97554432e8
split output_text into more manageable pieces
2011-01-22 04:35:02 +01:00
921a4c741f
fix copynpaste glitch
2011-01-22 01:01:53 -02:00
6ed4f04437
initial version of alsa plugin.
...
It does NOT work yet.
2011-01-22 00:57:27 -02:00
cfd8b10a2e
alphabetical order
2011-01-21 22:02:32 -02:00
5819184b22
Remove duplicate FIRMWARE_DIR includes.
...
We use AC_DEFINE_UNQUOTED in configure.ac now to put the FIRMWARE_DIR #define
in the config.h file, which is included where we need the #define.
2011-01-21 21:14:37 +01:00
62eeeb171b
re-enable filter and datastore for DF_LOGIC
...
This definitely isn't the proper fix, but it should allow DF_LOGIC
and DF_ANALOG to coexist.
2011-01-21 18:04:09 -02:00
81bbdf6a6a
add incomplete DF_ANALOG support to output_gnuplot.c
...
RAW->Voltage conversion is not implemented yet, its hardcoded for
signed 16bit conversion.
2011-01-21 16:11:44 -02:00
8038e90aef
add a sine wave to demo.c
2011-01-21 12:52:12 -02:00
c3579621d5
reduce analog_sample sizes.
...
To save resources, reduce the max ADC resolution and max probes
per device. Just increase when needed.
Soft limit: 256 probes, 16bit adc
Hard limit: 2^64 probes, 64 bit adc
2011-01-21 11:25:50 -02:00
764f887f7b
change demo.c to output analog packets
...
You need to #define DEMO_ANALOG to generate DF_ANALOG packets.
2011-01-21 02:12:48 -02:00
6eb0e3ea95
change output_text.c to support analog
...
Only the "bits" output format was converted.
Analog values, are scaled down to A-Z letters.
2011-01-21 02:12:48 -02:00
48d783e4b5
introduce analog_sample datafeed packet
...
These structs define the packet format used to exchange data using
the DF_ANALOG packet type.
2011-01-21 02:12:48 -02:00
f3163a6c2e
make output_analog.c = output_text.c
2011-01-21 02:12:48 -02:00
f95fd1aaf3
Install an empty firmware/ directory.
...
This reduces the hassle for the users (and distro packages) a bit, you
only need to copy files into there now.
2011-01-20 23:23:06 +01:00
a00b530c64
lib headers: Add 'extern "C"' for C++ usage.
2011-01-20 23:00:59 +01:00
bffed4fc10
Re-enable stuff we temporarily disabled for 0.1.
2011-01-20 00:43:57 +01:00
07c81bfad1
Disable Link Instruments MSO-19 for 0.1.
2011-01-19 23:55:03 +01:00
26ce0bbfd8
demo: Small indentation fix.
2011-01-19 23:47:21 +01:00
1924f59f4b
Demo: Obery samplerate and fix race condition.
2011-01-19 23:14:17 +01:00
576790ff7b
disable MSO-19 specific stuff for 0.1 release
2011-01-19 22:58:09 +01:00
c70fce6ba6
Don't install libs and headers in the 0.1 release.
...
The library APIs are not yet usable or finalized, so don't expose the
libs for now. Instead, only install sigrok-cli, the manpages, and
the decoders.
2011-01-19 19:20:44 +01:00
058b70353d
Move more non-public headers to sigrok-internal.h.
2011-01-19 01:16:19 +01:00
01bd1ed396
Fix compiler warning.
2011-01-19 00:46:54 +01:00
32c0551ba6
output_vcd: Make timestamp work on 32-bit machine.
2011-01-18 23:17:55 +01:00
94ba4bd689
Sigma: Update set_configuration to reflect API.
2011-01-18 23:12:57 +01:00
7c70c53843
Sigma: Set default samplerate to 200 KHz.
2011-01-18 22:39:46 +01:00
5b5ea7c6d2
Sigma: Only send trigger packet if enabled.
...
The Sigma hardware emits a default trigger event.
2011-01-18 22:24:23 +01:00
abda62ced8
Sigma: Never send empty packets.
2011-01-18 22:17:43 +01:00
afa8f8449a
output_text: Mark trigger at correct position.
...
ASCII output does not separate groups of samples with
and must be handled separately.
2011-01-18 22:14:36 +01:00
6ef7a8cb5d
output_text: Fix ASCII edge case.
2011-01-18 22:13:50 +01:00
d4f228d094
output_text: Add ASCII output.
2011-01-17 22:56:14 +01:00
b9cc36296b
demo driver: support time limit
2011-01-17 02:20:52 +01:00
574ce4988a
refuse to set sample limit under 4 (protocol can't handle it)
...
also a bit of whitespace mangling.
2011-01-17 02:18:02 +01:00
b33e7d7058
output_vcd: Emit timestamps as time, not sample num.
2011-01-16 17:55:51 +01:00
08b488b848
output_vcd: Remember samples between packets.
...
Fixes two bugs in vcd output:
1) Waveform did not match original input when viewed in gtkwave.
2) No vcd output when using 1 MHz sampling on Sigma.
2011-01-16 17:34:49 +01:00
88c51afe87
Sigma: Support for decoding partial chunks.
...
Samples are stored in chunks and the last samples do not fill up
a complete chunk. This patch adds support for decoding partial
chunks.
2011-01-16 17:05:14 +01:00
10c471ab13
Fix warnings.
2011-01-16 14:18:26 +01:00
d35aaf0256
demo: Use GIOChannels, makes it work on MinGW.
2011-01-16 14:12:52 +01:00
fbf1ff5d22
clean up output_vcd module
...
use self-expanding strings, better standards conformance
2011-01-16 04:34:45 +01:00
98b8cbc17e
Sigma: Limit number of edge triggers to 1.
...
Actually, Sigma supports 2 rising/falling triggers,
but they are ORed and the current trigger syntax
does not permit ORed triggers.
2011-01-15 20:01:00 +01:00
31facdd3c5
Sigma: Download samples from partial chunks.
2011-01-15 19:20:31 +01:00
ab224f7b61
Initial support for the OLS output format.
...
This is the file format for the OpenBench Logic Sniffer "Alternative" client.
Details: https://github.com/jawi/ols/wiki/OLS-data-file-format
This is work-in-progress.
Currently the number of samples is hardcoded to 10000. Also, this will
require a real logic analyzer as input at the moment, and will not yet
work with the "demo" driver.
2011-01-15 19:05:14 +01:00
9d7ab9ba3b
output_text: Allocate more memory for output
...
The trigger line was forgotten. Allocate 512 bytes extra.
2011-01-15 18:24:01 +01:00
9996570987
Sigma: Move sigma state to device specific struct
...
Thanks to Daniel Ribeiro for contributing this patch. Some
modifications were done.
Not tested on multiple Sigmas, because of lack of hardware.
2011-01-15 17:04:21 +01:00
3aa403e858
output_text: Allocate enough memory for output
2011-01-15 16:12:12 +01:00
858fb11c5e
Drop unused debug.c.
...
Even if we'd use it, it probably belongs into the frontend, not libsigrok.
2011-01-15 15:57:54 +01:00
484760d1a8
Cosmetics.
2011-01-15 15:57:54 +01:00
aa0b6b208e
sigrok-proto.h: Sort the prototypes, fix comments.
2011-01-15 15:57:54 +01:00
1483577eed
Start moving private stuff to sigrok-internal.h.
...
This is work-in-progress, unfinished.
2011-01-15 15:57:54 +01:00
f7606f9b75
fix hex output
2011-01-15 15:25:08 +01:00
Bert Vermeulen
Daniel Ribeiro
Uwe Hermann
Håvard Espeland
Bert Vermeulen
Håvard Espeland