kicad/pcbnew/netinfo_list.cpp

258 lines
6.5 KiB
C++
Raw Normal View History

/*
* This program source code file is part of KiCad, a free EDA CAD application.
*
* Copyright (C) 1992-2014 KiCad Developers, see AUTHORS.txt for contributors.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
#include <fctsys.h>
#include <gr_basic.h>
#include <common.h>
#include <macros.h>
#include <pcbnew.h>
#include <class_board.h>
#include <class_module.h>
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
#include <class_pad.h>
#include <class_track.h>
#include <class_zone.h>
2018-01-30 14:34:09 +00:00
#include <netinfo.h>
// Constructor and destructor
Changed the way of looking up NETINFO_ITEM using net names (using boost::unordered_map). Added a hash function (wxString) for that. Introduced NETINFO_ITEM::GetNetItem( wxString ). BOARD::FindNet() uses the map. Net codes are updated upon net list update. (BOARD::ReplaceNetlist()) Added in some places (mostly class_board.cpp) pad->SetNet() calls to synchronize net codes. On creation of NETINFO_LIST, the first NETINFO_ITEM is added (the unconnected items net). Removed COMPONENT_NET::m_netNumber, as it was not used anywhere. Added an assert to D_PAD::GetNetname(), checking if net code and net name is consistent for unconnected pads. Added an assert for NETINFO_LIST::AppendNet() to assure that appended nets are unique. It seems that at this point: - Updating net lists works fine. The only difference between the file ouput is that after changes it contains empty nets as well. - Nets are not saved in the lexical order. Still, net names and net codes are properly assigned to all items in the .kicad_pcb file. It is going to be addressed in the next commit. I believe it should not create any problems, as pads are sorted by their net names anyway (NETINFO_LIST::buildPadsFullList()) Performed tests: - Created a blank PCB, saved as pic_programmer.kicad_pcb (from demos folder). Updated net lists. .kicad_pcb file (comparing to the results from master branch) differ with net order (as mentioned before), net codes and timestamps. - Removed some of components from the above .kicad_pcb file and updated net lists. Modules reappeared. .kicad_pcb file differs in the same way as described above. - Trying to change a pad net name (via properties dialog) results in assert being fired. It is done on purpose (as there is a call to GetNetname() and net name and net code do not match). This will not happen after the next commit. - Prepared a simple project (starting with schematics). Imported net list, changed schematic, reimported net list - changes are applied. - Eagle & KiCad legacy boards seem to load without any problem.
2014-01-10 17:04:07 +00:00
NETINFO_LIST::NETINFO_LIST( BOARD* aParent ) : m_Parent( aParent )
{
Changed the way of looking up NETINFO_ITEM using net names (using boost::unordered_map). Added a hash function (wxString) for that. Introduced NETINFO_ITEM::GetNetItem( wxString ). BOARD::FindNet() uses the map. Net codes are updated upon net list update. (BOARD::ReplaceNetlist()) Added in some places (mostly class_board.cpp) pad->SetNet() calls to synchronize net codes. On creation of NETINFO_LIST, the first NETINFO_ITEM is added (the unconnected items net). Removed COMPONENT_NET::m_netNumber, as it was not used anywhere. Added an assert to D_PAD::GetNetname(), checking if net code and net name is consistent for unconnected pads. Added an assert for NETINFO_LIST::AppendNet() to assure that appended nets are unique. It seems that at this point: - Updating net lists works fine. The only difference between the file ouput is that after changes it contains empty nets as well. - Nets are not saved in the lexical order. Still, net names and net codes are properly assigned to all items in the .kicad_pcb file. It is going to be addressed in the next commit. I believe it should not create any problems, as pads are sorted by their net names anyway (NETINFO_LIST::buildPadsFullList()) Performed tests: - Created a blank PCB, saved as pic_programmer.kicad_pcb (from demos folder). Updated net lists. .kicad_pcb file (comparing to the results from master branch) differ with net order (as mentioned before), net codes and timestamps. - Removed some of components from the above .kicad_pcb file and updated net lists. Modules reappeared. .kicad_pcb file differs in the same way as described above. - Trying to change a pad net name (via properties dialog) results in assert being fired. It is done on purpose (as there is a call to GetNetname() and net name and net code do not match). This will not happen after the next commit. - Prepared a simple project (starting with schematics). Imported net list, changed schematic, reimported net list - changes are applied. - Eagle & KiCad legacy boards seem to load without any problem.
2014-01-10 17:04:07 +00:00
// Make sure that the unconnected net has number 0
AppendNet( new NETINFO_ITEM( aParent, wxEmptyString, 0 ) );
m_newNetCode = 0;
}
NETINFO_LIST::~NETINFO_LIST()
{
clear();
}
void NETINFO_LIST::clear()
{
NETNAMES_MAP::iterator it, itEnd;
for( it = m_netNames.begin(), itEnd = m_netNames.end(); it != itEnd; ++it )
delete it->second;
Changed the way of looking up NETINFO_ITEM using net names (using boost::unordered_map). Added a hash function (wxString) for that. Introduced NETINFO_ITEM::GetNetItem( wxString ). BOARD::FindNet() uses the map. Net codes are updated upon net list update. (BOARD::ReplaceNetlist()) Added in some places (mostly class_board.cpp) pad->SetNet() calls to synchronize net codes. On creation of NETINFO_LIST, the first NETINFO_ITEM is added (the unconnected items net). Removed COMPONENT_NET::m_netNumber, as it was not used anywhere. Added an assert to D_PAD::GetNetname(), checking if net code and net name is consistent for unconnected pads. Added an assert for NETINFO_LIST::AppendNet() to assure that appended nets are unique. It seems that at this point: - Updating net lists works fine. The only difference between the file ouput is that after changes it contains empty nets as well. - Nets are not saved in the lexical order. Still, net names and net codes are properly assigned to all items in the .kicad_pcb file. It is going to be addressed in the next commit. I believe it should not create any problems, as pads are sorted by their net names anyway (NETINFO_LIST::buildPadsFullList()) Performed tests: - Created a blank PCB, saved as pic_programmer.kicad_pcb (from demos folder). Updated net lists. .kicad_pcb file (comparing to the results from master branch) differ with net order (as mentioned before), net codes and timestamps. - Removed some of components from the above .kicad_pcb file and updated net lists. Modules reappeared. .kicad_pcb file differs in the same way as described above. - Trying to change a pad net name (via properties dialog) results in assert being fired. It is done on purpose (as there is a call to GetNetname() and net name and net code do not match). This will not happen after the next commit. - Prepared a simple project (starting with schematics). Imported net list, changed schematic, reimported net list - changes are applied. - Eagle & KiCad legacy boards seem to load without any problem.
2014-01-10 17:04:07 +00:00
m_netNames.clear();
m_netCodes.clear();
m_newNetCode = 0;
}
NETINFO_ITEM* NETINFO_LIST::GetNetItem( int aNetCode ) const
{
NETCODES_MAP::const_iterator result = m_netCodes.find( aNetCode );
if( result != m_netCodes.end() )
return (*result).second;
return NULL;
}
NETINFO_ITEM* NETINFO_LIST::GetNetItem( const wxString& aNetName ) const
{
NETNAMES_MAP::const_iterator result = m_netNames.find( aNetName );
if( result != m_netNames.end() )
return (*result).second;
return NULL;
}
void NETINFO_LIST::RemoveNet( NETINFO_ITEM* aNet )
{
for( NETCODES_MAP::iterator i = m_netCodes.begin(); i != m_netCodes.end(); ++i )
{
if ( i->second == aNet )
{
m_netCodes.erase(i);
break;
}
}
for( NETNAMES_MAP::iterator i = m_netNames.begin(); i != m_netNames.end(); ++i )
{
if ( i->second == aNet )
{
m_netNames.erase(i);
break;
}
}
m_newNetCode = std::min( m_newNetCode, aNet->m_NetCode - 1 );
}
void NETINFO_LIST::RemoveUnusedNets()
{
NETCODES_MAP existingNets = m_netCodes;
m_netCodes.clear();
m_netNames.clear();
for( std::pair<const int, NETINFO_ITEM*> item : existingNets )
{
if( item.second->IsCurrent() )
{
m_netNames.insert( std::make_pair( item.second->GetNetname(), item.second ) );
m_netCodes.insert( std::make_pair( item.first, item.second ) );
}
}
}
2009-06-06 18:08:49 +00:00
void NETINFO_LIST::AppendNet( NETINFO_ITEM* aNewElement )
{
// if there is a net with such name then just assign the correct number
NETINFO_ITEM* sameName = GetNetItem( aNewElement->GetNetname() );
if( sameName != NULL )
{
aNewElement->m_NetCode = sameName->GetNet();
return;
}
// be sure that net codes are consecutive
// negative net code means that it has to be auto assigned
else if( ( aNewElement->m_NetCode != (int) m_netCodes.size() ) || ( aNewElement->m_NetCode < 0 ) )
{
aNewElement->m_NetCode = getFreeNetCode();
}
Changed the way of looking up NETINFO_ITEM using net names (using boost::unordered_map). Added a hash function (wxString) for that. Introduced NETINFO_ITEM::GetNetItem( wxString ). BOARD::FindNet() uses the map. Net codes are updated upon net list update. (BOARD::ReplaceNetlist()) Added in some places (mostly class_board.cpp) pad->SetNet() calls to synchronize net codes. On creation of NETINFO_LIST, the first NETINFO_ITEM is added (the unconnected items net). Removed COMPONENT_NET::m_netNumber, as it was not used anywhere. Added an assert to D_PAD::GetNetname(), checking if net code and net name is consistent for unconnected pads. Added an assert for NETINFO_LIST::AppendNet() to assure that appended nets are unique. It seems that at this point: - Updating net lists works fine. The only difference between the file ouput is that after changes it contains empty nets as well. - Nets are not saved in the lexical order. Still, net names and net codes are properly assigned to all items in the .kicad_pcb file. It is going to be addressed in the next commit. I believe it should not create any problems, as pads are sorted by their net names anyway (NETINFO_LIST::buildPadsFullList()) Performed tests: - Created a blank PCB, saved as pic_programmer.kicad_pcb (from demos folder). Updated net lists. .kicad_pcb file (comparing to the results from master branch) differ with net order (as mentioned before), net codes and timestamps. - Removed some of components from the above .kicad_pcb file and updated net lists. Modules reappeared. .kicad_pcb file differs in the same way as described above. - Trying to change a pad net name (via properties dialog) results in assert being fired. It is done on purpose (as there is a call to GetNetname() and net name and net code do not match). This will not happen after the next commit. - Prepared a simple project (starting with schematics). Imported net list, changed schematic, reimported net list - changes are applied. - Eagle & KiCad legacy boards seem to load without any problem.
2014-01-10 17:04:07 +00:00
// net names & codes are supposed to be unique
assert( GetNetItem( aNewElement->GetNetname() ) == NULL );
assert( GetNetItem( aNewElement->GetNet() ) == NULL );
// add an entry for fast look up by a net name using a map
m_netNames.insert( std::make_pair( aNewElement->GetNetname(), aNewElement ) );
m_netCodes.insert( std::make_pair( aNewElement->GetNet(), aNewElement ) );
}
void NETINFO_LIST::buildListOfNets()
{
// Restore the initial state of NETINFO_ITEMs
for( NETINFO_ITEM* net : *this )
net->Clear();
2009-08-17 02:59:38 +00:00
m_Parent->SynchronizeNetsAndNetClasses( );
m_Parent->SetAreasNetCodesFromNetNames();
}
#if defined(DEBUG)
void NETINFO_LIST::Show() const
{
int i = 0;
NETNAMES_MAP::const_iterator it, itEnd;
for( it = m_netNames.begin(), itEnd = m_netNames.end(); it != itEnd; ++it )
{
printf( "[%d]: netcode:%d netname:<%s>\n",
i++,
it->second->GetNet(),
TO_UTF8( it->second->GetNetname() ) );
}
}
#endif
int NETINFO_LIST::getFreeNetCode()
{
do {
if( m_newNetCode < 0 )
m_newNetCode = 0;
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
} while( m_netCodes.count( ++m_newNetCode ) != 0 );
return m_newNetCode;
}
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
int NETINFO_MAPPING::Translate( int aNetCode ) const
{
std::map<int, int>::const_iterator value = m_netMapping.find( aNetCode );
if( value != m_netMapping.end() )
return value->second;
// There was no entry for the given net code
return aNetCode;
}
void NETINFO_MAPPING::Update()
{
// Collect all the used nets
std::set<int> nets;
// Be sure that the unconnected gets 0 and is mapped as 0
nets.insert( 0 );
// Zones
for( int i = 0; i < m_board->GetAreaCount(); ++i )
nets.insert( m_board->GetArea( i )->GetNetCode() );
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
// Tracks
2019-05-31 02:30:28 +00:00
for( auto track : m_board->Tracks() )
nets.insert( track->GetNetCode() );
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
// Modules/pads
for( auto module : m_board->Modules() )
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
{
2019-06-01 23:23:36 +00:00
for( auto pad : module->Pads() )
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
{
nets.insert( pad->GetNetCode() );
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
}
}
// Prepare the new mapping
m_netMapping.clear();
// Now the nets variable stores all the used net codes (not only for pads) and we are ready to
// assign new consecutive net numbers
Added NETINFO_MAPPING, to ease saving nets with consecutive net codes (without modifying the net codes during the run time). Now, nets are saved with consecutive net codes (both modern & legacy plugins). Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp). Performed tests: - Changed a pad's net name from empty to existent - ok, name was changed. - Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty. - Changed a pad's net name from existent to empty - ok, net name became empty - Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed. - Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled. - Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes). - KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications). - A few boards were also saved using the legacy format and were opened with the master KiCad without any issues. - Change a net name for a pad, restore with undo/redo - ok - Remove everything, restore with undo - ok - Remove everything, reload netlist - ok Differences observed between files saved by the master branch KiCad and this one: - list of nets are not saved in any particular order, so net codes may differ - the default net class does not contain the unconnected net
2014-01-28 09:19:51 +00:00
int newNetCode = 0;
for( std::set<int>::const_iterator it = nets.begin(), itEnd = nets.end(); it != itEnd; ++it )
m_netMapping[*it] = newNetCode++;
}
NETINFO_ITEM* NETINFO_MAPPING::iterator::operator*() const
{
return m_mapping->m_board->FindNet( m_iterator->first );
}
NETINFO_ITEM* NETINFO_MAPPING::iterator::operator->() const
{
return m_mapping->m_board->FindNet( m_iterator->first );
}
const int NETINFO_LIST::UNCONNECTED = 0;
const int NETINFO_LIST::ORPHANED = -1;