bce75f947d
ols: Fix a serial port related issue on FreeBSD.
...
Add sp_drain() to ensure bytes have actually been transmitted
over the wire.
This fixes bug #414 .
2014-11-01 19:44:36 +01:00
7aebe22d10
Only sr_dev_inst_free() should free channel groups.
2014-11-01 13:20:00 +01:00
aab4b8cb70
fx2lafw: Fix wide (16bit) sampling case.
...
This fixes bug #373 .
2014-10-29 22:46:57 +01:00
e3594306a9
zeroplus-logic-cube: Add support for AKIP-9101.
...
Thanks to Nikita Nazarenko for the patch.
2014-10-29 13:26:57 +01:00
9c6a2913fd
Make sr_dev_inst_connid_get() available without libusb
2014-10-27 21:22:31 +01:00
933defaa03
hantek-dso: Fix driver/global/channel group config keys.
...
This was way behind and did not yet support channel groups.
2014-10-27 17:09:57 +01:00
6fad08e6ab
Change SR_CONF_FILTER key to a boolean type.
...
This was an ill-defined string before, now it's simply something
you turn on or off on a channel.
2014-10-27 17:09:57 +01:00
e7ba5a994b
asix-sigma: Publish driver options.
2014-10-27 17:09:47 +01:00
a258204e00
scpi-pps: Publish driver options.
2014-10-27 17:09:47 +01:00
390795c099
demo: Rearrange driver and device options.
2014-10-27 17:09:47 +01:00
d7125bfa1e
cem-dt-885x: Publish driver options.
2014-10-27 17:09:47 +01:00
d6fa8ace94
atten-pps3xxx: Publish driver options.
2014-10-27 17:09:47 +01:00
a700a3a4bf
More robust searching for config keys.
2014-10-27 17:09:27 +01:00
51b1b95edb
Add config info for device type and limit config keys.
2014-10-27 17:09:07 +01:00
8769478c07
Add support for the UNI-T UT71x series (aka Voltcraft VC-920/940/960).
...
Tested on the Voltcraft VC-920 and VC-940 (both UT-D02 and UT-D04
cables), but it should work for all devices in this series without
any changes.
2014-10-25 17:14:30 +02:00
626027df0f
Add UNI-T UT71x DMM parser.
2014-10-25 16:53:32 +02:00
ce48b174da
sr_dev_inst_connid_get() requires libusb.
2014-10-23 00:22:07 +02:00
cf49d66bc6
hantek-dso: Properly zero out MQ flags.
2014-10-22 22:19:41 +02:00
61b0292217
Accept subtype of expected GVariant values.
2014-10-22 22:18:52 +02:00
a42a39ac37
Export LCR meter 'auto' bits as config keys instead of mqflags.
...
The automatic selections of the measured quantity and equivalent circuit
model are more part of the configuration of the meter than attributes
of the measurement result. To reflect this, model them as config keys
instead of mqflags. This allows a driver that supports remote control to
implement 'set' method for them and has the additional benefit of saveing
two flag bits.
2014-10-21 12:23:20 +02:00
160691b900
input/csv: Skip header line.
2014-10-19 23:23:58 +02:00
c3eadb0760
scpi-pps: Add support for Fluke/Philips PM2800 series.
2014-10-18 23:21:37 +02:00
c1d56d2013
scpi-pps: Move non-standard data type processing to SCPI parser.
2014-10-18 23:21:37 +02:00
4a471029c2
scpi-pps: Add channel probe facility to scan.
...
If the number and specs of the device's channels are not static, i.e.
need to be probed, this facility is needed.
Initially this will be used for the Philips PM2800 series, where only
the model returned by *IDN? is needed. However this could also be used
to do actual discovery with vendor-specific SCPI commands.
2014-10-18 23:21:37 +02:00
99d090d8e5
Fix typos.
2014-10-18 23:21:37 +02:00
b1b1944e19
Free channel group private storage when clearing device instance.
2014-10-18 23:21:37 +02:00
c7c8994c20
Rename "SERIAL" -> "SERIES".
...
Use the more correct term "SERIES" for the corresponding equivalent
circuit model.
2014-10-17 12:13:51 +02:00
34d117afb4
Allow building libsigrok without libserialport.
...
Since the DER EE DE-5000 driver is currently the only user of
the es51919 module and it depends on the libserialport, compile
the module only if the DER EE DE-5000 driver is enabled. This
allows libsigrok to be built without libserialport again.
2014-10-17 12:13:50 +02:00
e8cbb22314
Auto-set sdi->connection_id for serial devices in the getter
2014-10-17 03:02:52 +02:00
d1314831e4
yokogawa-dlm: Populate sdi->serial_num and sdi->version
2014-10-17 03:02:52 +02:00
b3fccc851b
rigol-ds: Populate sdi->serial_num
2014-10-17 03:02:52 +02:00
b33db61c48
hameg-hmo: Populate sdi->serial_num
2014-10-17 03:02:52 +02:00
d08667c53b
scpi-pps: Populate sdi->serial_num and fix hw_info mem leak
2014-10-17 03:02:52 +02:00
b2c02b0747
scpi: Populate sdi->connection_id
2014-10-17 03:02:52 +02:00
0699ccdd92
sysclk-lwla: Let the sdi getter populate sdi->connection_id
...
This fixes bug #441 .
2014-10-17 03:02:52 +02:00
c962d07cba
ikalogic-scanalogic2: Let the sdi getter popuplage sdi->connection_id
...
This fixes bug #440 .
2014-10-17 03:02:52 +02:00
0157fdce99
Provide getters for sr_dev_inst member access
2014-10-17 03:02:52 +02:00
984e4b0db8
scpi-pps: Start acquisition on the first enabled channel.
2014-10-17 03:00:55 +02:00
624503ae90
scpi-pps: Optimize channel selection.
...
This avoids sending a channel selection command to the device if
the channel we're working on is already on the same underlying
output channel.
2014-10-17 03:00:05 +02:00
ee2860ee11
scpi-pps: Disable beeper during session.
...
At least the Rigol DP800 series trigger the beeper when changing
channels remotely. Which gets rather annoying when doing acquisition
on three channels as fast as you can.
2014-10-16 15:24:27 +02:00
bf48ccebee
scpi-pps: Properly clean up acquisition session.
2014-10-16 14:55:56 +02:00
60475cd788
scpi-pps: Use only standard SCPI for Rigol DP800 series.
2014-10-16 13:23:21 +02:00
ae431bc8d6
Fix short names for SR_CONF_OUTPUT_VOLTAGE_TARGET/_CURRENT_LIMIT.
2014-10-16 13:22:51 +02:00
d3a401c15b
bindings: Remove Device::description().
2014-10-15 13:44:44 +02:00
1411f7d8e9
bindings: Add Session::filename() and corresponding SWIG attribute.
2014-10-15 13:44:44 +02:00
73a1eb017b
bindings: Add accessor to obtain parent object.
2014-10-15 13:44:44 +02:00
f591826cc7
bindings: add SWIG attribute for Packet::type.
2014-10-15 13:44:44 +02:00
f36f7d0282
C++: Don't clear Session::_owned_devices() in Session::remove_devices().
...
Owned devices are freed only when the session is destroyed.
2014-10-15 13:44:25 +02:00
1de3ccede9
Track sdis created by sr_session_load(), and free in sr_session_destroy().
2014-10-15 13:44:25 +02:00
c0e3ba4b79
Correct description of sr_session.devs.
2014-10-15 13:44:25 +02:00
Uffe Jakobsen
Bert Vermeulen
Uwe Hermann
Soeren Apel
Janne Huttunen
Jens Steinhauser
Martin Ling