d7b269da8f
cem-dt-885x: Mark serial access as nonblocking, remove SERIAL_NONBLOCK flag.
...
These calls were already nonblocking since this driver opened the port with
the SERIAL_NONBLOCK flag. Having marked them as such, we can remove the flag.
Also remove an unnecessary reopen of the port to change its blocking status.
2014-09-24 23:30:00 +02:00
ca4266a02f
brymen-dmm: Remove SERIAL_NONBLOCK flag.
...
All serial read/write calls in the driver are now explicitly (non)blocking.
2014-09-24 23:30:00 +02:00
776313d997
brymen-dmm: Make serial write call block.
...
This call is executed from an event handler and was previously nonblocking,
but has no partial write handling. It sends a short packet so should be OK
to block, most likely the output buffer will be empty anyway.
2014-09-24 23:30:00 +02:00
44be13b1f8
brymen-dmm: Mark serial read calls as nonblocking.
...
The driver opens the port with SERIAL_NONBLOCK so these were already
nonblocking, and are handled appropriately.
2014-09-24 23:30:00 +02:00
5305266a28
atten-pps3xxx: Remove SERIAL_NONBLOCK.
...
All serial read/write calls in the driver are now explicitly (non)blocking.
2014-09-24 23:30:00 +02:00
c3116bc311
atten-pps3xxx: Make serial write call block.
...
This call is executed from an event handler and was previously nonblocking,
but has no partial write handling. It sends a short packet so should be OK
to block, most likely the output buffer will be empty anyway.
2014-09-24 23:30:00 +02:00
e7b4103697
atten-pps3xxx: Make serial write call block in scan.
...
This is called at scan time so free to block. There is no partial write
handling and a response is expected afterwards. This should therefore be a
blocking call.
2014-09-24 23:30:00 +02:00
25dd083128
appa-55ii: Mark serial read nonblocking and remove SERIAL_NONBLOCK.
...
This is the only read/write call in the driver. It is already non-blocking
and is handled appropriately.
2014-09-24 23:29:49 +02:00
64c536be52
aglient-dmm: Remove SERIAL_NONBLOCK flag.
...
All serial calls in this driver are now explicitly (non)blocking.
2014-09-24 23:18:21 +02:00
a5053ddd21
agilent-dmm: Make serial write call block in send.
...
This call is executed from an event handler context was previously
nonblocking, however there is no handling for a partial write.
The output buffer is unlikely to be full and the commands to be sent
are short, so it should be OK to make this a blocking call.
2014-09-24 23:18:21 +02:00
485b9ae34d
agilent-dmm: Make serial write call block in scan.
...
This call is executed at scan time so is free to block. There is no
handling for a partial write and a response is expected immediately
afterwards. It should therefore be a blocking call.
2014-09-24 23:18:21 +02:00
e0b781a45b
agilent-dmm: Mark serial read call as nonblocking.
...
This driver opens the port with the SERIAL_NONBLOCK flag, so this call is
already a nonblocking one, and is handled appropriately.
2014-09-24 23:18:21 +02:00
2e360339f9
serial-dmm: Remove SERIAL_NONBLOCK flag.
...
All serial read/write calls in this driver are now explicitly
nonblocking so there is no need for this flag.
2014-09-24 23:18:20 +02:00
4277ac349c
serial-dmm: Mark serial read/write calls as nonblocking.
...
This driver opens the port with the SERIAL_NONBLOCK flag so these calls were
already non-blocking.
2014-09-24 23:18:20 +02:00
02bd1d0298
colead-slm: Mark serial write call as blocking.
...
This driver opens the port without the SERIAL_NONBLOCK flag,
so this call was already blocking.
2014-09-24 23:18:20 +02:00
bbff0fe0d2
manson-hcs-3xxx: Mark serial read call as blocking.
...
This driver opens the port without the SERIAL_NONBLOCK flag, so this call is
already a blocking one.
2014-09-24 23:18:20 +02:00
bf505eed6b
serial_readline: Implement using sp_blocking_read.
2014-09-24 23:18:20 +02:00
18e4d5bc45
serial_stream_detect: Make read nonblocking.
...
This code implements its own waiting based on baudrate, so the read itself
should be nonblocking. In general it will have been already, since drivers
almost universally use the SERIAL_NONBLOCK flag.
2014-09-24 23:18:20 +02:00
2fe6210af6
Add serial_num and connection_id fields to sr_dev_inst
2014-09-24 00:40:03 +02:00
db156e5409
Add usb_get_port_path() helper function
...
There is currently no way to uniquely identify USB devices in
libsigrok. It uses the "bus.address" scheme which is only
constant as long as the device remains attached to the bus.
In order to allow USB device persistence in PulseView, devices
need to provide a unique identifier even in absence of a
serial number. This function is the first step as it provides
the ability to query the physical location of a USB device.
2014-09-24 00:40:03 +02:00
f12d997948
demo: Fix pattern mode and amplitude option publishing.
2014-09-23 22:40:47 +02:00
9a10ce65d6
colead-slm: Properly check acquisition sample limit.
2014-09-23 22:27:34 +02:00
79f92686c6
session: Don't try to send packets if no session has been set.
...
This indicates a bug, but let's not segfault if it happens.
2014-09-22 00:47:22 +02:00
04c2f202f2
input/chronovu_la8: Fix broken I/O loop.
2014-09-22 00:47:22 +02:00
af945a6625
Typos and consistency fixes.
2014-09-19 01:03:32 +02:00
d4ccb6bd8f
yokogawa-dlm: Don't implement dummy scan options.
2014-09-17 17:41:41 +02:00
5827f61b64
Publish config key capabilities.
...
Every driver now publishes its device option config keys, i.e. the
list fetched with sr_config_list(SR_CONF_DEVICE_OPTIONS), with a
set of flags indicating which methods are implemented by the driver
for that key.
The config keys are OR'ed with any combination of SR_CONF_GET,
SR_CONF_SET and SR_CONF_LIST. These are defined as the high bits
of the uint32_t config key. Clients can OR config keys with
SR_CONF_MASK to strip out these bits. This mask will be kept up to
date if other bits are added to the capabilities list; clients MUST
therefore use SR_CONF_MASK for this.
Some keys don't have capability bits added, such as the informative
device type keys (SR_CONF_MULTIMETER, SR_CONF_OSCILLOSCOPE, ...) and
SR_CONF_CONTINUOUS.
Scan options do not have capabilities bits.
2014-09-17 15:36:11 +02:00
138589b02e
beaglelogic: Add missing scan options, and cleanup.
2014-09-16 23:51:38 +02:00
a0e0bb4149
Consistently use 'scanopts' variable across all drivers.
2014-09-16 22:19:02 +02:00
f254bc4bba
Consistently use 'devopts' variable across all drivers.
2014-09-16 22:11:39 +02:00
584560f142
Change type of SR_CONF keys to uint32_t.
2014-09-16 21:22:41 +02:00
13fef1ed24
hwdriver: Validate types of GVariants passed by user.
2014-09-14 04:47:12 +01:00
edbd09250b
scpi: Remove trailing carriage returns.
2014-09-11 17:20:28 +02:00
25f20faf0d
input: Add debug output.
2014-09-10 22:55:50 +02:00
88189019ac
input/binary: Fix broken I/O loop.
2014-09-10 22:53:28 +02:00
013ec84b83
Don't start session with 0-channel devices.
...
Drivers aren't really able to deal with that in some cases, and it
denotes a frontend bug.
2014-09-10 18:21:51 +02:00
cfd8ec53ab
scpi: Don't return NULL device from unsuccessful scan.
2014-09-09 19:53:55 +02:00
bfc8679937
scpi-pps: Clean up HP 6632B profile.
2014-09-09 13:24:30 +02:00
331f56543a
scpi-pps: Fix compile warning.
2014-09-08 23:31:54 +02:00
fdedbfcdef
scpi-pps: Fix config_set checks.
2014-09-08 23:30:21 +02:00
effb9dd1c2
rigol-ds: replace some magic numbers by appropriate constant or variable
...
This fixes bug #406 .
2014-09-08 12:58:30 +02:00
bc4a2a46ed
Add support for HP 6632B.
2014-09-08 12:45:21 +02:00
01b0257aef
scpi-pps: Create one channel per MQ/output combination.
...
This allows frontends to trivially select which MQs on which channels
they want to see; others won't even be fetched.
2014-09-08 12:45:21 +02:00
379d260965
Add private storage pointer to struct sr_channel.
2014-09-08 12:45:21 +02:00
478c8d923e
scpi-pps: Simplify SCPI command handling.
2014-09-08 12:45:21 +02:00
3222ee103d
scpi-pps: Add support for Rigol DP831A/DP832A.
2014-09-08 12:45:21 +02:00
58b77c41ff
scpi-pps: Use regex to match model names.
2014-09-08 12:45:21 +02:00
22c18b0370
scpi-pps: Generalize vendor name cleanup.
2014-09-08 12:45:21 +02:00
d4eabea847
scpi-pps: Add support for Rigol DP832.
2014-09-08 12:45:21 +02:00
9e45cd41fd
scpi-pps: Add basic cross-vendor PPS functionality.
2014-09-08 12:45:21 +02:00
a1eaa9e066
Revamp PPS-related config keys.
2014-09-08 12:45:21 +02:00
ca1a7cb56f
scpi-pps: Initial driver skeleton.
2014-09-08 12:45:21 +02:00
af1e487e3f
brymen-bm86x: Add current loop sensor support.
2014-09-06 17:22:03 +02:00
7343ad1ec7
scpi/gpib: Rename backend to scpi_libgpib.
...
libgpib is the userspace component to linux-gpib's kernel modules that
implement low-level interface drivers.
When libsigrok gets userspace GPIB interface drivers, that backend will
be the "official" scpi_gpib.
2014-09-05 18:33:48 +02:00
bb2a4ed407
Add GPIB SCPI backend using linux-gpib and libgpib.
2014-09-05 10:34:04 +01:00
e8779db70c
input/wav: Now really correctly check supported sample size.
2014-09-02 22:09:17 +02:00
110fe1b4a2
agilent-dmm: U124xx/U125xx: Add current loop sensor support.
...
Also fixes frequency support.
2014-09-02 21:55:52 +02:00
e82d34a9c2
scpi/usbtmc: Minor debug output changes.
2014-09-02 21:27:16 +02:00
73145219c0
input/wav: Correctly check supported sample size.
2014-09-02 21:26:15 +02:00
28d9df7292
input/wav: Fix broken handling of float32 samples on big endian
...
Also, make sure that floats are 32 bit even in the case of an
extensible header.
2014-09-02 19:14:25 +02:00
c7f5219e62
agilent-dmm: Add temperature regex to U125xx parser.
2014-09-02 01:01:56 +02:00
a965748ae2
agilent-dmm: U124xx/U125xx: support 5 more modes.
...
This adds support for resistance, capacitance, frequency, continuity,
and temperature.
2014-09-02 00:55:41 +02:00
5791bdf604
gmc-mh-1x-2x-rs232: Completed energy measurement ranges (V, A, W) for Metrahit 29S.
2014-09-01 23:14:56 +02:00
ee2bcdfc44
agilent-dmm: U124x/U125x fixes.
2014-09-01 21:44:37 +02:00
129d5bc961
error.c: Add missing entries.
2014-09-01 00:08:53 +02:00
ac10a927b5
yokogawa-dlm: Replace g_try_malloc() calls and fix coding style
2014-08-31 00:42:10 +02:00
0028d5a1ee
yokogawa-dlm: Lower timeout to increase throughput and fix data acq bug
2014-08-31 00:42:10 +02:00
af3487ec28
yokogawa-dlm: Do not block when receiving and save frame length in scope state
2014-08-31 00:42:10 +02:00
8ab929d614
yokogawa-dlm: Flesh out driver with current state of development
2014-08-31 00:42:10 +02:00
107639373d
yokogawa-dlm: Integrate driver skeleton
2014-08-31 00:42:10 +02:00
6e8d95a50c
input/csv: Use uint64 for samplerate option.
2014-08-30 20:16:45 +02:00
edd28877cc
input/chronovu_la8: Use uint64 for samplerate option.
2014-08-30 20:15:30 +02:00
10288172be
input/binary: Use uint64 for samplerate option.
2014-08-30 20:13:13 +02:00
4edba404b0
agilent-dmm: Add U124xx device IDs.
2014-08-30 19:32:15 +02:00
173378f0f5
agilent-dmm: Add provisional support for the U124xx.
2014-08-29 23:42:06 +02:00
f857bd928d
agilent-dmm: Assume all A and B models are identical on the wire.
2014-08-29 23:42:06 +02:00
51b92b7da4
agilent-dmm: Add RMS flag to AC voltage modes.
2014-08-29 23:42:06 +02:00
f216eb8699
agilent-dmm: Correctly parse negative overload.
2014-08-29 23:42:06 +02:00
e6284bf09f
Remove unneeded subdriver debug messages.
2014-08-29 23:02:22 +02:00
7c03b56443
agilent-dmm: Fix value parser.
...
This considered 0.0 to be an invalid result for no good reason.
2014-08-28 17:44:24 +02:00
6f479a0a72
Add support for mcupro Logic16, a Saleae Logic16 clone.
...
From sigrok's point of view, this analyzer has two differences:
* It does not require uploading the firmware.
* It returns garbage in some registers used for sanity checks.
Saleae's software ignores that garbage; sigrok only does if it
specifically detects the mcupro clone.
2014-08-28 14:03:21 +02:00
4f979115a4
input: sr_input_scan_*() now return a status code.
...
SR_OK: a match was found.
SR_ERR: no match.
SR_ERR_DATA: a match was found but the module cannot handle the input.
SR_OK_CONTINUE: some module didn't have enough data to be sure.
2014-08-28 00:22:13 +02:00
aad21bd866
Add error string for SR_OK_CONTINUE.
2014-08-28 00:19:36 +02:00
b7f446051c
Add SR_ERR_DATA.
2014-08-28 00:19:21 +02:00
cbd9e6e987
input/wav: Support for WAVE_FORMAT_EXTENSIBLE.
...
This is needed for supporting > 16-bit PCM samples.
2014-08-27 15:55:52 +02:00
962d43440a
input/wav: use our own endian macros.
...
These should work better on non-aligned memory locations.
2014-08-26 22:48:12 +02:00
5bf0dd6aff
Add RB16S and RB32S (signed) macros.
...
Also note signedness of all the endian macros.
2014-08-26 22:45:38 +02:00
06ad20bebf
input: Avoid warnings on all-zero static struct entries.
2014-08-26 12:38:41 +02:00
b84cba4dbf
input: Convert binary module.
2014-08-26 01:55:41 +02:00
75cb428f9f
input: format_match() is not required in an input module.
2014-08-26 01:55:41 +02:00
02e24c0ce0
input: Convert chronovu-la8 module.
2014-08-26 01:55:41 +02:00
5e83cd741f
input/vcd: Minor code cleanup.
2014-08-26 01:55:41 +02:00
33e4303baa
input: Only feed scanned header to streams, not scanned files.
2014-08-26 01:55:41 +02:00
115fbe9410
input: Only use header buffer for modules that need it.
...
The buffer was leaking into modules that didn't ask for it.
2014-08-26 01:55:41 +02:00
0a4d68f74b
input/wav: Send END packet on cleanup.
2014-08-26 01:55:41 +02:00
c10ef17c23
input/vcd: Send END packet on cleanup.
2014-08-26 01:55:41 +02:00
41d214f61a
input: Convert CSV module.
2014-08-26 01:55:41 +02:00
57486a7528
input: sr_input_new() always allocates the instance buffer.
2014-08-26 01:55:41 +02:00
fe4fe25bf5
input: Fix option enumeration.
2014-08-26 01:55:41 +02:00
d65fcbcd41
input: Fix internal API docs.
2014-08-26 01:55:41 +02:00
Martin Ling
Soeren Apel
Bert Vermeulen
Uwe Hermann
Aurelien Jacobs
Marcus Comstedt
Matthias Heidbrink
Peter Zotov