6a4710fac2
drivers: Trim unused config_get() calls
...
None of the driver config_get/set/list calls are required.
2013-01-25 16:05:48 +01:00
0d485e30c6
Deprecate SR_DI_HWOPTS.
...
This is replaced by SR_CONF_SCAN_OPTIONS.
2013-01-25 15:09:20 +01:00
9a6517d14b
Deprecate SR_DI_HWCAPS.
...
This is replaced by SR_CONF_DEVICE_OPTIONS.
2013-01-25 15:01:49 +01:00
a1c743fc51
drivers: implement config_list()
2013-01-25 02:37:26 +01:00
035a1078fd
drivers: rename and reorganize config get/set
...
The driver API calls info_get() and dev_config_set() have been renamed
to config_get() and config_set(), respectively.
2013-01-24 19:19:09 +01:00
69e19dd769
Always interleave analog data with all enabled probes.
...
The new "probes" field in sr_datafeed_analog contains a copy
of all enabled struct sr_probe.
2013-01-23 03:40:44 +01:00
1953564a96
Rename SR_HWOPT_* and SR_HWCAP_* to SR_CONF_*
2013-01-21 23:32:50 +01:00
1987b8d63e
drivers: use new sr_config struct
...
Sending an SR_DF_META packet at the start of every stream is not
mandatory; the frontend should ask for what it needs, and any extra
information the driver wants to send will come in due time.
2013-01-21 23:32:49 +01:00
4ebd48b352
Remove non-error hw_info_get() messages.
...
Currently hw_info_get() can receive requests for entries (info_id) that
the specific driver doesn't support. That is (right now) a valid
use-case and not an error (might change later, though).
Thus, for now, don't output messages for such requests at all (certainly
not as sr_err() where they show up in e.g. sigrok-cli output per default).
2013-01-20 18:48:02 +01:00
6b8d6f93bb
Get rid of obsolete SR_DI_NUM_PROBES and SR_DI_PROBE_NAMES.
...
Frontends should use the probe list in the device's sr_dev_inst
to get this information.
2013-01-15 17:42:23 +01:00
2f1e5c7cb7
fluke-dmm: Properly handle continuous mode
...
Same bug+fix as commit d55c89f523
2012-12-24 20:27:45 +01:00
11fb7110f4
fluke-dmm: 190 series scopemeter support
...
199B only for now.
2012-12-24 11:22:01 +01:00
4cea0ff7fe
fluke-dmm: parser cleanup
2012-12-24 11:22:01 +01:00
9fa0968027
fluke-dmm: adapt scanner to accomodate 190 series scopemeters
2012-12-24 11:22:01 +01:00
d4b11de09a
fluke-dmm: make poll timeout configurable
...
Defaulted to 1s before, but a simple "QM" command on a 199B in scope
mode takes 1.7s to come through.
2012-12-24 11:22:01 +01:00
1ebe4b4e69
hw_init(): Save struct sr_context * parameter in struct drv_context
2012-12-03 12:07:40 +01:00
34f06b903e
Add a struct sr_context * parameter to hw_init()
2012-12-03 12:07:40 +01:00
a54dd31e38
serial: Use OS-independent flags for serial port opening.
...
Add SERIAL_RDWR, SERIAL_RDONLY, and SERIAL_NONBLOCK (for now), which are
mapped to the respective OS-specific mechanism in serial_open().
2012-12-02 12:45:54 +01:00
58d03f034f
fluke-dmm: use new serial API
2012-11-12 02:25:17 +01:00
64d33dc28e
All drivers: Drop unneeded comments.
2012-11-11 18:09:11 +01:00
642e9d623c
more deconstifying sr_dev_inst for dev_acquisition_stop()
2012-11-06 19:32:53 +01:00
69b07d14db
allow for intermediate stage in stopping acquisition
...
In the case of USB drivers, a driver's dev_acquisition_stop() cannot
simply remove its fd sources from the session and close its devices:
a USB transfer might still be underway, and it needs to be finished
(and its memory freed) properly.
An sr_dev_inst->status value is added: SR_ST_STOPPING, which should
be set when the driver's dev_acquisition_stop() is called, and acts
as a marker for the USB event handler to wind up its operations.
In order for dev_acquisition_stop() to be able to set the sdi status,
however, it needs to be unconstified.
2012-11-06 15:16:22 +01:00
886a52b6fb
Return SR_ERR_MALLOC upon allocation errors.
...
Add some TODOs.
2012-10-30 20:25:54 +01:00
6f22a8ef2c
Factor out serial_readline() to serial.c.
...
Only one (slightly different) variant remains in agilent-dmm, this will
be merged soon too, though.
2012-10-30 19:59:21 +01:00
31d84da3a2
fluke-dmm: Use message logging helpers.
2012-10-30 19:28:37 +01:00
a28dac0a73
fluke-dmm: code cleanup
2012-10-29 11:54:20 +01:00
2c04dede20
Fluke 287/289: support for dBu/dBV measurement units
2012-10-29 11:50:34 +01:00
545f978639
config.h usage cleanups.
...
- Drop config.h #include from files that don't actually use any of
its contents (at the moment).
- Add comment for those that do need it.
2012-10-24 00:41:21 +02:00
fe31f8b9f9
fluke-dmm: add support for Fluke 187
2012-10-16 23:33:54 +02:00
a2e222d24f
sr: struct drv_context is global now.
2012-09-27 23:29:33 +02:00
d38d2ef0ce
fluke-dmm: support for all basic 287 functionality
2012-09-25 19:53:05 +02:00
f46a36ad80
fluke-dmm: definitely use CR as line terminator
2012-09-25 19:53:05 +02:00
acd29accb3
fluke-dmm: add Fluke 287 to supported list
2012-09-25 19:53:05 +02:00
d3f8f1415c
fluke-dmm: flesh out the driver API
2012-09-25 19:53:05 +02:00
4129832014
fluke-dmm: auto-discover serial bitrate if not provided
2012-09-25 19:53:05 +02:00
bc41e012e6
fluke-dmm: don't log anything if no conn params given
2012-09-25 19:53:05 +02:00
fb480d578e
fluke-dmm: fix discovery
2012-09-25 19:53:05 +02:00
e7edd64f45
fluke-dmm: build fixes
2012-09-25 19:53:05 +02:00
4f958423d1
fluke-dmm: basic scan functionality
2012-09-25 19:53:05 +02:00
883a2e9e71
fluke-dmm: initial driver skeleton
2012-09-25 19:53:05 +02:00
Bert Vermeulen
Uwe Hermann
Peter Stuge