9d3ae01b37
rigol-ds: use the new scpi scan API
2014-02-07 18:53:04 +01:00
17bdda5868
scpi: add a struct drv_context parameter to scpi_dev_inst_new()
2014-02-07 18:53:04 +01:00
6e94eb4142
rigol-ds: apply :KEY:LOCK DISABLE only to DS1K
2014-02-07 18:53:04 +01:00
3918fbb0cf
rigol-ds: properly end WAIT_TRIGGER event handling
2014-02-07 18:53:04 +01:00
83dbd9f09c
rigol-ds: properly deal with dev_close() getting called multiple times
2014-02-07 18:53:04 +01:00
464d49360a
rigol-ds: Deal with dev_close() getting called multiple times.
2014-01-27 21:19:41 +01:00
ca9b9f4834
hwdriver: Change TRIGGER_SLOPE setting to string type.
...
Drivers interpreted the uint64 values to the SR_CONF_TRIGGER_SLOPE
configuration setting in different ways. In order to orthogonalize
the API, change the type of the setting to a string with the same
format as uses for logic probes.
2014-01-27 20:55:01 +01:00
fe0d9caa88
rigol-ds: Fix a couple of compile warnings.
2014-01-23 23:12:37 +01:00
4472867a9f
rigol-ds: Don't run rigol_ds_block_wait() code unless supported.
2014-01-23 01:42:34 +01:00
aff00e4088
rigol-ds: Fix partial read handling in header parser.
2014-01-23 01:42:34 +01:00
824eb2acfd
rigol-ds: Fix divide by zero when no analog probes selected.
2014-01-23 01:42:34 +01:00
7d63347e90
rigol-ds: Stop capture cleanly on read errors.
2014-01-23 01:42:33 +01:00
ae3a191366
rigol-ds: Improve protocol debugging output, abort on read errors.
2014-01-23 01:42:33 +01:00
2b399703d1
rigol-ds: Only protocol v3 adds trailing linefeeds to data blocks.
2014-01-23 01:42:33 +01:00
569d4dbd3e
rigol-ds: Overhaul vendor/series/model info and protocol variants.
2014-01-23 01:42:33 +01:00
e086b750fa
rigol-ds: Overhaul VS5000 and DS1000 support.
...
This change moves the handling of series differences out to the points in the
code where they actually matter, unifying the overall structure of the code.
It also adds new VS5000/DS1000 series equivalents for commands that were
previously only implemented on the later models.
After this change, trigger waiting and the 'Memory' data source are supported
on the VS5000/DS1000 series.
2014-01-23 01:42:33 +01:00
38354d9d9e
rigol-ds: Use common rigol_ds_config_set() function throughout.
2014-01-23 01:42:33 +01:00
22c196883d
rigol-ds: Disable key lock when closing device.
2014-01-21 17:52:23 +01:00
10d309c8ab
rigol-ds: DS1000 series still needs the stupid delay.
2014-01-21 13:10:29 +01:00
8dd0b290eb
rigol-ds: On DS1000 with firmware < 0.2.4, use legacy protocol.
...
Apparently the ASCII header containing length was only added in version
0.2.4.
2014-01-21 13:05:06 +01:00
fcdebbe89c
rigol-ds: Shorten vendor name.
2014-01-20 19:08:10 +01:00
2b0e4a468a
rigol-ds: add support for more keys in config_get()
2014-01-20 00:34:57 +00:00
72ecba02f4
rigol-ds: use appropriately defined NUM_VDIV constant
2014-01-20 00:34:57 +00:00
8e06edf528
rigol-ds: add more valid timebases for DS2302
2014-01-20 00:34:57 +00:00
889ef4a01c
rigol-ds: fix set_cfg() calls with float parameters to avoid locale issues
2014-01-20 00:34:56 +00:00
f76c24f6fd
rigol-ds: Send FRAME_BEGIN and FRAME_END per frame, not per channel.
2014-01-20 00:24:57 +00:00
bac11aeb1b
rigol-ds: Cleanup and fix check for short data blocks.
2014-01-20 00:24:57 +00:00
51bfe5363a
rigol-ds: Use *OPC? command rather than delay to await completion.
2014-01-20 00:24:57 +00:00
334fbc2ac0
rigol-ds: Use standard sr_scpi_get functions, remove internal versions.
2014-01-20 00:24:57 +00:00
470140fc0d
rigol-ds: DS1000 series actually use IEEE488.2 data block format.
2014-01-20 00:24:57 +00:00
d22250a96a
rigol-ds: Correct digital waveform block sizes.
2014-01-20 00:24:14 +00:00
3ed7a40c75
rigol-ds: Check SCPI read is complete after reading expected block length.
2014-01-20 00:24:14 +00:00
904fd29b72
rigol-ds: Update which channels are enabled after making changes.
2014-01-20 00:24:14 +00:00
c2b394d562
rigol-ds: Minor whitespace fixes.
2014-01-17 02:03:09 +01:00
04e8e01ec6
rigol-ds: Enable/disable LA pod when (de)selecting digital channels.
2014-01-17 01:52:29 +01:00
51b294cd01
rigol-ds: Reset num_frames to zero in dev_acquisition_start.
2014-01-17 01:52:29 +01:00
b751cf7a82
rigol-ds: Make sure to always send SR_DF_END at end of capture.
2014-01-17 01:52:29 +01:00
4914dd4b9a
rigol-ds: Calculate effective samplerate.
2014-01-17 01:52:29 +01:00
5415e60247
rigol-ds: Separate function to compute analog frame size.
2014-01-17 01:52:29 +01:00
c1bcb8cc63
rigol-ds: Advertise SR_CONF_LIMIT_FRAMES support.
2014-01-17 01:52:29 +01:00
969edf6306
rigol-ds: Fix check for probe group validity.
2014-01-17 01:52:29 +01:00
bfaf112b68
rigol-ds: Use correct digital channel numbers when fetching config.
2014-01-14 18:28:19 +00:00
d993d8d39d
rigol-ds: remove lonely break
2014-01-14 00:01:50 +01:00
a31b2ccbd8
rigol-ds: prevent config_list() to return empty g_variant
...
This fixes the following glib message:
$ ./sigrok-cli -d rigol-ds --show
[...]
g_variant_builder_end: assertion '!GVSB(builder)->uniform_item_types || GVSB(builder)->prev_item_type != NULL || g_variant_type_is_definite (GVSB(builder)->type)' failed
2014-01-14 00:01:50 +01:00
c3515cea44
scpi: factorize dev_inst_new calls out of individual drivers
2014-01-11 22:36:46 +01:00
d5876cfb4a
scpi: add VXI transport support
2014-01-11 22:36:09 +01:00
a53278de01
rigol-ds: fix waveform reception on DS2000 series
...
The ":WAV:DATA?" scpi command must be sent before calling
sr_scpi_read_begin().
2014-01-03 17:54:47 +01:00
036d378a62
rigol-ds: add a few more DS2000 models to the supported list
2014-01-03 17:54:47 +01:00
0709197deb
rigol-ds: Correct usage of NUM_TIMEBASE and NUM_VDIV config keys.
2013-12-29 13:22:32 +01:00
05c644ea08
Revise SCPI read API to allow backend-independent data handling.
2013-12-29 04:26:36 +01:00
Aurelien Jacobs
Bert Vermeulen
Daniel Elstner
Martin Ling
Uwe Hermann