It was never used in practice, and it would be very cumbersome to use, since it
would have to bcreated with all the middlewares and reducers we need. After
discussing this with Lyubomir, we are confident this is not going to be needed
so it can go.
Unfortunately, as the Jitsi Meet development evolved the routing mechanism
became more complex and thre logic ended up spread across multiple parts of the
codebase, which made it hard to follow and extend.
This change aims to fix that by rewriting the routing logic and centralizing it
in (pretty much) a single place, with no implicit inter-dependencies.
In order to arrive there, however, some extra changes were needed, which were
not caught early enough and are thus part of this change:
- JitsiMeetJS initialization is now synchronous: there is nothing async about
it, and the only async requirement (Temasys support) was lifted. See [0].
- WebRTC support can be detected early: building on top of the above, WebRTC
support can now be detected immediately, so take advantage of this to simplify
how we handle unsupported browsers. See [0].
The new router takes decissions based on the Redux state at the time of
invocation. A route can be represented by either a component or a URl reference,
with the latter taking precedence. On mobile, obviously, there is no concept of
URL reference so routing is based solely on components.
[0]: https://github.com/jitsi/lib-jitsi-meet/pull/779
* fix(connection): reload immediately on possible split-brain
There isn't an explicit way to know when a split brain
scenario has happened. It is assumed it arises when an
"item-not-found" connection error is encountered early
on in the conference. So, store when a connection has
happened so it be calculated how much time has
elapsed and if the threshold has not been exceeded
then do an immediate reload of the app instead of
showing the overlay with a reload timer.
* squash: rename isItemNotFoundError -> isShardChangedError
This commit adds a state getter that considers checking the enabled/disabled state of the calendar feature, so then other features don’t have to do it manually.
Adds a fatal error state on which will depend whether or not the reload
screen is to be displayed. It is to happen when a relevant fatal error
action is not claimed by any feature for error recovery (the recoverable
flag is not set).
- Instead of having 4 listeners for local connection status
updates and 1 for remote, remove two of the redundant listeners.
- Instead of calling into 4 separate VideoLayout methods to update a
participant's connection status, expose one handler.
Up until now, mobile was oblivious to participants' presence state. Presence
state handling is required (probably, amongst other things) for "call flows".
So, let's add it! This is done by gathering the presence state when a
participant first joins, and handling subsequent changes.
Fix the "mute ping pong" for once and for all. This patch takes a new approach
to the problem: it keeps track of the user generated CallKit transaction ations
and avoids calling the delegate method in those cases.
This results in a much cleaner and easier to understand handling of the flow: if
the delegate method is called it means the user tapped on the mute button. When
we sync the muted state in JS with CallKit the delegate method won't be called
at all, thus avoiding the ping-pong altogether.
In addition, make sure all CallKit methods run in the UI thread. CallKit will
call our delegate methods in the UI thread too, thsu there is no need to
synchronize access to the listener / pending action sets.
* feat(settings): setting dialog
- Move device selection, profile edit, language select, moderator
options, and server auth into one modal with tabs.
- Remove side panel profile and settings and logic used to update
them.
- Pipe server auth status into redux to display in the settings
dialog.
- Change filmstrip only device selection popup to use the new
stateless settings dialog component.
* squash: do not show profile tab if not guest
* squash: profile button not clickable if no profile to show
* squash: nits
* ref: Settings dialog.
Emits CONFERENCE_FAILED in response to CONNECTION_FAILED event
which then triggers JitsiConference.leave() through the middleware
processing. Also base/conference state will be adjusted. It is to have
a consistent redux state in which both connection and conference are
failed. It could happen that in a buggy environment the XMPP connection
is dropped, but the media is still flowing which would result in weird
user experience.
The change to mobile/external-api is required to not emit
CONFERENCE_FAILED for CONNECTION_FAILED if the conference has been
started, because base/conference state will still hold conference
instances which are to be ended by other means and result in the
appropriate event (which will adjust the base/conference state).
Currently the listeners for disconnected and failed connection events
are unsubscribed as soon as the connection is established, so
the CONNECTION_DISCONNECTED is never triggered which would clear the
'connection' field. This commit will clear the 'connection' state on
CONNECTION_WILL_CONNECT. It's needed anyway given that there's no
guarantee on when and if the async disconnect operation will finish.
One issue caused by the 'connection' not cleared was that
CONNECTION_FAILED was not reduced correctly and the reload screen was
not displayed for the following scenario:
1. Join and leave any working conference.
2. Turn off network connectivity on the device.
3. Wait for CONNECTION_FAILED. The reload screen will not be displayed,
because CONNECTION_FAILED is not reduced correctly, because the old
'connection' value is still there.
Your truly introduced this regression in
8c7a3f16b1, alas.
The audio only mode is used to set the CallKit call type. This affects the
behavior on the recent calls entries (calls are marked either as audio or video
calls).
Sync both at the start and for transitions. The previous code was working by
chance (in a way): when the CallKit UI is presented the local video is muted,
which triggers a SET_VIDEO_MUTED action, at which point the audio-only mode was
checked for. Now we are more explicit and act on SET_AUDIO_MUTED.
Read the muted state from the track itself instead of from base/media. This
avoid expressing the incorrect desire when the call starts muted because
permission was never granted.
In the current middleware logic, when the local participant becomes
dominant speaker, a new participant can be selected to receive
high quality video from. This means large-video could potentially
do a switch to another participant when the local participant
becomes dominant speaker. Prevent such behavior.
* Adds an option to disable features based on token data.
Reverts changes from b84e910086, removes disableDesktopSharing option and an interface_config option.
* Disable recording button based on token features data.
Hide recording if local participant isGuest and roles based on token.
When enableUserRolesBasedOnToken is enabled we were not hiding the record button for guests.
* Adds filtering of jibri iqs and rayo based on features.
Moves feature checking in separate utility function.
Renames utility method.
* Adds a footer text when outbound-call is not feature enabled.
* Fixes comments.
Use it unless the connection is not ACTIVE. We don't really care if it's
recovering or whatever, if it's not active it has problems, so that's that.
This fixes a potential edge case in which the connection remains in RESTORING
state for some time.
* ref(toolbar): show recording features based on explicit configs
* squash: bring back button configs, use final config names
* squash: update interfaceConfig comment, remove unused config whitelist
* squash: change order of button enabled checks to reduce diff
* squash: fileRecording -> fileRecordings
* feat(recording): add sounds for when recording starts and stops
* squash: use constants, play sounds for file only
* squash: rename recordingStopped.mp3 -> recordingOff.mp3
* squash: flip var declaration for alpha order
Layout:
Use an absolute-fill view as the background with the sidebar on top of. This
greatly simplifies styling, as there is no need to calculate how large the
backdrop needs to be.
Animation:
Switch to a translateX transform animation. This serves 2 purposes: first,
there seems to be a bug somewhere in React Native 0.51-0.55 where the content
that is being animated starts to be clipped. Very weird! But more importantly,
translateX transmorm animations are supported by the native animation driver!
https://facebook.github.io/react-native/blog/2017/02/14/using-native-driver-for-animated.html8f5ebe5952/Libraries/Animated/src/NativeAnimatedHelper.js (L138-L176)
This makes the animation more performant and buttery smooth.
Some small cleanups are also included here.
Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.
As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
This zOrder change fixes the issue that the scrollable filmstrip videos
rendered in front of the local participant, however there is still an
issue that needs to be fixed later: The rendered videos should have
overflow: 'hidden' property applied so then they don't get rendered when
scrolled out of the ScrollView, that property however doesn't seem to
work for Video components.
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:
1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.
What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.
Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.
Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:
If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.
Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".
One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
button size to 50 (from the previous 48)
Doing so in CONFERENCE_JOINED is too late because if we are moderators that
event will come first and we won't know what ID to match it with.
This is safe because our local ID is created early.
* feat(recording): frontend logic can support live streaming and recording
Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
manually created and positioned. The container can create a reasonable number
of labels and only the container itself needs to be positioned with CSS. The
VideoQualityLabel has been shoved into the container as well because it moves
along with the recording labels.
- The action for updating recording state has been modified to enable updating
an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
component. Each RecordingLabel is in charge of displaying state for a
recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
state. Some moving around of code was necessary to get around linting errors
about the existing code being too deeply nested (even though I didn't touch
it).
* work around lib-jitsi-meet circular dependency issues
* refactor labels to use html base
* pass in translation keys to video quality label
* add video quality classnames for torture tests
* break up, rearrange recorder session update listener
* add comment about disabling startup resize animation
* rename session to sessionData
* chore(deps): update to latest lib for recording changes
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
Currently the following are implemented:
- AudioMuteButton
- HangupButton
- VideoMuteButton
In order to implement these new buttons a new abstract class was introduced,
which abstracts the ToolboxItem into a button with enough hooks so a stateful
and a stateless version of it can be created.
This patch only adds the stateful implementation of the aforementioned buttons.
This abstraction represents an action which can go anywhere in a toolbox (be
that the main toolbar or the overflow menu) and it's platform independent.
It does not depend on Redux, thus making it stateless, which facilitates its use
in stateful button implementations as well as stateless ones.
Knowledge is power, man!
The config.js cache predates the feature base/known-domains.
Technically, it's also able to recall more domains that the feature
recent-list can (because the latter limits its entries).
Knowledge is power, man!
We moved "knownDomains" from calendar-sync to base/known-domains.
However, we do have an official release in the app stores and I'd like
us to not throw away the knowledge it has acquired.
If multiple JitsiMeetView instances are created (not necessarily
existing at once), it's possible to hit a TypeError when reading the
React Component props of the currently mounted App. Anyway, in certain
places we're already protecting against that out of abundance of caution
so it makes no sense to not protect everywhere.
Make it more generic by accepting any content except of just rows with text and
icons.
In addition, rework its structure so the animation is smoother, by putting the
background overlay outside of the Modal. This way, the animation doesn't affect
the background, which won't slide down.
* fix(toolbar): make button hover bigger
* fix(toolbar): make hangup button bigger
* fix(always-on-top): make toolbar and buttons same sizes as main toolbar
* fix(toolbar): change some tooltips
* fix(toolbar): adjust side panel and filmstrip for new toolbar sizes
It seems that the external API will not send any event to let the sdk
consumer know that the conference has failed if the problem occurs at
the establishing of XMPP connection stage. That's because the config was
loaded successfully, but the conference instance does not exist yet, so
neither base/config nor base/conference will emit any failure.
Make the external API emit CONFERENCE_WILL_JOIN early on SET_ROOM action
which occurs before the XMPP connection is created. At this point we
know that config has loaded and if there's a valid conference room to
be joined. We were thinking of doing that even on CONFIG_WILL_LOAD,
but that seemed to be to risky at this point.
With this the RN component and the consumer app can share same CallKit
provider, configuration, and enable to be part of multiple listeners of
the CallKit flow events. The main driver of this is to enable the
consumer app to be able to report an incoming call to the OS before
loading the JitsiMeetView. Once the user answers the call, the app can
instantiate a JitsiMeetView, pass the CallKit call UUIID, and the Jitsi
Meet components will handle the connection and report back to CallKit
that the call has been established.
Hristo Terezov, Chris Cordle, and I/Lyubomir Marinov agreed that we'd
try to use "invite" & "invitee(s)" in Web/React's iframe API,
mobile/react-native's SDK invite API, and internally for the purposes of
consistency, ease of understanding, etc.
This can happen if there are multiple JitsiMeetView instances are active at the
same time, because there is a single bridge, which means all of them would get
the events.
Currently enterPictureInPicture action can only be dispatched when
the app is on the conference view and the enter PiP button is displayed,
so no check should be necessary.
Activity.enterPictureInPictureMode method must be invoked synchronously
on userLeaveHint callback in order to be sure that the current Activity
is still visible (does not transit to PAUSED state). Previously if the
asynchronous processing would be delayed enough for the Activity to go
into the PAUSED state it will be too late to go into the PiP mode.
To reduce the amount of motion that has to be blurred, use a canvas
to essentially set the FPS of the video background. This canvas
component is behind a temporary feature flag, as well as being able
to disable the blur, so it can be played around with on deployed
environments.
- Update font files to add new icon.
- Update markup and style so the icon has a small background
to fill in the text of the icon.
- Remove some css transitions that don't seem to do much.
In order to be able to add analytics to the deep-linking pages the
lib-jitsi-meet initialization has been moved so it happens earlier.
The introduced `initPromise` will eventually disappear, once conference is
migrated into React and / or support for Temasys is dropped. At that stage, it
can be turned into a sync function which all platforms share.
* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks
Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>
* Adds in memory log storage, to be used while testing.
Enabling it only when config.debug is set, a configuration provided by jitsi-meet-torture.
* Moves to using config.testing.testMode property for logs storage.
* Fixes comments.
Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:
"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."
It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).
Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.
* feat(recording): show the YouTube live stream URL
- From the start live stream dialog, push up the broadcast ID
of the chosen broadcast. It is assumed the ID can be used to
create the YouTube link.
- Listen for lib-jitsi-meet to emit updates of the known live
stream URL, shove it into redux, and have InfoDialog display
it.
* ref(info): pass in dial in and live stream url
Passing these values in should trigger AtlasKit InlineDialog
to re-render and reposition itself.
* ref(info): use conference existence as trigger for autoshowing dialog
* feat(info): add live stream link to invite copy
* Revert "ref(info): use conference existence as trigger for autoshowing dialog"
This reverts commit 1072102267.
* hidden -> url
* _onClickHiddenURL -> _onClickURLText
Since the main conference container is no longer "clickable" there must
be a way for clicking on the "large video". A clickable TestHint nested
in ParticipantView makes it easier for dealing with the fact that the
click handler is not always on the same component (required for the
pinch and zoom feature to work correctly).
Allows to bind a click handler to a TestHint.
When a mobile test wants to click an UI element it must be able to
locate it through the accessibility layer. Now the problem with that is
that there is currently no uniform way for finding element on both iOS
and Android. This problem is solved by TestHint component which takes
an id parameter which then can be specified in the corresponding java
TestHint class in jitsi-meet-torture to easily find it. By being able to
add a click handler to a TestHint, it's possible to duplicate original
handler under nested TestHint and then find it easily on the torture
side.
Adds the logic to render TestHint only when the test mode is enabled
in order to be able to put independent TestHints in other places than
the TestConnectionInfo component.
Be explciit about the appearance we desire, since each mounted StaturBar
component will override the existing values. In this case, the problem was
caused because the default on iOS is dark, whereas it's light on Android.
Set it to light so it works consistently across both, which is what we want.
It's too sensitive and most of the time I cannot perform an onPress. In
contrast, the builtin/default/standard onPress is noticeably more
forgiving. While we fix the sensitivity of "pinch to zoom", don't use
its onPress unless absolutely necessary i.e. use it only for desktop
streams.
Zoltan Bettenbuk suggested the following:
const state = getState();
if (desiredTypes.length === 0) {
- const { audio, video } = state['features/base/media'];
-
- audio.muted || desiredTypes.push(MEDIA_TYPE.AUDIO);
- video.muted || desiredTypes.push(MEDIA_TYPE.VIDEO);
+ const startAudioOnly = getPropertyValue(state, 'startAudioOnly');
+ const startWithAudioMuted
+ = getPropertyValue(state, 'startWithAudioMuted');
+ const startWithVideoMuted
+ = getPropertyValue(state, 'startWithVideoMuted');
+
+ if (!startWithAudioMuted) {
+ desiredTypes.push(MEDIA_TYPE.AUDIO);
+ }
+ if (!startAudioOnly && !startWithVideoMuted) {
+ desiredTypes.push(MEDIA_TYPE.VIDEO);
+ }
}
const availableTypes
The final commit is really a different implementation of the same idea
but takes into account that the state of base/media already contains the
intent of the URL and notices the delay in the realization of the
background app state.
Additionally, unbreaks one more case where setAudioOnly is incorrectly
dispatched on CONFERENCE_LEFT or CONFERENCE_FAILED and, consequently,
overrides the intent of the URL.
Saúl Ibarra Corretgé
Bettenbuk Zoltan
Lyubo Marinov
hristoterezov
virtuacoplenny
paweldomas
damencho
bbaldino
Saúl Ibarra Corretgé
Daniel Ornelas
Guus der Kinderen
Louis Chen
Ryan Peck
George Politis