00
7b78b2f78f
hantek-dso: use per-device firmware filenames
2013-04-02 14:20:29 +02:00
3ebce226a2
s/sr_config_make/sr_config_new/.
...
This matches the naming of other/similar functions better.
2013-03-23 14:16:00 +01:00
333bf022e3
rigol-ds1xx2: Use ARRAY_SIZE.
2013-03-23 14:14:58 +01:00
3864648bb6
serial-dmm: Add support for RadioShack 22-805
...
Protocol-wise, this is identical to the 22-168, except that it communicates at
600 baud instead of 1200 baud.
2013-03-20 20:36:56 -05:00
cc840ab618
serial.c: FreeBSD and OpenBSD don't have OFILL either.
2013-03-17 15:07:50 +01:00
8e77bc20b9
lascar-el-usb: push samplerate before data log
2013-03-16 21:52:02 +01:00
361d15110c
lascar-el-usb: support for SR_CONF_DATALOG
2013-03-11 16:37:02 +01:00
9857276261
ols: use ptr to int dereference for SR_T_BOOL
...
This mad ptr to int casting has to go.
2013-03-11 16:37:02 +01:00
2474d87e8c
demo: sync get/set options
2013-03-03 21:21:08 +01:00
365f04d61f
mso-19: Initial analog probe support (unfinished).
...
- Added the analog probe (unfinished).
- Reset trigger to state to 0 before capture, just incase the scope is in
the middle of a capture.
2013-03-03 17:59:06 +01:00
5952553f56
mso-19: Fixed warning.
2013-03-03 17:58:46 +01:00
ff17e6ba50
mic985xx: Add missing memset().
2013-02-11 18:23:17 +01:00
6f3e5335ad
mic-985xx: Add support for the MIC 98581.
...
This device only supports temperature measurements, no humidity.
2013-02-11 16:53:28 +01:00
Bert Vermeulen
Uwe Hermann
Florian Knodt
Marc Schink
Florian Steinhardt
Martin Ling
Joel Holdsworth
Jan Luebbe
Alexandru Gagniuc
lelazary