Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:
1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.
What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
If multiple JitsiMeetView instances are created (not necessarily
existing at once), it's possible to hit a TypeError when reading the
React Component props of the currently mounted App. Anyway, in certain
places we're already protecting against that out of abundance of caution
so it makes no sense to not protect everywhere.
Make it more generic by accepting any content except of just rows with text and
icons.
In addition, rework its structure so the animation is smoother, by putting the
background overlay outside of the Modal. This way, the animation doesn't affect
the background, which won't slide down.
It seems that the external API will not send any event to let the sdk
consumer know that the conference has failed if the problem occurs at
the establishing of XMPP connection stage. That's because the config was
loaded successfully, but the conference instance does not exist yet, so
neither base/config nor base/conference will emit any failure.
Make the external API emit CONFERENCE_WILL_JOIN early on SET_ROOM action
which occurs before the XMPP connection is created. At this point we
know that config has loaded and if there's a valid conference room to
be joined. We were thinking of doing that even on CONFIG_WILL_LOAD,
but that seemed to be to risky at this point.
With this the RN component and the consumer app can share same CallKit
provider, configuration, and enable to be part of multiple listeners of
the CallKit flow events. The main driver of this is to enable the
consumer app to be able to report an incoming call to the OS before
loading the JitsiMeetView. Once the user answers the call, the app can
instantiate a JitsiMeetView, pass the CallKit call UUIID, and the Jitsi
Meet components will handle the connection and report back to CallKit
that the call has been established.
Currently enterPictureInPicture action can only be dispatched when
the app is on the conference view and the enter PiP button is displayed,
so no check should be necessary.
Activity.enterPictureInPictureMode method must be invoked synchronously
on userLeaveHint callback in order to be sure that the current Activity
is still visible (does not transit to PAUSED state). Previously if the
asynchronous processing would be delayed enough for the Activity to go
into the PAUSED state it will be too late to go into the PiP mode.
* Button conditionally shown based on if the feature is enabled and available
* Hooks for launching the invite UI (delegates to the native layer)
* Hooks for using the search and dial out checks from the native layer (calls back into JS)
* Hooks for handling sending invites and passing any failures back to the native layer
* Android and iOS handling for those hooks
Author: Ryan Peck <rpeck@atlassian.com>
Author: Eric Brynsvold <ebrynsvold@atlassian.com>
Activity.enterPictureInPictureMode can fail for a couple of reasons
mentioned in the JSDoc:
"The system may disallow entering picture-in-picture in various cases,
including when the activity is not visible, if the screen is locked or
if the user has an activity pinned."
It seems to be safe to assume that those cases will be caught by
a RuntimeException handler (only RuntimeExceptions can be left without
explicit catch block).
Anyway the root cause for problems is the fact that the current process
for going to the picture in picture mode is not synchronised with
Activity's lifecycle. On Activity's "userLeaveHint" callback we dispatch
async task to the JS code which only then after dispatching some more
stuff eventually call native method that enter PiP. In case we spend too
much time on the JS side and the Activity goes to PAUSED state the call
will fail with IllegalStatException: "activity is not visible",
"activity is paused" etc. This means with this fix the app will not
crash, but we'll see it sometimes not go to the PiP mode as expected.
This only works automatically on Android >= 8. On other platforms / versions, it
relies on the SDK user on implementing a "reduced UI" mode and reacting to the
"request PIP" delegate method.
On Android we go into "immersive mode" when in a conference, this is our way of
being full-creen. There are occasions, however, in which Android takes us out of
immerfive mode without us (the application / SDK) knowing: when a child activity
is started, a modal window shown, etc.
In order to be resilient to any possible change in the immersive mode, register
a listener which will be called when Android changes it, so we can re-eavluate
if we need it and thus re-enable it.
Turns out this was a bit more involved than I originally thought due to an
interesting (corner) case: IFF the user was never asked about microphone
permissions and the call starts with audio muted, unmuting from the CallKit
interface won't work (iOS won't show the prompt, it fails immediately) and we
need to sync the mute state back.
* ref: Restructures the pinned/unpinned events.
* ref: Refactors the "audio only disabled" event.
* ref: Refactors the "stream switch delay" event.
* ref: Refactors the "select participant failed" event.
* ref: Refactors the "initially muted" events.
* ref: Refactors the screen sharing started/stopped events.
* ref: Restructures the "device list changed" events.
* ref: Restructures the "shared video" events.
* ref: Restructures the "start muted" events.
* ref: Restructures the "start audio only" event.
* ref: Restructures the "sync track state" event.
* ref: Restructures the "callkit" events.
* ref: Restructures the "replace track".
* ref: Restructures keyboard shortcuts events.
* ref: Restructures most of the toolbar events.
* ref: Refactors the API events.
* ref: Restructures the video quality, profile button and invite dialog events.
* ref: Refactors the "device changed" events.
* ref: Refactors the page reload event.
* ref: Removes an unused function.
* ref: Removes a method which is needlessly exposed under a different name.
* ref: Refactors the events from the remote video menu.
* ref: Refactors the events from the profile pane.
* ref: Restructures the recording-related events.
Removes events fired when recording with something other than jibri
(which isn't currently supported anyway).
* ref: Cleans up AnalyticsEvents.js.
* ref: Removes an unused function and adds documentation.
* feat: Adds events for all API calls.
* fix: Addresses feedback.
* fix: Brings back mistakenly removed code.
* fix: Simplifies code and fixes a bug in toggleFilmstrip
when the 'visible' parameter is defined.
* feat: Removes the resolution change application log.
* ref: Uses consistent naming for events' attributes.
Uses "_" as a separator instead of camel case or ".".
* ref: Don't add the user agent and conference name
as permanent properties. The library does this on its own now.
* ref: Adapts the GA handler to changes in lib-jitsi-meet.
* ref: Removes unused fields from the analytics handler initializaiton.
* ref: Renames the google analytics file and add docs.
* fix: Fixes the push-to-talk events and logs.
* npm: Updates lib-jitsi-meet to 515374c8d383cb17df8ed76427e6f0fb5ea6ff1e.
* fix: Fixes a recently introduced bug in the google analytics handler.
* ref: Uses "value" instead of "delay" since this is friendlier to GA.
Rearrange the ToolbarButtons in the secondary Toolbar in order to mostly
group the media-related ones such as the AudioRouteButton, the
switchCamera button, and the audio-only mode button.
Due to the difference in nature, the iOS and Android implementations are
completely different:
iOS: MPVolumeView is used, which allows us to place a button which will launch a
native route picker provided by iOS itself. This view is different depending on
the iOS version, with the iOS 11 version being more complete.
Android: A completely custom component is used, which displays a bottom sheet
with the device categories, not devices individually. This is akin to the sheet
in the builtin dialer.
This commit adds extra actions/Redux state to be able to deal with
the GUM operation being in progress. There will be early local track
stub in the Redux state for any a local track for which GUM has been
called, but not completed yet.
Local track is considered valid only after TRACK_ADDED event when it
will have JitsiLocalTrack instance set.
paweldomas
Daniel Ornelas
Lyubo Marinov
Bettenbuk Zoltan
Saúl Ibarra Corretgé
Ryan Peck
virtuacoplenny
bgrozev
hristoterezov