99c76642aa
sysclk-lwla: Advertise SR_CONF_CONN option.
2014-01-23 02:36:13 +01:00
4472867a9f
rigol-ds: Don't run rigol_ds_block_wait() code unless supported.
2014-01-23 01:42:34 +01:00
aff00e4088
rigol-ds: Fix partial read handling in header parser.
2014-01-23 01:42:34 +01:00
8943049cd4
scpi_serial: Reimplement to allow scpi_read_complete() to work correctly.
2014-01-23 01:42:34 +01:00
824eb2acfd
rigol-ds: Fix divide by zero when no analog probes selected.
2014-01-23 01:42:34 +01:00
7d63347e90
rigol-ds: Stop capture cleanly on read errors.
2014-01-23 01:42:33 +01:00
ae3a191366
rigol-ds: Improve protocol debugging output, abort on read errors.
2014-01-23 01:42:33 +01:00
2b399703d1
rigol-ds: Only protocol v3 adds trailing linefeeds to data blocks.
2014-01-23 01:42:33 +01:00
a849c43a50
scpi_usbtmc: Improve debugging output.
2014-01-23 01:42:33 +01:00
569d4dbd3e
rigol-ds: Overhaul vendor/series/model info and protocol variants.
2014-01-23 01:42:33 +01:00
e086b750fa
rigol-ds: Overhaul VS5000 and DS1000 support.
...
This change moves the handling of series differences out to the points in the
code where they actually matter, unifying the overall structure of the code.
It also adds new VS5000/DS1000 series equivalents for commands that were
previously only implemented on the later models.
After this change, trigger waiting and the 'Memory' data source are supported
on the VS5000/DS1000 series.
2014-01-23 01:42:33 +01:00
38354d9d9e
rigol-ds: Use common rigol_ds_config_set() function throughout.
2014-01-23 01:42:33 +01:00
cf9f4bc5b0
scpi: Log responses received by sr_scpi_get_string().
2014-01-23 01:42:33 +01:00
32f09bfd9e
ols: Don't reduce sample count just because it's not a multiple of 4.
2014-01-23 01:09:16 +01:00
2b36d6c64e
demo: Cycle through all available patterns for default analog probes.
2014-01-21 18:25:50 +01:00
03aa381efb
demo: Probe indexes should be unique, even if the types are different.
2014-01-21 18:19:57 +01:00
22c196883d
rigol-ds: Disable key lock when closing device.
2014-01-21 17:52:23 +01:00
933e63a13b
brymen-dmm: Make protocol parser locale-independent.
2014-01-21 17:02:27 +01:00
fe9d5abefc
agilent-dmm: Make protocol parser locale-independent.
2014-01-21 16:43:49 +01:00
357e341d9a
fluke-dmm: Make protocol parsers locale-independent.
2014-01-21 16:33:34 +01:00
10d309c8ab
rigol-ds: DS1000 series still needs the stupid delay.
2014-01-21 13:10:29 +01:00
8dd0b290eb
rigol-ds: On DS1000 with firmware < 0.2.4, use legacy protocol.
...
Apparently the ASCII header containing length was only added in version
0.2.4.
2014-01-21 13:05:06 +01:00
fcdebbe89c
rigol-ds: Shorten vendor name.
2014-01-20 19:08:10 +01:00
67d6f6fca2
agilent-dmm: Shorten vendor name.
2014-01-20 19:07:48 +01:00
6d16fdfb13
ols: Add option to turn test patterns off again.
2014-01-20 18:16:25 +01:00
2b0e4a468a
rigol-ds: add support for more keys in config_get()
2014-01-20 00:34:57 +00:00
72ecba02f4
rigol-ds: use appropriately defined NUM_VDIV constant
2014-01-20 00:34:57 +00:00
8e06edf528
rigol-ds: add more valid timebases for DS2302
2014-01-20 00:34:57 +00:00
889ef4a01c
rigol-ds: fix set_cfg() calls with float parameters to avoid locale issues
2014-01-20 00:34:56 +00:00
f76c24f6fd
rigol-ds: Send FRAME_BEGIN and FRAME_END per frame, not per channel.
2014-01-20 00:24:57 +00:00
bac11aeb1b
rigol-ds: Cleanup and fix check for short data blocks.
2014-01-20 00:24:57 +00:00
51bfe5363a
rigol-ds: Use *OPC? command rather than delay to await completion.
2014-01-20 00:24:57 +00:00
7788579e66
scpi: Remove redundant newline removal in sr_scpi_get_hw_id().
2014-01-20 00:24:57 +00:00
334fbc2ac0
rigol-ds: Use standard sr_scpi_get functions, remove internal versions.
2014-01-20 00:24:57 +00:00
d03dfac6b9
scpi: Strip trailing newlines in sr_scpi_get_string().
2014-01-20 00:24:57 +00:00
470140fc0d
rigol-ds: DS1000 series actually use IEEE488.2 data block format.
2014-01-20 00:24:57 +00:00
d22250a96a
rigol-ds: Correct digital waveform block sizes.
2014-01-20 00:24:14 +00:00
3ed7a40c75
rigol-ds: Check SCPI read is complete after reading expected block length.
2014-01-20 00:24:14 +00:00
904fd29b72
rigol-ds: Update which channels are enabled after making changes.
2014-01-20 00:24:14 +00:00
f0de2dd0fa
Remove SR_CONF_MAX_UNCOMPRESSED_SAMPLES again.
...
The maximum sample size that can be set on a device is now published
by sr_config_list(SR_CONF_LIMIT_SAMPLES). This returns a tuple of
uint64_t representing minimum and maximum number of samples.
2014-01-19 17:18:59 +01:00
9497f49ef8
sysclk-lwla: Improve message log output.
...
Report settings at acquisition start as informational messages.
Print a message when the the trigger condition has been met.
Demote some other messages from information to debug, and use
the %zu format for printing size_t values.
2014-01-18 19:09:56 +01:00
2cfd16a316
sysclk-lwla: Streamline packet output logic.
...
(process_sample_data): When expanding run-length samples into
session packets, calculate the number of samples to write in
advance while honoring all constraints. This is cleaner than
checking constraints within the expansion loop. Also, the new
logic always fills up packets exactly to whatever limit applies
first, thereby removing the need for truncation after the fact.
2014-01-18 17:36:23 +01:00
29d587670d
sysclk-lwla: Implement SR_CONF_LIMIT_MSEC.
...
Allow the acquisition to be constrained by time in addition to
a sample count limit. Since the LWLA protocol actually provides
only a duration natively, implement the sample count limit on top
of the new duration limit.
With this change, limiting an acquisition in external clock mode
should finally work properly.
2014-01-18 16:08:39 +01:00
2438b737ae
demo: Bring analog square wave amplitude into line with other patterns.
2014-01-17 14:36:00 +01:00
9f54e0e84f
demo: Add analog sawtooth pattern.
2014-01-17 14:30:28 +01:00
091c962127
demo: Add triangle pattern.
2014-01-17 14:30:28 +01:00
4374219bc8
demo: Implement sine wave pattern.
...
This adds sine wave generation capabilities for the analog channels in the demo
driver. The frequency of the sine wave depends on the configured sample rate of
the demo device. The frequency of the sine wave is always 20 times smaller than
the sample rate, in other words we always have 20 samples per period.
2014-01-17 14:30:28 +01:00
e196cb6193
uni-t-ut32x: Fix typo that prevents usage with multiple devices.
2014-01-17 12:11:52 +01:00
c2b394d562
rigol-ds: Minor whitespace fixes.
2014-01-17 02:03:09 +01:00
04e8e01ec6
rigol-ds: Enable/disable LA pod when (de)selecting digital channels.
2014-01-17 01:52:29 +01:00
Daniel Elstner
Martin Ling
Bert Vermeulen
Aurelien Jacobs
poljar (Damir Jelić)
Uwe Hermann