The package now requires using a ModalTransition component
to handle animations. The existing DialogContainer component
has been split into native and web implementations to support
this change.
It's possible for the YouTube api to return zero broadcasts
or broadcasts without any streams--streams are what are
associated with stream keys. In this case, instead of showing
an empty selector or no selector, show a message with a link
to where the stream key can be obtained.
Provide a client-side notice if the YouTube live stream key
looks like it might be in the wrong format. Normally the
stream key looks like 4 groups of 4 numbers and letters,
each separated by a dash. The warning does not block submission
in case YouTube changes their stream key format.
Updating react-native-fast-image brings a couple of interesting changes:
- onLoad is not called for cached images (reported and ignored upstream)
- load progress not working if component not displayed (on Android)
In order to fix this, a combination of 2 approaches was used:
- onLoadEnd / onError are used to detect if the image is loaded
- off-screen rendering is used on Android to get progress events
While implementing the above, yours truly noticed the complexity was increasing
way too much, so some extra refactoring was also performed:
- componentWillReceiveProps is dropped
- an auxiliary component (AvatarContent) is used for the actual content of the
Avatar, with the former passing the key prop to the latter
Using the key prop ensures AvatarContent will be recreated if the URI changes,
which is not a bad idea anyway, since the new image needs to be downloaded.
* Replaces smileys and the logic of replacing links/emails.
Now using react-emoji-render and react-linkify.
* Fixes heart emoji.
It is known that current implementation doesn't work with ascii emojis that contain < or >, like >:( >:-( </3 <\3 <3. Making those work may bring some xss issues.
* Adds '_blank' and 'noopener noreferrer' to the replaced links.
* Fixes package-lock links (http vs https).
* Fixes comments.
The upstream package has been unmaintained for 2 years now, and making the litle
changes needed as React Native needs them is getting old. The actual
funcionality is a couple of one-liners plus tons of boliterplate, which gets
reduced by quite a bit if we just embed it. So here it goes.
It doesn't seem like videoTrack needs to be set onto state
if it can be accessed directly from props. Removing the state
automatically removes the deprecated componentWillReceiveProps.
Filmstrip remote thumbnails display under certain conditions, as
defined in filmstrip/functions.web.js. Previously the raw
participant count was used, which included fake participants.
Using the selector getParticipantCount excludes fake participants,
causing YouTube thumbnails to remain hidden in a 1-on-1 call.
- Derive the showOverlay state. When the sidebar should be hidden,
the internal showOverlay state should remain true until the
animation hides it. When the sidebar should show, the showOverlay
state should become true immediately.
- Use PureComponent to prevent additional animation triggers
instead of explicitly checking changes to the "show" prop.
Based on react-native docs, looks like animations should be
started after mount. Updating animation states I'm not certain
on so I moved it to componentDidUpdate and tested with the
live streaming label to ensure the component still animated fine.
To kill componentWillMount, call destroyLocalTrack after mount.
Navigation to the blank page was synthetically forced and no
UI issues were noticed, possibly because destroyLocalTrack may
already be async so destruction may already have been occurring
after mount.
For the most part the changes are taking the "static propTypes" declaration off
of components and declaring them as Flow types. Sometimes to support flow some
method signatures had to be added. There are some exceptions in which more had
to be done to tame the beast:
- AbstractVideoTrack: put in additional truthy checks for videoTrack.
- Video: add truthy checks for the _videoElement ref.
- shouldRenderVideoTrack function: Some component could pass null for the
videoTrack argument and Flow wanted that called out explicitly.
- DisplayName: Add a truthy check for the input ref before acting on it.
- NumbersList: Move array checks inline for Flow to comprehend array methods
could be called. Add type checks in the Object.entries loop as the value is
assumed to be a mixed type by Flow.
- AbstractToolbarButton: add additional truthy check for passed in type.
- Change "features/chat" to support listening for new chat messages
and storing them, removing that logic from conference.js.
- Combine chat.scss and side_toolbar_container.css, and remove unused
scss files. Chat is the only side panel so the two concepts have
been merged.
- Remove direct access to the chat feature from non-react and non-redux
flows.
- Modify the i18n translate function to take in an options object.
By default the option "wait" is set to true, but that causes
components to mount after the parent has been notified of
an update, which means autoscrolling down to the latest rendered
messages does not work. With "wait" set to false, the children
will mount and then the parent will trigger componentDidUpdate.
- Create react components for chat. Chat is the side panel
plus the entiren chat feature. ChatInput is a child of Chat and
is used for composing messages. ChatMessage displays one message
and extends PureComponent to limit re-renders.
- Fix a bug where the toolbar was not showing automatically when
chat is closed and a new message is received.
- Import react-transition-group to time the animation of the
side panel showing/hiding and unmounting the Chat component.
This gets around the issue of having to control autofocus if the
component were always mounted and visibility toggled, but
introduces not being able to store previous scroll state
(without additional work or re-work).
* feat: Displays the server region in the stats panels.
* feat: Displays the server count in the local stats panel.
* ref: Renames a variable.
* fix: Makes bridgeCount a number, clarifies docs.
* chore: Updates lib-jitsi-meet to 1ac6df97e3aa5ff880129a95754d491d89ea8c25.
There are (at least) two changes that are breaking:
- defaultTab is gone
- The re-rendering logic looks to have been re-written so that
passing in a new array of tabs causes a re-render, which can
reset the currently selected tab.
The fixes involved removing defaultTab from each tab configuration,
as it is no longer respected anyway. Also, instead of letting Tabs
be uncontrolled and allowing it to set its own selected, which
would result in the first tab automatically being selected on
Tabs re-render, use Tabs a controlled prop to dicate which
tab is selected; this is accomplished by specifying a selected
prop.
* feat(tile-view): initial implementation for mobile
- Create a tile view component for displaying thumbnails in a
two-dimensional grid.
- Update the existing TileViewButton so it shows a label in the
overflow menu.
- Modify conference so it can display TileView while hiding
Filmstrip.
- Modify Thumbnail so its width/height can be set and to prevent
pinning while in tile view mode.
* use style array for thumbnail styles
* change ternary to math.min for expressiveness
* use dimensiondetector
* pass explicit disableTint prop
* use makeAspectRatioAware instead of aspectRatio prop
* update docs
* fix docs again (fix laziest copy/paste job I've ever done)
* large-video: rename onPress prop to onClick
* change forEach to for...of
* use truthy check fallthrough logic instead of explicit if
* put tile view button second to last in menu
* move spacer to a constant
* the magical incantation to make flow shut up
Extracts methods which share the common logic. There are still some
leftovers on the web side left which are not used on RN. But this can be
a first step.
* Add joing button to the calendar events.
* Add space between calendar lines.
* Adjust recent list name.
* Fixes test failure.
* Restyle mobile recent list message.
* Add analytics events.
* Addressing PR review comments.
The current code was splitting it on a space, which made nicknames such as “Link Mauve” appear as “Link”, whereas it gets displayed correctly everywhere else in the UI.
* Implements calendar entries edit.
Share text generation between calendar-sync and the share-room feature.
* Fixing comments.
* Clone the event element we modify on update.
If a relative BOSH URL is found (as docker-jitsi-meet does) construct a full URL
based on the location URL and context root.
Also remove some default options since we need the config file anyway, so I see
no point in doing the extra work.
Yours truly refactored routing in https://github.com/jitsi/jitsi-meet/pull/3222
and broke it. When a bare room is entered the pathname was not updated when
applying the default URL.
* Refactor calendar-sync feature to be loaded on web.
For the web part it just adds new property to enable/disable calendar web integration, disabled by default.
* Initial implementation of retrieving google calendar events.
* Initial implementation of retrieving microsoft calendar events.
* Fixes comments.
* Rework to use the promise part of microsoft-graph-client api.
* Moves dispatching some actions, fixing comments.
* Makes sure we do not initializeClient google-api client multiple times.
* Do not try to login when fetching calendar entries.
The case where there is a calendar type google selected, but not logged in, trying to login on loading welcome page will show a warning that it tried to open a popup, which was denied by browser.
* Updates profile display data on sign in.
* Propagate google-api state to calendar-sync only if we use google cal.
* Adds sign out action.
* Clears the event listener when the popup closes.
* Clears calendarIntegrationInstance on signOut.
* WIP: UI for calendar settings, refactor auth flows
* Clean up some unused constants, functions and exports.
* break circular dependency of function and constant
* Exports only isCalendarEnabled from functions.
* Checks isSignedIn when doing fetchCalendarEntries on web.
* address comments
List microsoftApiApplicationClientID in undocument config.
remove unused SET_CALENDAR_TYPE action
use helper for calendar enabled in bootstrap
reorder actions
reorder imports
change order of signin -> set type -> update profile
add logging for signout error
reword setting dialog desc to avoid redundancy
add jsdoc to microsoft button props
reorder calendar constants
move default state to reducer (not reused anywhere)
update comment about calendar-sync due to removal of getCalendarState
update comment for getCalendarIntegration
remove vague comment
alpha order reducer, return default state on reset
alpha order persistence registry
remove unnecessary getType from apis
update comments in microsoftCalendar
alpha order google-api exports, use api.get in loadGoogleAPI
set jsdoc for google signin props
alpha order googleapi methods
fix calendartab docs
* Moves fetching calendar from APP_WILL_MOUNT to SET_CONFIG.
The web part needs configuration in order to refresh tokens (Microsoft).
* Fixes storing token expire time and refreshing tokens in Microsoft impl.
* Address comments
updateProfile changed to getCurrentEmail
rename result to results
stop storing integration in redux, store if ready for use
use existing helpers to parse redirect url
* update jsdocs, get google app id from redux
* clear integration instead of actual sign out
* feat(tile-view): initial implementation for tile view
- Modify the classname on the app root so layout can adjust
depending on the desired layout mode--vertical filmstrip,
horizontal filmstrip, and tile view.
- Create a button for toggling tile view.
- Add a StateListenerRegistry to automatically update the
selected participant and max receiver frame height on tile
view toggle.
- Rezise thumbnails when switching in and out of tile view.
- Move the local video when switching in and out of tile view.
- Update reactified pieces of thumbnails when switching in and
out of tile view.
- Cap the max receiver video quality in tile view based on tile
size.
- Use CSS to hide UI components that should not display in tile
view.
- Signal follow me changes.
* change local video id for tests
* change approach: leverage more css
* squash: fix some formatting
* squash: prevent pinning, hide pin border in tile view
* squash: change logic for maxReceiverQuality due to sidestepping resizing logic
* squash: fix typo, columns configurable, remove unused constants
* squash: resize with js again
* squash: use yana's math for calculating tile size
When newly joined clients register for XMPP events upon
CONFERENCE_JOINED, those events that is carried by presence (e.g. START_COMMAND) was
already fired.
Temporary solution is to let the client send a ping message after
registering XMPP event listeners. The moderator will respond with
pong, which forces the presence to be resent.
index.js of local recording
local-recording(ui): recording button
local-recording(encoding): flac support with libflac.js
Fixes in RecordingController; integration with UI
local-recording(controller): coordinate recording on different clients
local-recording(controller): allow recording on remote participants
local-recording(controller): global singleton
local-recording(controller): use middleware to init LocalRecording
cleanup and documentation in RecordingController
local-recording(refactor): "Delegate" -> "Adapter"
code style
stop eslint and flow from complaining
temp save: client status
fix linter issues
fix some docs; remove global LocalRecording instance
use node.js packaging for libflac.js; remove vendor/ folder
code style: flacEncodeWorker.js
use moment.js to do time diff
remove the use of console.log
code style: flac related files
remove excessive empty lines; and more docs
remove the use of clockTick for UI updates
initalize flacEncodeWorker properly, to avoid premature audio data transmission
move the realization of recordingController events
from LocalRecordingButton to middleware
i18n strings
minor markup changes in LocalRecordingInfoDialog
fix documentation
* feat: Displays the E2E RTT in the connection stats table.
* fix: Whitelists the ping config properties.
* ref: Addresses feedback.
* npm: Updates lib-jitsi-meet to e097a1189ed99838605d90b959e129155bc0e50a.
* ref: Moves the e2ertt and region to the existing stats object.
* feat(welcome-page): be able to open settings dialog
- Create a getter for getting a settings tab's props so the device
selection tab can get updated available devices.
- Be able to call a function from a tab after it has mounted. This is
used for device selection to essentially call enumerateDevices on
the welcome page so the device selectors are populated.
- Remove event UIEvents.AUDIO_OUTPUT_DEVICE_CHANGED. Instead directly call
setAudioOutputDeviceId where possible.
- Fix initialization of the audioOutputDeviceId in settings by defaulting
the audio output device to the one set in settings.
* squash: updateAvailableDevices -> getAvailableDevices, add comment for propsUpdateFunction
Use react-native-fastimage, which uses 2 full-native image impleentations using
well known and mature (native) libraries.
This gets us rid of 2 libraries which were observerd as a source of bugs and
created trouble with dependencies: react-native-fetch-blob and
react-native-img-cache. They are also no longer well maintained.
* ref(filmstrip): create an empty container for local filmstrip move
This might be necessary for tile view. To support making the
local video display at the end of remote videos while in tile
view, but separateed from scrollable remote videos, moving
the local video might be necessary. By creating an empty
container, there is a target for local video to move to.
* squash: rename id
* [WEB] add UI for transcription
* add analytics event for button, do not use global APP object
* use props instead of state, use local conference to kick participant
* put imports in alphabetical order
* add translation for TranscribingLabel
* fix merge conflict
* add closed caption button
* purge OverFlowMenuItem which starts and stops Transcription
* readd closed caption icon and fix small issues due to purge
* delete unused icon in _font.scss
* ref(filmstrip): apply filmstrip class to Conference root
Instead of apply the layout class to the body, it can be
applied to Conference. This will allow easier switching
between tile filmstrip and horizontal/vertical filmstrip.
* squash: fix typo filstrip
Move away from middleware and instead update video quality
when the selected video quality updates in redux. This also
lead to removing of automatically exiting audio only because
with the change it's not so readily possible to tell if the
user switched off audio only by re-selecting the already
preferred video quality. Removing this automagic removed
some additional checking done for mobile.
The internal max will be used for tile view. Whatever the
user has set for preferred video quality, the internal
maximum will be respected. This allows for the case where
the user prefers high definition video, but in tile view
it only makes sense to send low definition; ux wise the
user is allowed to continue messing with the video quality
slider.
- "preferred" is being appended because in tile view there is a
concept of what the user prefers to be the maximum video quality
but there is also a maximum respected internall. For example,
the user may prefer HD, but in tile view the tiles may be small
so internall the preferred would be set to LD.
- "receive" is being renamed to "receiver" to be consistent with
the naming in lib-jitsi-meet.
* Get back the Notice class
* Add Notice component in the Conference web view
* Notice is not exported in index.js. Only used internally by
Conference.
* noticeMessage value obtained from features/base/config
* using mapStateToProps
* value is stored in the internal _message property
* Notice component, orignal in `toolbox` is moved from
`toolbox/components` to `conference/components`
* Notice component only implemented and renderable in web views
* Dummy `conference/components/Notice.naive.js`
This patch is partially based in the removed logic included
originally in:
commit 59a74153dc
(tag: jitsi-meet_1886, tag: jitsi-meet_1885, tag: 1797, tag: 1796)
Author: Ilya Daynatovich <shupuercha@gmail.com>
Date: Mon Mar 20 11:04:54 2017 -0500
Toolbar notice as React Component
In reply to: Saúl Ibarra Corretgé @saghul> comments
Signed-off-by: Pablo Saavedra <psaavedra@igalia.com>
* ref(popover): allow for popover content from the right
Popovers contents can display to the left of the trigger
and above the trigger. Add the ability to display to the
right of the trigger my adding mouseover padding. This
may be needed for tile view, depending on where the triggers
are located.
* squash: abstract common css proprties into placeholder class
* fix(welcome-page): css tweaks in prep for branded welcome page
- Watermarks should no longer depend on toolbar size. The left watermark made
room for the toolbar when the toolbar was on the left side of the screen, but
the toolbar has been moved to the bottom. The right watermark...well it'll
clash with the vertical filmstrip but at least the margins will be consistent
with the left watermark.
- Apply new font-family so fonts are more likely to be consistent across the
app. Design likes SF UI and keeps requesting it so use it by default.
- Change sizings of welcome page header to be more responsive. This will help
the header be scrollable when there is no additional content and the header
overflows.
- Change colors of the welcome page header and remove background image that
was in the header. Leave in the dom for the background image in case other
deployments need to continue showing an image.
- Add a period to the title of the welcome page.
- Move watermarks dom location as it is not part of the header; it's part of the
whole page.
* [squash] Size and font adjustments. Renaming.
* ref(large-video): combine selectParticipant logic from web
Currently native/middleware/redux has its own logic for selecting a participant
on the bridge. To have the logic web respect that logic, a few changes are
needed.
- Web no longer has its own call to selectParticipant.
- To keep in line with web logic selectParticipant action should act even when
there is no track. This makes it so that when a participant does get a track
that the bridge will send high quality. The bridge can already handle when the
selected participant does not have a video track.
- The timing of web is such that on joining an existing conference, a
participant joins and the participant's tracks get updated and then the
conference is joined. The result is selectParticipant does not get fired
because it no-ops when there is no conference. To avoid having to make
uncertain changes (to be lazy), update the selected participant on conference
join as well.
* squash: update comment, pass message to error handler
It will only be requested if a user joins a meeting or flips the switch from
video to audio and back, but never as the first thing when the welcome page is
mounted.
It's a separate view (on the native side) and app (on the JavaScript side) so
applications can use it independently.
Co-authored-by: Shuai Li <sli@atlassian.com>
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
* Show subtitles when Jigasi sends transcription results in JSON
* fix: Import PropTypes from prop-types.
* apply feedback on initial PR
* Changed Object to Map, alphabetic ordering fixes ,css changes in transcription subtitles
* Sends Map of transcriptMessages as prop to Component
* Documentation fixes and uses config in redux state
* Minor doc fix
* rename feature 'transcription' to 'subtitles'
* Moves subtitles config to interfaceConfig and minor fixes
* minor lint fix
BaseApp does all the heavy-lifting related to creating the redux store,
navigation, and so on.
App currently handles URL props and actually triggering navigation based on
them.
Move it away from AbstractApp into an auxiliary function. In addition, introduce
a new `getServerURL` function which gets the configured server URL and defaults
to meet.jit.si as before.
It was never used in practice, and it would be very cumbersome to use, since it
would have to bcreated with all the middlewares and reducers we need. After
discussing this with Lyubomir, we are confident this is not going to be needed
so it can go.
Unfortunately, as the Jitsi Meet development evolved the routing mechanism
became more complex and thre logic ended up spread across multiple parts of the
codebase, which made it hard to follow and extend.
This change aims to fix that by rewriting the routing logic and centralizing it
in (pretty much) a single place, with no implicit inter-dependencies.
In order to arrive there, however, some extra changes were needed, which were
not caught early enough and are thus part of this change:
- JitsiMeetJS initialization is now synchronous: there is nothing async about
it, and the only async requirement (Temasys support) was lifted. See [0].
- WebRTC support can be detected early: building on top of the above, WebRTC
support can now be detected immediately, so take advantage of this to simplify
how we handle unsupported browsers. See [0].
The new router takes decissions based on the Redux state at the time of
invocation. A route can be represented by either a component or a URl reference,
with the latter taking precedence. On mobile, obviously, there is no concept of
URL reference so routing is based solely on components.
[0]: https://github.com/jitsi/lib-jitsi-meet/pull/779
* fix(connection): reload immediately on possible split-brain
There isn't an explicit way to know when a split brain
scenario has happened. It is assumed it arises when an
"item-not-found" connection error is encountered early
on in the conference. So, store when a connection has
happened so it be calculated how much time has
elapsed and if the threshold has not been exceeded
then do an immediate reload of the app instead of
showing the overlay with a reload timer.
* squash: rename isItemNotFoundError -> isShardChangedError
This commit adds a state getter that considers checking the enabled/disabled state of the calendar feature, so then other features don’t have to do it manually.
Adds a fatal error state on which will depend whether or not the reload
screen is to be displayed. It is to happen when a relevant fatal error
action is not claimed by any feature for error recovery (the recoverable
flag is not set).
- Instead of having 4 listeners for local connection status
updates and 1 for remote, remove two of the redundant listeners.
- Instead of calling into 4 separate VideoLayout methods to update a
participant's connection status, expose one handler.
Up until now, mobile was oblivious to participants' presence state. Presence
state handling is required (probably, amongst other things) for "call flows".
So, let's add it! This is done by gathering the presence state when a
participant first joins, and handling subsequent changes.
Fix the "mute ping pong" for once and for all. This patch takes a new approach
to the problem: it keeps track of the user generated CallKit transaction ations
and avoids calling the delegate method in those cases.
This results in a much cleaner and easier to understand handling of the flow: if
the delegate method is called it means the user tapped on the mute button. When
we sync the muted state in JS with CallKit the delegate method won't be called
at all, thus avoiding the ping-pong altogether.
In addition, make sure all CallKit methods run in the UI thread. CallKit will
call our delegate methods in the UI thread too, thsu there is no need to
synchronize access to the listener / pending action sets.
* feat(settings): setting dialog
- Move device selection, profile edit, language select, moderator
options, and server auth into one modal with tabs.
- Remove side panel profile and settings and logic used to update
them.
- Pipe server auth status into redux to display in the settings
dialog.
- Change filmstrip only device selection popup to use the new
stateless settings dialog component.
* squash: do not show profile tab if not guest
* squash: profile button not clickable if no profile to show
* squash: nits
* ref: Settings dialog.
Emits CONFERENCE_FAILED in response to CONNECTION_FAILED event
which then triggers JitsiConference.leave() through the middleware
processing. Also base/conference state will be adjusted. It is to have
a consistent redux state in which both connection and conference are
failed. It could happen that in a buggy environment the XMPP connection
is dropped, but the media is still flowing which would result in weird
user experience.
The change to mobile/external-api is required to not emit
CONFERENCE_FAILED for CONNECTION_FAILED if the conference has been
started, because base/conference state will still hold conference
instances which are to be ended by other means and result in the
appropriate event (which will adjust the base/conference state).
Currently the listeners for disconnected and failed connection events
are unsubscribed as soon as the connection is established, so
the CONNECTION_DISCONNECTED is never triggered which would clear the
'connection' field. This commit will clear the 'connection' state on
CONNECTION_WILL_CONNECT. It's needed anyway given that there's no
guarantee on when and if the async disconnect operation will finish.
One issue caused by the 'connection' not cleared was that
CONNECTION_FAILED was not reduced correctly and the reload screen was
not displayed for the following scenario:
1. Join and leave any working conference.
2. Turn off network connectivity on the device.
3. Wait for CONNECTION_FAILED. The reload screen will not be displayed,
because CONNECTION_FAILED is not reduced correctly, because the old
'connection' value is still there.
Your truly introduced this regression in
8c7a3f16b1, alas.
The audio only mode is used to set the CallKit call type. This affects the
behavior on the recent calls entries (calls are marked either as audio or video
calls).
Sync both at the start and for transitions. The previous code was working by
chance (in a way): when the CallKit UI is presented the local video is muted,
which triggers a SET_VIDEO_MUTED action, at which point the audio-only mode was
checked for. Now we are more explicit and act on SET_AUDIO_MUTED.
Read the muted state from the track itself instead of from base/media. This
avoid expressing the incorrect desire when the call starts muted because
permission was never granted.
In the current middleware logic, when the local participant becomes
dominant speaker, a new participant can be selected to receive
high quality video from. This means large-video could potentially
do a switch to another participant when the local participant
becomes dominant speaker. Prevent such behavior.
* Adds an option to disable features based on token data.
Reverts changes from b84e910086, removes disableDesktopSharing option and an interface_config option.
* Disable recording button based on token features data.
Hide recording if local participant isGuest and roles based on token.
When enableUserRolesBasedOnToken is enabled we were not hiding the record button for guests.
* Adds filtering of jibri iqs and rayo based on features.
Moves feature checking in separate utility function.
Renames utility method.
* Adds a footer text when outbound-call is not feature enabled.
* Fixes comments.
Use it unless the connection is not ACTIVE. We don't really care if it's
recovering or whatever, if it's not active it has problems, so that's that.
This fixes a potential edge case in which the connection remains in RESTORING
state for some time.
* ref(toolbar): show recording features based on explicit configs
* squash: bring back button configs, use final config names
* squash: update interfaceConfig comment, remove unused config whitelist
* squash: change order of button enabled checks to reduce diff
* squash: fileRecording -> fileRecordings
* feat(recording): add sounds for when recording starts and stops
* squash: use constants, play sounds for file only
* squash: rename recordingStopped.mp3 -> recordingOff.mp3
* squash: flip var declaration for alpha order
Layout:
Use an absolute-fill view as the background with the sidebar on top of. This
greatly simplifies styling, as there is no need to calculate how large the
backdrop needs to be.
Animation:
Switch to a translateX transform animation. This serves 2 purposes: first,
there seems to be a bug somewhere in React Native 0.51-0.55 where the content
that is being animated starts to be clipped. Very weird! But more importantly,
translateX transmorm animations are supported by the native animation driver!
https://facebook.github.io/react-native/blog/2017/02/14/using-native-driver-for-animated.html8f5ebe5952/Libraries/Animated/src/NativeAnimatedHelper.js (L138-L176)
This makes the animation more performant and buttery smooth.
Some small cleanups are also included here.
Instead of keeping dominant speaker locally, get it from redux and be
updated when the dominant speaker changes. This is in an attempt to mimic
the video layout being reactified and connected to redux.
The visibility of the toolbar can be toggled by interacting with the main screen.
This change allows the toolbar to be configured to be 'always visible'. This voids
the 'toggle' functionality.
Simplify parts of the logic introduced in
11b7144ad0.
Specificaly, using all the state change avoiding functions doesn't give us much
since we need to copy the state for sure.
Makes sure that whenever a conference is left or switched, the local
participant's id will be equal to the default value.
The problem fixed by this commit is a situation where the local
participant may end up sharing the same ID with it's "ghost" when
rejoining a disconnected conference. The most important and easiest to
hit case is when the conference is left after the CONFERENCE_FAILED
event.
Another rare and harder to encounter in the real world issue is
where CONFERENCE_LEFT may come with the delay due to it's asynchronous
nature. The step by step scenario is as follows: trying to leave a
conference, but the network is not doing well, so it takes time,
requests are timing out. After getting back to the welcome page the
the CONFERENCE_LEFT has not arrived yet. The same conference is joined
again and the load config may timeout, but it will be read from the
cache. Now the network gets better and conference is joining which
results in our ghost participant added to the redux state. At this point
there's the root issue: two participants with the same id, because the
local one was neither cleared nor set to the new one yet
(PARTICIPANT_JOINED come, before CONFERENCE_JOINED where we adjust the
id). Then comes CONFERENCE_JOINED and we try to update our local id.
We're updating the ID of both ghost and local participant. It could be
also that the delayed CONFERENCE_LEFT comes for the old conference, but
it's too late and it would update the id for both participants.
The approach here reasons that the ID of the local participant
may be reset as soon as the local participant and, respectively, her ID
is no longer involved in a recoverable JitsiConference of interest to
the user and, consequently, the app.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
If the ID of a remote participant was the same as the ID of the local
participant (across multiple conferences), removing the remote
participant on PARTICIPANT_LEFT would remove the local participant.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
Like the preceding commit "ref(base/conference): clear the 'conference'
field on WILL_LEAVE", this commit is part of the story how we are to
deal with conferences which take noticeable time to leave.
If a leave is delayed and the leaving JitsiConference manages to sneak a
PARTICIPANT_JOINED in, it may create a remote participant who even
collides with the local participant.
With so many abstractions called conference, I'm not surprised I made a
mistake and my reviewer didn't catch it.
As we are transitioning from remote participants identified by ID alone
to an ID-conference pair, the subsequent commits "Protect against late
PARTICIPANT_JOINED" and "Refine PARTICIPANT_LEFT for ID collisions"
caught the error.
Pawel Domas said:
The conference state field is referring to the current conference in
progress, so it feels like this field should be cleared as soon as we
declare that the conference is being left and the asynchronous process
of leaving the conference starts (which happens on
CONFERENCE_WILL_LEAVE).
Lyubo Marinov said:
Merely setting conference to undefined is incomplete because there are
other redux state properties associated with conference.
What we're doing here is redefining the redux action
CONFERENCE_WILL_LEAVE:
The redux action CONFERENCE_WILL_LEAVE represents the order of the user
to leave a JitsiConference instance. From the user's perspective, there's
no going back (with respect to the instance itself). The app will perform
due clean-up like leaving the associated room, but the instance is no
longer the focus of the attention of the user and, consequently, the app.
Now CONFERENCE_LEFT and CONFERENCE_WILL_LEAVE have more in common than
before and we can do a much better job by expressing the common parts in
source code. Additionally, our source code can be rewritten to better
express the meaning of any of these two actions.
Co-authored-by: Pawel Domas <pawel.domas@jitsi.org>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
Add ability to provide a display name in the configOverwrite object that
when available it will be used to customize the name of the meeting in
callkit screen and recent call list.
Co-authored-by: Daniel Ornelas <daniel.ob64@gmail.com>
Co-authored-by: Lyubo Marinov <lmarinov@atlassian.com>
This zOrder change fixes the issue that the scrollable filmstrip videos
rendered in front of the local participant, however there is still an
issue that needs to be fixed later: The rendered videos should have
overflow: 'hidden' property applied so then they don't get rendered when
scrolled out of the ScrollView, that property however doesn't seem to
work for Video components.
This fix is based on storing the location URL object we are loading the
configuration for in the redux store. Once the config has been loaded (or it has
failed, for that matter!) we'll check if the current "config URL" is the same we
set, and discard the old one if they don't match.
With some of the preceding commits in the "multiplying remote
thumbnails" story line, I started hitting this error with 100%
reproducibility:
1. Have a remote participant prepared in conferenceA. Web will do as
well.
2. On iOS prepare to join conferenceB in Safari and use the same device
for step 3.
3. Join conferenceA on the iOS device from step 2 with audio-only. The
audio-only is so that avatars are always visible. Wait for the remote
participant prepared in step 1 to appear.
4. Switch to Safari and hit "Continue in the app" to have the app leave
conferenceA and join conferenceB.
What happens:
After the iOS device joins conferenceB in the Jitsi Meet app, the local
participant is on the large video (as expected) but the avatar of the
local participant is the default audo-generated auto-colored
placeholder. That's because this error was hit and the avatar couldn't
be "fetched".
The Jitsi Meet app always has at most 1 conference of primary interest.
It may have to juggle with 2 JitsiConference instances at the same time
if 1 is in the process of being left and one is joining/joined. But the
one which is joining or joined (which we call conference in the
features/base/conference redux state) is the one "of interest", the
other one is "clean up". Consequently, the remote participants of the
conference "of interest" are the remote participants "of interest" and
the others are "clean up". In order to reduce the time during which
there may be multiplying remote thumbnails, clean the remote
participants who are no longer "of interest" up.
As part of the work on fixing the problem with the multiplying
thumbnails, we've associated remote participant w/ JitsiConference.
However, there are periods of time when multiple JitsiConferences are in
the redux state (and that period is going to be shorted by
StateListenerRegistry). In order to give more control to the feature
base/participants, reduce the occurrences of direct access to the
features/base/participants redux state and utilize the feature's
existing read access functions. Which will allow us in the future to
enhance these functions to access participants which are relevant to the
current conference of interest to the user only.
The commit message of "Associate remote participant w/ JitsiConference
(_JOINED)" explains the motivation for this commit.
Practically, _JOINED and _LEFT combined with "Remove remote participants
who are no longer of interest" should alleviate the problem with
multiplying remote participants to an acceptable level of annoyance.
Technically though, a remote participant cannot be identified by an ID
only. The ID is (somewhat) "unique" in the context of a single
JitsiConference instance. So in order to not have to scratch our heads
over an obscure corner, racing case, it's better to always identify
remote participants by the pair id-conference. Unfortunately, that's a
bit of a high order given the existing source code. So I've implemented
the cases which are the easiest so that new source code written with
participantUpdated is more likely to identify a remote participant with
the pair id-conference.
Additionally, the commit "Reduce direct read access to the
features/base/participants redux state" brings more control back to the
functions of the feature base/participants so that one day we can (if we
choose to) do something like, for example:
If getParticipants is called with a conference, it returns the
participants from features/base/participants who are associated with the
specified conference. If no conference is specified in the function
call, then default to the conference which is the primary focus of the
app at the time of the function call. Added to the above, this should
allow us to further reduce the cases in which we're identifying remote
participants by id only and get us even closer to a more "predictable"
behavior in corner, racing cases.
The plan set in motion here is to associate remote participants with the
JitsiConference instances that created them in order to be able to
remove remote participants when a JitsiConference is no longer the
primary focus of the jitsi-meet app. And that's supposed to alleviate a
problem with multiplying remote thumbnails.
Doing all of the above in a single commit is a bit of a high order. So
I'm splitting the whole into multiple successive commits for the
purposes of observability, comprehension. Each commit is supposed to be
safe even if subsequent commits are not accepted, are reverted,
whatever. Obviously, without the successive commits, a commit may be
"unused".
One of the important pieces of the multiplying remote thumbnails "fix"
offered is removing remote participants who are no longer of interest
i.e. PARTICIPANT_LEFT. But in order for _LEFT to be implemented, _JOINED
must be implemented first.
Because a conference can fail before or after it's joined it must be
"left" in order to release any allocated resources like peerconnections,
tracks and all the other things.
- add 10px of padding on the sizes of the toolbar
- make the button margin smaller (from 10 to 7)
- increate the secondary button factor to 85%, thus rising the maximum secondary
button size to 50 (from the previous 48)
Doing so in CONFERENCE_JOINED is too late because if we are moderators that
event will come first and we won't know what ID to match it with.
This is safe because our local ID is created early.
* feat(recording): frontend logic can support live streaming and recording
Instead of either live streaming or recording, now both can live together. The
changes to facilitate such include the following:
- Killing the state storing in Recording.js. Instead state is stored in the lib
and updated in redux for labels to display the necessary state updates.
- Creating a new container, Labels, for recording labels. Previously labels were
manually created and positioned. The container can create a reasonable number
of labels and only the container itself needs to be positioned with CSS. The
VideoQualityLabel has been shoved into the container as well because it moves
along with the recording labels.
- The action for updating recording state has been modified to enable updating
an array of recording sessions to support having multiple sessions.
- Confirmation dialogs for stopping and starting a file recording session have
been created, as they previously were jquery modals opened by Recording.js.
- Toolbox.web displays live streaming and recording buttons based on
configuration instead of recording availability.
- VideoQualityLabel and RecordingLabel have been simplified to remove any
positioning logic, as the Labels container handles such.
- Previous recording state update logic has been moved into the RecordingLabel
component. Each RecordingLabel is in charge of displaying state for a
recording session. The display UX has been left alone.
- Sipgw availability is no longer broadcast so remove logic depending on its
state. Some moving around of code was necessary to get around linting errors
about the existing code being too deeply nested (even though I didn't touch
it).
* work around lib-jitsi-meet circular dependency issues
* refactor labels to use html base
* pass in translation keys to video quality label
* add video quality classnames for torture tests
* break up, rearrange recorder session update listener
* add comment about disabling startup resize animation
* rename session to sessionData
* chore(deps): update to latest lib for recording changes
Contributing all buttons in one place goes against the designs that we
set out at the beginning of the project's rewrite and that multiple of
us have been following since then.
Leonard Kim
Bettenbuk Zoltan
Saúl Ibarra Corretgé
damencho
virtuacoplenny
mmoanis
Hristo Terezov
Lars Spaenij
Pratik Shah
bgrozev
Leonard Kim
Lyubo Marinov
paweldomas
yanas
linkmauve
Nik
Saúl Ibarra Corretgé
Ritwik Heda
Radium Zheng
Nik
Praveen Gupta
Pablo Saavedra
bbaldino
Daniel Ornelas
Guus der Kinderen