cea26f6e9f
cem-dt-885x: Support for retrieving stored samples
2013-06-20 14:35:34 +02:00
662172d4f4
cem-dt-885x: Support for SR_CONF_DATA_SOURCE
...
This device can do both live and memory-based acquisition.
2013-06-19 12:23:30 +02:00
6caeef6ee5
Add SR_CONF key for data source
2013-06-19 12:23:17 +02:00
4c22355f04
cem-dt-885x: Support for powering off the device
2013-06-17 16:17:39 +02:00
32de50b7f3
Add SR_CONF key for powering off a device
2013-06-17 16:17:39 +02:00
f157b2eebb
cem-dt-885x: Support for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
8417ebad12
Add SR_CONF key for sound pressure level measurement range
2013-06-17 16:17:39 +02:00
0cd9107dfb
cem-dt-885x: Fix datalog on/off setting in max/min hold mode
...
As it turns out, the device randomly decides to send no logging state
info when max hold or min hold mode is enabled.
2013-06-17 16:17:39 +02:00
a90e480cdc
cem-dt-885x: Support for max/min hold modes
2013-06-17 16:17:39 +02:00
9fd6bc2054
Add SR_CONF keys for max/min hold modes
2013-06-17 16:17:39 +02:00
1487ce4fbc
cem-dt-885x: Support for changing time weighting
2013-06-17 16:17:39 +02:00
be73391982
cem-dt-885x: Support for changing frequency weighting
2013-06-17 16:17:39 +02:00
fd8854c4d0
Add SR_CONF keys for sound pressure level time and frequency weighting
2013-06-17 16:17:39 +02:00
e1af0e85b9
cem-dt-885x: Support for turning data logging on/off
2013-06-17 16:17:38 +02:00
3e62166ed3
Add SR_ERR_TIMEOUT
2013-06-17 16:17:38 +02:00
5f2a4aff4b
added Voltcraft M-3650D Multimeter
2013-06-14 01:03:29 +02:00
14cf708fef
cem-dt-885x: Send last measurement at normal rate in hold mode
...
The device only sends the "hold" token otherwise, which clashes somewhat
with other devices. This makes the device more predictable for frontends.
2013-06-12 18:34:42 +02:00
bc1143280f
cem-dt-885x: Hold off measurements in max/min hold mode
2013-06-12 18:34:42 +02:00
e37c4b3959
cem-dt-885x: Live SPL acquisition
2013-06-12 18:34:42 +02:00
7fb8279c9b
cem-dt-885x: Flesh out driver, add scan functionality
2013-06-12 18:34:42 +02:00
8fa9368eb4
cem-dt-885x: Initial driver skeleton.
2013-06-12 18:34:42 +02:00
28083961fb
scanalogic2: Only print actual state changes in the log.
2013-06-11 18:39:55 +02:00
9526f2d4f8
scanalogic2: Replace %i with %s where needed.
2013-06-11 18:39:54 +02:00
79914b3a62
scanalogic2: Shorten a few function name prefixes.
...
The driver-private helper functions in protocol.c can have a shorter
prefix to make the code look nicer.
2013-06-11 18:39:54 +02:00
c824eb6323
scanalogic2: Cosmetics, whitespace, typos, etc.
2013-06-11 18:39:54 +02:00
e52e712d05
Initial driver for IKALOGIC Scanalogic-2
2013-06-11 18:39:54 +02:00
16e76baec9
ikalogic-scanalogic2: Initial driver skeleton.
2013-06-11 18:39:54 +02:00
eea49cf10d
ols/link-mso19: Consistency fixes.
...
Use the same setup/ordering/naming for the cleanup/dev_clear functions
as all other drivers do.
2013-06-02 17:03:40 +02:00
1c2d542df2
demo: Use std_dev_clear().
2013-06-02 16:57:07 +02:00
3b412e3a30
s/clear_instances/dev_clear/.
...
Consistently use the same name for the dev_clear() API callback
everywhere.
2013-06-02 16:56:41 +02:00
f6beaac55c
std: Drop hw_ from function names.
...
The per-driver API calls no longer have a hw_ prefix (e.g. hw_init()
became init() and so on), so drop the 'hw_' from the std versions
for those API callbacks too.
2013-06-02 16:46:18 +02:00
3678cf73fe
asix-sigma: Use std_dev_clear().
2013-06-02 16:46:18 +02:00
c43cf4d40e
alsa: Use std_dev_clear().
2013-06-02 16:46:17 +02:00
fa85f37630
rigol-ds1xx2: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
dec6c583a2
hantek-dso: Simplify cleanup().
2013-06-02 13:52:40 +02:00
658636f1c9
nexus-osciprime: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
c9d622a420
lascar-el-usb: Use std_dev_clear().
2013-06-02 13:52:40 +02:00
771bd216fa
fluke-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
732899f8cf
colead-slm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
676c28a846
agilent-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
8d18d266f5
victor-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
40bbc64293
brymen-dmm: Use std_dev_clear().
2013-06-02 13:52:39 +02:00
adf33ecce5
csv output: Fix incorrect ordering of the probes.
...
The comment for the CSV output module says probes are ordered e.g.
0,1,2,3, but the actual values were in the 3,2,1,0 order.
We're fixing this by making the order of the probe values 0,1,2,3 too
for now, but this will become a configurable option later on.
Thanks Patrick Servello <patrick.servello@gmail.com> for the patch.
2013-05-22 14:58:09 +02:00
ee8ddd8f5a
Always link against the math library.
...
This fixes bug #115 .
2013-05-10 21:46:30 +02:00
96ea73db23
session_driver: Fix return codes, cosmetics.
2013-05-10 20:37:50 +02:00
6078d2c996
Use consistent API callback function names.
...
This now matches what the 'new-driver' tool generates.
2013-05-10 20:01:37 +02:00
8111446ae0
zeroplus: Properly set inst_type to SR_INST_USB.
2013-05-10 19:16:25 +02:00
d6445cb0da
zeroplus: Use std_dev_clear().
2013-05-10 19:06:47 +02:00
8dca646ef9
uni-t-dmm: Use std_dev_clear().
2013-05-10 18:59:46 +02:00
3f0513bac1
serial-dmm: Use std_dev_clear().
2013-05-10 18:53:42 +02:00
Bert Vermeulen
Florian Steinhardt
Uwe Hermann
Marc Schink