The Chroma 62000P series comes in various models with different
current and voltage capabilities. These are encoded in the *IDN
string, so just get them from there, rather than needing a profile
for every model.
All those options are currently applied only to power-supplies
but they could apply as well to electronic loads, except for the
fact that electronic loads channels are called inputs and not
outputs.
Also when you think about an SMU (or any kind of 4-quadrants
power-supply), their channels can both source and sink current,
so they can be considered as input as much as output.
Those SR_CONF_* are thus renamed so that they can be used in all
those situations.
For devices such as the HP 6632B the following invocation was failing due to
scpi_cmd(sdi, SCPI_CMD_SELECT_CHANNEL, ...) returning SR_OK_CONTINUE.
./sigrok-cli -d scpi-pps:conn=/dev/ttyUSB0:serialcomm=9600/8n1 --continuous
sr: session: sr_session_start: could not start an acquisition (not enough data to decide error status yet)
Failed to start session.
This patch only adds the needed infrastructure to control output
frequency in the same manner as output voltage or current limit. This
does require a new field in the channel_spec struct, for the sake of
symmetry.
This makes 'output_frequency' symmetrical with 'output_current' and
'output_voltage'. On a more fundamental level, there's no reason why
frequency should be treated as a discrete quantity, other than
"es51919 used it this way".
Only the capabilities which map directly to SCPI commands supported by
sigrok are implemented at this time. This is sufficient to control
the most often used functionality of this AC source
Some devices with more than one microcontroller report the firmware
version for each of them, giving us more than four tokens. When that
happens, sigrok aborts, even though it received a valid response.
This happens, for example with the Chroma 61604:
'Chroma ATE,61604,001060,1.25,1.34,1.20'
With gcc 5.1 released and defaulting to std=gnu11, the code will be compiled
according to different standards depending on the compiler version so we
should better specify explicitly what standard we are targetting.
C11 is now quite mature, it is supported in the just release Debian stable
(gcc 4.9) and also in old-stable (gcc 4.7), so there should be no reason to
use anything more ancient.
We also should have no reason to need any non-standard GNU extension.
So using only C11 + POSIX sounds like the best option right now.
isascii() is a superset of isalpha() and isblank() so the current
code doesn't really make sense.
Moreover, isascii(x) is just a funky and non standard way to
write x < 128.
../src/backend.c: In function 'sr_init':
../src/backend.c:435:1: warning: label 'done' defined but not used [-Wunused-label]
done:
^
../src/device.c: In function 'sr_dev_inst_connid_get':
../src/device.c:525:7: warning: unused variable 'connection_id' [-Wunused-variable]
char connection_id[64];
^
../src/device.c:524:20: warning: unused variable 'b' [-Wunused-variable]
int r, cnt, i, a, b;
^
../src/device.c:524:17: warning: unused variable 'a' [-Wunused-variable]
int r, cnt, i, a, b;
^
../src/device.c:524:14: warning: unused variable 'i' [-Wunused-variable]
int r, cnt, i, a, b;
^
../src/device.c:524:9: warning: unused variable 'cnt' [-Wunused-variable]
int r, cnt, i, a, b;
^
../src/device.c:524:6: warning: unused variable 'r' [-Wunused-variable]
int r, cnt, i, a, b;
^
../src/device.c:523:22: warning: unused variable 'drvc' [-Wunused-variable]
struct drv_context *drvc;
^
Check the return value of sr_gpio_setval_export() in bl_acme_set_power_off()
and return an appropriate error if the call fails.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
This reverts commit 4cd97e5ad7.
We should actually check the return value of sr_gpio_setval_export().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add LIBUSB_CALL where needed to avoid warnings such as the following:
In file included from src/hardware/hantek-dso/api.c:34:0:
src/hardware/hantek-dso/dso.h:212:13:
note: expected 'libusb_transfer_cb_fn' but argument is of type 'void (*)(struct libusb_transfer *)'
SR_PRIV int dso_get_channeldata(const struct sr_dev_inst *sdi,
^
src/input/wav.c:41:0: warning: "WAVE_FORMAT_PCM" redefined
#define WAVE_FORMAT_PCM 0x0001
^
In file included from [...]/include/windows.h:86:0,
from [...]/include/libusb-1.0/libusb.h:70,
from ./src/libsigrok-internal.h:31,
from src/input/wav.c:28:
[...]/include/mmsystem.h:482:0: note: this is the location of the previous definition
#define WAVE_FORMAT_PCM 1
^
CC src/hardware/baylibre-acme/protocol.lo
../src/hardware/baylibre-acme/protocol.c: In function 'bl_acme_set_power_off':
../src/hardware/baylibre-acme/protocol.c:417:6: warning: variable 'val' set but not used [-Wunused-but-set-variable]
int val;
^
Both ina2xx and tmp401 linux drivers used by baylibre-acme expose
the standard hwmon update_interval attribute, which affects the internal
update interval of the chip.
When setting samplerate for data acquisition try to modify this
attribute accordingly.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
PROBE_FACTOR and POWER_OFF options are advertised for all ACME probes
(channel groups) regardless of whether they actually have given capability.
Check these options in config_list() at runtime and only advertise them
for probes which support them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Alexandru Gagniuc
Jiří Pinkava
Uwe Hermann
Marcus Comstedt
Aurelien Jacobs
Martin Ling
Bartosz Golaszewski