5ddb0cc7d4
serial: Don't hardcode parity and stop bits on Windows.
2012-12-02 14:10:27 +01:00
5ae35c29a7
serial: Full baudrate support on Windows/MinGW.
2012-12-02 13:56:13 +01:00
39e5d79826
serial: RTS/DTR support on Windows/MinGW.
2012-12-02 13:41:49 +01:00
a54dd31e38
serial: Use OS-independent flags for serial port opening.
...
Add SERIAL_RDWR, SERIAL_RDONLY, and SERIAL_NONBLOCK (for now), which are
mapped to the respective OS-specific mechanism in serial_open().
2012-12-02 12:45:54 +01:00
0f84cda05d
serial: Fix Windows build.
2012-12-01 22:34:53 +01:00
c216d62307
demo: Properly stop acquisition after reaching our sample quota
...
The demo driver was using sr_session_source_add_channel() to add
a poll source, but was relying on sr_session_run_poll() to call
sr_session_source_remove(). This, coupled with the design of the
driver caused errors once the samples were collected.
The error stream was most likely related to failing to properly close
one of the channels.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-01 22:00:16 +01:00
49145a63c7
demo: Be more verbose about starting/stopping acquisition
...
This is the first step in fixing the demo driver: figuring out what is
being called and what is not _and_ have it show up in the logs.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-12-01 22:00:15 +01:00
71caaad46b
serial: allow for extra rts and dtr options in conn string
...
Options in addition to the usual "9600/8n1" syntax start with a
slash, and take the form of key=value, where different options are
also separated by slashes. For example:
"9600/8n1/rts=0/dtr=1"
This sets RTS low and DTR high.
2012-11-27 00:55:08 +01:00
700dcd5caa
serial: Initial code for setting DTR/RTS.
...
Currently disabled until option parsing is in place.
2012-11-26 17:01:15 +01:00
9047358761
radioshack-dmm: Be more verbose with packet checks
...
Add sr_spew() messages to state why the packet was found to be invalid.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-21 19:33:55 -06:00
2ecc5d432f
radioshack-dmm: Check for valid mode before calculating checksum
...
The packet mode byte is akin to a signature. If that is invalid, there's
no point in calculating the checksum, so check the mode first.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-21 19:30:26 -06:00
54be7c005e
radioshack-dmm: Improve serial detection
...
For device detection, use serial_stream_detect() instead of
serial_readline() + custom logic.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-21 19:19:58 -06:00
551c3d8ce3
serial.c: Sanitize serial_stream_detect
...
Print the timeout in miliseconds, not microseconds.
Only calculate elapsed time once oer loop.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-21 19:18:21 -06:00
ac913e5c35
Add Metex 14-byte ASCII protocol parser.
2012-11-17 22:27:54 +01:00
90165efe55
ols: if no serial port specified, this driver is not used.
2012-11-16 15:26:47 +01:00
766456be1c
Move serial_stream_detect() to serial.c.
2012-11-14 18:40:07 +01:00
4da1a800df
serial: Compile-fix for Windows/MinGW.
2012-11-14 18:20:13 +01:00
6bef68a7e1
tekpower-dmm: Cosmetics.
2012-11-14 18:13:56 +01:00
2546b05c80
tekpower-dmm: Improve serial detection.
...
Serial detection was using serial_readline, which stripped carriage
return from the packets. This made for a very unreliable detection
mechanism.
Switch to a timeout-based detection mechanism that parses the data
as it comes in. This also allows us to stop parsing once we found
our first valid packet.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-14 18:13:56 +01:00
bda8fc98b1
Drop obsolete genericdmm driver.
2012-11-14 15:26:11 +01:00
d35afa87c9
tekpower-dmm: use new serial API
2012-11-12 12:50:42 +01:00
401476daaf
radioshack-dmm: use new serial API
2012-11-12 12:41:10 +01:00
19ee7dff78
tondaj-sl-814: use new serial API
2012-11-12 03:00:32 +01:00
f306ca61f6
colead-slm: use new serial API
2012-11-12 02:54:10 +01:00
109a3ba413
agilent-dmm: use new serial API
2012-11-12 02:25:37 +01:00
58d03f034f
fluke-dmm: use new serial API
2012-11-12 02:25:17 +01:00
530f201eb8
ols: use new serial API
2012-11-12 02:24:47 +01:00
299bdb249e
serial: revamp internal API
...
The only thing to get passed around now is the struct sr_serial_dev_inst
pointer. This should make things more portable as well.
2012-11-12 00:27:17 +01:00
de6e0eca95
sigma/la8/demo: s/SR_PROBE_ANALOG/SR_PROBE_LOGIC/.
2012-11-11 19:40:14 +01:00
472bbb464b
alsa: Use message logging helpers.
2012-11-11 18:14:17 +01:00
64d33dc28e
All drivers: Drop unneeded comments.
2012-11-11 18:09:11 +01:00
fa7730623a
victor-dmm: Cosmetics.
2012-11-11 18:09:11 +01:00
5df7b20156
serial: avoid Cyrillic conversion specifiers
2012-11-11 03:27:51 +01:00
fe1c50fba6
ols: fix device discovery
2012-11-11 03:12:10 +01:00
a99e0d2a0c
ols: Do not randomly probe serial ports
...
ols driver used to probe a series of available serial ports obtained
by regexp matching of common serial port names.
There are a number of problems with this approach:
1. It will probe all serial devices, including devices that do not
like to be probed, potentially causing them to act up.
2. It will try to probe serial ports which may already be opened in
other applications for other purposes.
3. It assumes the naming of the serial ports is set in stone, and
creates an unnecessary OS-specific list.
4. It produces unnecessary debug output even when an OLS device is
not connected.
5. etc...
Do not implicitly probe serial ports. Only probe the port specified
by the frontend, if any; otherwise, just quit.
Also get rid of all functionality in serial.c which was designed
specifically for random probing.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-11 03:12:10 +01:00
56eb9f95ba
link-mso19: Use message logging helpers.
2012-11-10 19:42:37 +01:00
92bcedf6e8
demo: Use message logging helpers.
2012-11-10 19:42:37 +01:00
e98b7f1be0
hantek-dso: Use message logging helpers.
2012-11-10 19:42:37 +01:00
47f4f073e0
asix-sigma: Use message logging helpers.
2012-11-10 19:42:37 +01:00
936e27f197
radioshack-dmm: Use new file naming conventions.
2012-11-10 19:42:37 +01:00
4e172b8f8d
radioshack-dmm: Move some stuff out of .h file.
...
Most of the enums and #defines are not needed in multiple files, just
put them in the respective .c file where they're used.
2012-11-10 19:42:37 +01:00
ba6383f855
radioshack-dmm: Cosmetics, coding-style, cleanups.
...
Also, drop some uneeded code and simplify some parts.
2012-11-10 19:41:21 +01:00
302c4b5ab5
serial: Deduplicate log messages a bit.
2012-11-10 01:45:51 +01:00
c073af80f8
Add initial Tondaj SL-814 protocol handling.
2012-11-10 01:45:51 +01:00
aa2af32432
tondaj-sl-814: Initial driver skeleton.
2012-11-10 01:01:28 +01:00
63f7cb9791
agilent-dmm: use standard serial_readline()
2012-11-07 01:25:10 +01:00
318dd53c70
serial_readline() now terminates on and strips CR and/or LF
2012-11-07 01:24:23 +01:00
b87f8504dc
g_get_monotonic_time() takes a signed int64
2012-11-07 01:23:24 +01:00
74ac7d7f73
agilent-dmm: no need to specify a serialcomm scan parameter
...
It's always 9600/8n1 anyway.
2012-11-07 00:46:30 +01:00
33e8a3c525
chronovu-la8: not a bug if an unused driver gets asked to clean up
2012-11-07 00:39:46 +01:00
ff94568366
victor-dmm: add protocol decoder
2012-11-06 19:37:33 +01:00
642e9d623c
more deconstifying sr_dev_inst for dev_acquisition_stop()
2012-11-06 19:32:53 +01:00
7a36037546
victor-dmm: add basic USB driver skeleton
2012-11-06 15:16:22 +01:00
69b07d14db
allow for intermediate stage in stopping acquisition
...
In the case of USB drivers, a driver's dev_acquisition_stop() cannot
simply remove its fd sources from the session and close its devices:
a USB transfer might still be underway, and it needs to be finished
(and its memory freed) properly.
An sr_dev_inst->status value is added: SR_ST_STOPPING, which should
be set when the driver's dev_acquisition_stop() is called, and acts
as a marker for the USB event handler to wind up its operations.
In order for dev_acquisition_stop() to be able to set the sdi status,
however, it needs to be unconstified.
2012-11-06 15:16:22 +01:00
ac3898d2d0
victor-dmm: Initial driver skeleton.
2012-11-06 15:16:22 +01:00
0ab0cb942f
zeroplus-logic-cube: Fix samplerate and trigger
...
- Default to 1MHz.
The default sample rate is the lowest frequency (100Hz),
but it takes a very long time until 128K memory is full.
- Fix the 1MHz setting.
- Use samplerate list.
- Fix 10MHz frequency.
- Fix trigger.
- Change the size of memory according to the number of samples.
- Add pre-trigger (capture ratio) setting.
- Fix the first acquisition after power on.
2012-11-05 11:46:58 +01:00
41d9427f27
uni-t-dmm: Use new USB helper functions.
2012-11-03 00:03:01 +01:00
0c632d36be
genericdmm: Factor out USB functions.
...
Move sr_usb_connect() and sr_usb_open() to hardware/common/usb.c in a
slightly more generic form and add more error checks and logging.
Let genericdmm use the new/moved functions.
2012-11-03 00:02:56 +01:00
538ac9a91e
colead-slm: fix sloppy driver context handling
2012-11-02 20:44:34 +01:00
83e3c368c6
serial: Output successful open and the FD.
2012-11-02 18:49:00 +01:00
20af610683
serial: Fix two segfaults.
2012-11-02 18:45:37 +01:00
c485db908a
serial: Fix some sr_err() items.
2012-11-02 18:35:30 +01:00
43d8eaf601
genericdmm: Drop left-over entry.
2012-11-02 18:16:58 +01:00
441b80035e
genericdmm: Drop some dead code.
2012-11-02 18:05:18 +01:00
b19f4622b6
serial: More error-checking & logging, add baudrates.
...
This mostly affects the non-Windows code so far, the rest will follow.
2012-11-02 18:02:20 +01:00
d7c776b9ff
serial: Add missing "break"s.
...
This would otherwise cause bugs when e.g. asking for 2 stopbits.
2012-11-02 15:57:21 +01:00
a8d09e1326
colead-slm: SL-5868P support
2012-11-02 15:24:30 +01:00
4d729ddcaf
colead-slm: Initial driver skeleton.
2012-11-02 15:24:30 +01:00
8c1adf3738
Rework FS9721 parser.
...
Merge parts of the tekpower-dmm code (the chip of the TekPower
TP4000ZC seems to be an FS9721_LP3 too) and rework parts of the functions.
Adapt the tekpower-dmm and uni-t-dmm code accordingly.
2012-11-02 01:09:58 +01:00
be5c1d3b52
tekpower-dmm: Use generic fs9721 parser
...
Replace the parser with the fs9721 parser, which is just an adapted
version of this parser.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-11-02 00:50:56 +01:00
886a52b6fb
Return SR_ERR_MALLOC upon allocation errors.
...
Add some TODOs.
2012-10-30 20:25:54 +01:00
6f22a8ef2c
Factor out serial_readline() to serial.c.
...
Only one (slightly different) variant remains in agilent-dmm, this will
be merged soon too, though.
2012-10-30 19:59:21 +01:00
2980cc2494
genericdmm/victor-dmm: Use message logging helpers.
2012-10-30 19:43:46 +01:00
dccbd0ede0
radioshack-dmm: Use message logging helpers.
2012-10-30 19:43:45 +01:00
38d326e879
agilent-dmm: Use message logging helpers.
2012-10-30 19:35:35 +01:00
31d84da3a2
fluke-dmm: Use message logging helpers.
2012-10-30 19:28:37 +01:00
6ac5f8922e
uni-t-dmm: Simplify subdriver setup.
...
So far, it seems we can make this work with just hw_init() needing to
be subdriver-specific (it will point 'di' to the respective per-subdriver
entry), the rest of the API functions can then use a strcmp() on di->name to
learn which subdriver they belong to.
2012-10-30 14:23:05 +01:00
fdbcb86dba
Draft: Make UT61D and VC-820 "first-class" drivers.
...
The 'uni-t-dmm' driver/directory will not appear as a "driver" to
frontends anymore, it's just an internal thing.
The frontends will see a uni-t-ut61d and voltcraft-vc820 driver now,
with the correct names and parsers etc. attached to them.
This is not fully finished yet, but it's a start (and works mostly):
$ sigrok-cli -D
The following devices were found:
UNI-T UT61D with 1 probe: P1
Voltcraft VC-820 with 1 probe: P1
$ sigrok-cli --driver voltcraft-vc820 -D
The following devices were found:
Voltcraft VC-820 with 1 probe: P1
$ sigrok-cli --driver uni-t-ut61d -D
The following devices were found:
UNI-T UT61D with 1 probe: P1
# Now attaching a UNI-T UT61D device via USB.
$ sigrok-cli --driver uni-t-ut61d --samples 3 -O analog
P1: -0.017800 V DC
P1: -0.017600 V DC
P1: -0.017700 V DC
# Now attaching a Voltcraft VC-820 device via USB instead.
$ sigrok-cli --driver voltcraft-vc820 --samples 3 -O analog
P1: -0.319200 V DC
P1: -0.319300 V DC
P1: -0.319300 V DC
2012-10-30 13:11:27 +01:00
4ca378df88
don't use deprecated g_thread_init/_create
2012-10-29 22:10:05 +01:00
015f1508ad
uni-t-dmm: Voltcraft VC-820 draft support.
...
This is commented out so far, will be implemented properly soon.
2012-10-29 15:20:17 +01:00
6c701476ad
Add protocol parser for FS9721_LP3/FS9721B.
...
The Fortune Semiconductor FS9721_LP3 and FS9721B/Q100 DMM chips are very
similar and the protocol looks identical.
Tested on a Voltcraft VC-820 (FS9721_LP3) with the uni-t-dmm driver
(needs some small changes, tbd).
2012-10-29 15:17:17 +01:00
a28dac0a73
fluke-dmm: code cleanup
2012-10-29 11:54:20 +01:00
2c04dede20
Fluke 287/289: support for dBu/dBV measurement units
2012-10-29 11:50:34 +01:00
79081ec80c
Initial support for UNI-T DMMs.
...
This is not yet fully finished, but works for most use-cases.
Tested with a UNI-T UT61D using the UT-D04 USB/HID cable (new version).
2012-10-27 23:17:30 +02:00
45e080b60b
la8: Rename driver.[ch] to protocol.[ch].
2012-10-27 22:36:34 +02:00
f3a35908ef
la8: Adapt to new driver conventions.
2012-10-27 22:36:19 +02:00
bbabddbd64
tekpower-dmm: Cosmetics, coding-style, consistency fixes.
2012-10-27 22:25:04 +02:00
7dc55d930f
Add support for the TekPower TP4000ZC DMM.
...
Also known as Digitek DT4000ZC.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-27 22:25:04 +02:00
545f978639
config.h usage cleanups.
...
- Drop config.h #include from files that don't actually use any of
its contents (at the moment).
- Add comment for those that do need it.
2012-10-24 00:41:21 +02:00
589a10135a
clean up autoconf/autobuild scripts
2012-10-22 01:48:39 +02:00
7c41dc4774
radioshack-dmm: Implement support for "LOGIC" mode
...
LOGIC mode sends the following data:
V < 0 : actual voltage
0 <= V < 1 : LOW
1 <= V < 2 : actual voltage
2 <= V : HIGH
We follow the same idea, and set our unit to BOOLEAN for the crazy
case (HIGH or LOW).
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-20 23:03:51 +02:00
0f70830194
libsigrok: (Trivial) Add support for 2400 baud
...
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-20 23:02:14 +02:00
fe31f8b9f9
fluke-dmm: add support for Fluke 187
2012-10-16 23:33:54 +02:00
be8dbf3ab2
radioshack-dmm: (Trivial) Convenience fixes
...
While testing the new radioshack-dmm driver with pulseview, I found
a few inconvenients.
1. Print an info message when a port is probed, and when a device is
found. This makes it easy to tell if and where the driver is looking.
2. num_samples was not reset after the first aquisition, so the
second aquisition would quit right away. Reset num_samples at start
of a new aquisition.
3. There's no need to open the serial port RW, so change O_RDWR to
O_RDONLY when opening the port.
These changes are too trivial to split into different patches.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-16 11:16:41 +02:00
7b0a85c81c
radioshack-dmm: build fixes
2012-10-15 18:25:48 +02:00
d375b3c3ec
radioshack-dmm: Add support for Radioshack 22-812 DMM
...
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-15 17:32:58 +02:00
e8e9dcdd70
serial: (Trivial) add support for 4800 baud
...
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2012-10-15 17:32:58 +02:00
a2e222d24f
sr: struct drv_context is global now.
2012-09-27 23:29:33 +02:00
d38d2ef0ce
fluke-dmm: support for all basic 287 functionality
2012-09-25 19:53:05 +02:00
f46a36ad80
fluke-dmm: definitely use CR as line terminator
2012-09-25 19:53:05 +02:00
acd29accb3
fluke-dmm: add Fluke 287 to supported list
2012-09-25 19:53:05 +02:00
fb9d3bf9cc
sr: always turn off ICRNL on serial ports
...
It does rather screw with protocols that use CR.
2012-09-25 19:53:05 +02:00
d3f8f1415c
fluke-dmm: flesh out the driver API
2012-09-25 19:53:05 +02:00
4129832014
fluke-dmm: auto-discover serial bitrate if not provided
2012-09-25 19:53:05 +02:00
bc41e012e6
fluke-dmm: don't log anything if no conn params given
2012-09-25 19:53:05 +02:00
fb480d578e
fluke-dmm: fix discovery
2012-09-25 19:53:05 +02:00
5c51e09868
sr: turn off canonical mode and echo ion serial ports by default
2012-09-25 19:53:05 +02:00
e7edd64f45
fluke-dmm: build fixes
2012-09-25 19:53:05 +02:00
4f958423d1
fluke-dmm: basic scan functionality
2012-09-25 19:53:05 +02:00
883a2e9e71
fluke-dmm: initial driver skeleton
2012-09-25 19:53:05 +02:00
c2016fa0eb
agilent-dmm: don't log anything if no conn params given
2012-09-17 00:00:27 +02:00
e9022f596d
sr: make struct drv_context global
2012-09-11 21:27:26 +02:00
f5cfe894ec
fx2lafw: use default libusb context
2012-09-11 21:20:50 +02:00
19b0cce312
hantek-dso: use default libusb context
2012-09-11 21:16:16 +02:00
b186aa78b8
agilent-dmm: fix model identifiers
2012-09-10 21:27:50 +02:00
8c0152f29b
agilent-dmm: tentative support for all U123x and U125x models
...
Only tested on U1233A, but it just might work.
The U125x protocol decoding only supports voltage, current, resistance,
capacitance and diode measurements for now.
2012-09-10 01:00:48 +02:00
a4394fb3d9
agilent-dmm: code cleanup
...
This should make it easier to support other Agilent U12xx models
2012-09-10 00:13:26 +02:00
e066c32a25
agilent-dmm: fix AC/DC mode detection
2012-09-09 22:49:07 +02:00
f2e86bbfa6
agilent-dmm: make parser deal with input better
2012-09-09 22:48:22 +02:00
81599cc55b
agilent-dmm: remove IDN check at 1Hz, we just don't need it.
...
Some debug message cleanup.
2012-09-08 14:53:49 +02:00
e6b021f377
agilent-dmm: support for submodes
2012-09-08 03:06:45 +02:00
69a7402490
genericdmm/victor-70c: fix resistance and frequency measurements
2012-09-08 02:28:41 +02:00
c0d93341cb
generic-dmm: cosmetics
2012-09-02 15:42:56 +02:00
f6b8ffa6c0
genericdmm/victor-70c: warn if detaching kernel driver fails
2012-09-02 15:42:56 +02:00
e93cdf428c
sr: mostly finished Agilent DMM driver
2012-09-02 15:42:56 +02:00
792fc68658
serial: add serial_set_paramstr()
2012-09-02 15:42:56 +02:00
f38b9763fa
serial: fix flow control setting
2012-09-02 15:42:56 +02:00
6a6e23abf5
serial: set speed in both directions
2012-09-02 15:42:56 +02:00
6ac0db19f3
sr: add new agilent-dmm driver (Agilent U12xxA multimeters)
2012-09-02 15:42:56 +02:00
b84c13d700
genericdmm: Victor 70C multimeter support
2012-08-18 16:23:08 +02:00
3c6ce226de
genericdmm: finish basic USB support
2012-08-18 16:23:08 +02:00
811deee4af
sr/drivers: add API calls sr_dev_inst_list() and sr_dev_inst_clear()
...
These are used to list the device instances currently known to the driver,
and clear that list.
Drivers that don't necessarily clear their list of instances on every scan,
such as genericdmm, need to provide these to the frontend to keep instance
management sane.
2012-08-06 00:59:25 +02:00
014359e329
sr/drivers: obsolete SR_HWCAP_PROBECONFIG
...
Since probes now live in a struct sr_dev_inst owned by the driver, it
already knows about them. Instead of a frontend telling the driver to
configure probes, all driver now do this just before starting acquisition.
2012-08-05 18:56:12 +02:00
fabe59b326
sr: drivers using sr_usb_dev_inst_new() must free it properly as well
...
sr_usb_dev_inst_free() doesn't really do anything, but it might one
day.
2012-08-04 12:21:02 +02:00
228b2cccaf
asix-sigma: fix double free
2012-08-03 14:19:00 +02:00
8012ae1e3b
chronovu-la8: fix double free
2012-08-03 14:18:02 +02:00
afc8831938
chronovu-la8: code cleanup
2012-08-03 14:06:52 +02:00
7021f98596
chronovu-la8: remove session source when done
2012-08-03 11:29:01 +02:00
503c4afbb4
asix-sigma: remove session source when done
2012-08-03 11:29:01 +02:00
7fd3e85961
demo: remove sources from session when done
2012-08-03 11:29:01 +02:00
a3508e33f9
hantek-dso: remove sources from session when done
2012-08-03 11:29:01 +02:00
26bf9d56c0
ols: remove serial source from session when done
2012-08-03 11:29:01 +02:00
310e9e9be4
zeroplus: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
fefc4b858e
ols: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
301a5e4c4a
genericdmm: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
b4750a3a93
demo: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
b9636cf4dc
fx2lafw: minor cleanup
2012-08-03 11:29:00 +02:00
cf1ebd5446
chronovu-la8: don't try to clean up unless we've initialized
2012-08-03 11:29:00 +02:00
b32503cccd
asix-sigma: properly init driver-private storage
2012-08-03 11:29:00 +02:00
1644fb2473
chronovu-la8: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
0e1357e896
asix-sigma: use driver-private storage for instances
2012-08-03 11:29:00 +02:00
dc9dbe949a
fx2lafw: use driver-private storage for instances and libusb_context
2012-08-03 11:29:00 +02:00
269971ddce
hantek-dso: use driver-private storage for instances and libusb_context
2012-08-03 11:29:00 +02:00
6f57fd9694
sr: remove obsolete SR_DI_INST
2012-08-03 11:29:00 +02:00
87ca93c504
sr/drivers: add proper probe list to instances of all drivers
2012-08-03 11:29:00 +02:00
b35c829306
sr/drivers: fix off-by-one if frontend-initiated probe configuration
2012-08-03 11:29:00 +02:00
9e90dcba9c
sr/drivers: remove driver API call dev_status_get()
...
It's obsolete: no frontend ever used it, and neither did libsigrok.
The sdi->status field is only used internally by some drivers, and
should probably be moved to the driver-specific context structs.
2012-08-03 11:27:31 +02:00
5d9ed643e9
ols: change driver dev_acquisition_start/_stop calls to use sdi
...
...yeah, forgot OLS.
2012-08-03 11:27:31 +02:00
c4a1de59f8
genericdmm: cosmetic change
2012-08-03 11:27:31 +02:00
3f848bb7a9
zeroplus: comment out 32-probe models for now
2012-08-03 11:27:31 +02:00
428edbe13d
zeroplus-logic-cube: fix scan to correctly find model
2012-08-03 11:27:31 +02:00
3ffb6964a1
sr/drivers: change driver dev_acquisition_start/_stop calls to use sdi
2012-08-03 11:27:31 +02:00
25a0f108f4
sr/drivers: change driver dev_open/dev_close calls to use sdi
2012-08-03 11:27:31 +02:00
6f4b1868e8
sr/drivers: use sr_dev_inst instead of device index for dev_config_set()
...
All driver API calls using device index as a parameter will instead use a
const struct sr_dev_inst.
2012-08-03 10:27:39 +02:00
9c4311c524
chronovu-la8: adjust to multi-vid/pid patch
2012-08-03 10:27:39 +02:00
444adea232
zeroplus-logic-cube: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
2ca4465b3d
ols: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
2ce9f04629
hantek-dso: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
cbd798f400
fx2lafw: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
46c7a4daa7
demo: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
7566601c21
chronovu-la8: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
b2b5445c30
asix-sigma: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:39 +02:00
2efc5948b6
ols: scan fix
2012-08-03 10:27:39 +02:00
b0c8d7ac7f
hantek-dso: scan/info_get fixes
2012-08-03 10:27:39 +02:00
7dfcf010a0
demo: scan/info_get fixes
2012-08-03 10:27:39 +02:00
cfe8a84dd7
chronovu-la8: scan/info_get fixes
2012-08-03 10:27:39 +02:00
d7bbecfdb9
asix-sigma: scan/info_get fixes
2012-08-03 10:27:39 +02:00
626409abfb
zeroplus-logic-cube: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
dddfb3dbf0
ols: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
0b79bcbb9d
hantek-dso: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
dfb0fa1a66
demo: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
6a2761fd99
chronovu-la8: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
4147960558
asix-sigma: use new driver info_get() API call
2012-08-03 10:27:38 +02:00
eec944c5b8
asix-sigma: don't attempt to free static struct
...
Added more debugging as well.
2012-08-03 10:27:38 +02:00
067d07166b
demo: use new scan API
2012-08-03 10:27:38 +02:00
7da6f9d54a
zeroplus-logic-cube: init and scan fixes
...
libusb context needs to be initialized only once, not ever scan.
Every scan invalidates the last one, so clean up any previous run's
results first.
2012-08-03 10:27:38 +02:00
4ca3898445
zeroplus-logic-cube: use new scan API
2012-08-03 10:27:38 +02:00
39cfdd75f9
hantek-dso: use new scan API
2012-08-03 10:27:38 +02:00
0448d11097
asix-sigma: use new scan API + fixes
...
Now freeing FTDI context and driver-private context.
2012-08-03 10:27:38 +02:00
c4f3ed4bb0
chronovu-la8: use new scan API + fixes
...
Now freeing FTDI context and driver-private context.
2012-08-03 10:27:38 +02:00
f8c617cf4c
hantek-dso: instance list fix
2012-08-03 10:27:38 +02:00
10e5cbede8
ols: use new scan API
2012-08-03 10:27:38 +02:00
ed300b9f6a
asix-sigma: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
765ef2f725
chronovu-la8: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
dcf03d6dbd
demo: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
3275654708
zeroplus-logic-cube: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
982947f7a2
hantek-dso: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
e5e81856b4
ols: use driver struct-based device instance list
2012-08-03 10:27:38 +02:00
d6db79a48c
genericdmm: device scan fixes
2012-08-03 10:27:38 +02:00
f1a14ea7ab
genericdmm: don't use deprecated hwcap_get_all() driver API call
2012-08-03 10:27:37 +02:00
Uwe Hermann
Alexandru Gagniuc
Bert Vermeulen
Toshiaki Yoshida