kicad/pcbnew/tools/drc.h

455 lines
20 KiB
C
Raw Normal View History

2007-11-27 01:34:35 +00:00
/*
* This program source code file is part of KiCad, a free EDA CAD application.
2007-11-27 01:34:35 +00:00
*
* Copyright (C) 2007-2016 Dick Hollenbeck, dick@softplc.com
2019-06-04 10:45:43 +00:00
* Copyright (C) 2017-2019 KiCad Developers, see change_log.txt for contributors.
2007-11-27 01:34:35 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you may find one here:
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
* or you may search the http://www.gnu.org website for the version 2 license,
* or you may write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
*/
2018-01-28 21:02:31 +00:00
#ifndef DRC_H
#define DRC_H
2007-11-27 01:34:35 +00:00
2019-05-31 02:30:28 +00:00
#include <class_board.h>
#include <class_track.h>
#include <geometry/seg.h>
#include <geometry/shape_poly_set.h>
2019-05-31 02:30:28 +00:00
#include <memory>
#include <vector>
#include <tools/pcb_tool_base.h>
#include <drc/drc_marker_factory.h>
#define OK_DRC 0
#define BAD_DRC 1
2007-12-01 03:42:52 +00:00
2007-11-27 01:34:35 +00:00
// DRC error codes could be defined by an enum.
// however a #define is used because error code value is displayed in DRC messages,
// and using #define that shows each numerical value helps for debug.
2007-12-01 03:42:52 +00:00
/// DRC error codes:
#define DRCE_ 1 // not used yet
2017-03-22 15:47:15 +00:00
#define DRCE_UNCONNECTED_ITEMS 2 ///< items are unconnected
#define DRCE_TRACK_NEAR_THROUGH_HOLE 3 ///< thru hole is too close to track
#define DRCE_TRACK_NEAR_PAD 4 ///< pad too close to track
#define DRCE_TRACK_NEAR_VIA 5 ///< track too close to via
#define DRCE_VIA_NEAR_VIA 6 ///< via too close to via
#define DRCE_VIA_NEAR_TRACK 7 ///< via too close to track
#define DRCE_TRACK_ENDS1 8 ///< 2 parallel track segments too close: fine start point test
#define DRCE_TRACK_ENDS2 9 ///< 2 parallel track segments too close: fine start point test
#define DRCE_TRACK_ENDS3 10 ///< 2 parallel track segments too close: fine end point test
#define DRCE_TRACK_ENDS4 11 ///< 2 parallel track segments too close: fine end point test
#define DRCE_TRACK_SEGMENTS_TOO_CLOSE 12 ///< 2 parallel track segments too close: segm ends between segref ends
#define DRCE_TRACKS_CROSSING 13 ///< tracks are crossing
#define DRCE_ENDS_PROBLEM1 14 ///< track ends are too close
#define DRCE_ENDS_PROBLEM2 15 ///< track ends are too close
#define DRCE_ENDS_PROBLEM3 16 ///< track ends are too close
#define DRCE_ENDS_PROBLEM4 17 ///< track ends are too close
#define DRCE_ENDS_PROBLEM5 18 ///< track ends are too close
#define DRCE_PAD_NEAR_PAD1 19 ///< pad too close to pad
#define DRCE_VIA_HOLE_BIGGER 20 ///< via's hole is bigger than its diameter
#define DRCE_MICRO_VIA_INCORRECT_LAYER_PAIR 21 ///< micro via's layer pair incorrect (layers must be adjacent)
#define DRCE_ZONES_INTERSECT 22 ///< copper area outlines intersect
#define DRCE_ZONES_TOO_CLOSE 23 ///< copper area outlines are too close
#define DRCE_SUSPICIOUS_NET_FOR_ZONE_OUTLINE 24 ///< copper area has a net but no pads in nets, which is suspicious
#define DRCE_HOLE_NEAR_PAD 25 ///< hole too close to pad
#define DRCE_HOLE_NEAR_TRACK 26 ///< hole too close to track
#define DRCE_TOO_SMALL_TRACK_WIDTH 27 ///< Too small track width
#define DRCE_TOO_SMALL_VIA 28 ///< Too small via size
#define DRCE_TOO_SMALL_MICROVIA 29 ///< Too small micro via size
#define DRCE_TOO_SMALL_VIA_DRILL 30 ///< Too small via drill
#define DRCE_TOO_SMALL_MICROVIA_DRILL 31 ///< Too small micro via drill
#define DRCE_NETCLASS_TRACKWIDTH 32 ///< netclass has TrackWidth < board.m_designSettings->m_TrackMinWidth
#define DRCE_NETCLASS_CLEARANCE 33 ///< netclass has Clearance < board.m_designSettings->m_TrackClearance
#define DRCE_NETCLASS_VIASIZE 34 ///< netclass has ViaSize < board.m_designSettings->m_ViasMinSize
#define DRCE_NETCLASS_VIADRILLSIZE 35 ///< netclass has ViaDrillSize < board.m_designSettings->m_ViasMinDrill
#define DRCE_NETCLASS_uVIASIZE 36 ///< netclass has ViaSize < board.m_designSettings->m_MicroViasMinSize
#define DRCE_NETCLASS_uVIADRILLSIZE 37 ///< netclass has ViaSize < board.m_designSettings->m_MicroViasMinDrill
#define DRCE_VIA_INSIDE_KEEPOUT 38 ///< Via in inside a keepout area
#define DRCE_TRACK_INSIDE_KEEPOUT 39 ///< Track in inside a keepout area
#define DRCE_PAD_INSIDE_KEEPOUT 40 ///< Pad in inside a keepout area
#define DRCE_TRACK_NEAR_COPPER 41 ///< track & copper graphic collide or are too close
#define DRCE_VIA_NEAR_COPPER 42 ///< via and copper graphic collide or are too close
#define DRCE_PAD_NEAR_COPPER 43 ///< pad and copper graphic collide or are too close
#define DRCE_TRACK_NEAR_ZONE 44 ///< track & zone collide or are too close together
#define DRCE_OVERLAPPING_FOOTPRINTS 45 ///< footprint courtyards overlap
#define DRCE_MISSING_COURTYARD_IN_FOOTPRINT 46 ///< footprint has no courtyard defined
#define DRCE_MALFORMED_COURTYARD_IN_FOOTPRINT 47 ///< footprint has a courtyard but malformed
///< (not convertible to a closed polygon with holes)
#define DRCE_MICRO_VIA_NOT_ALLOWED 48 ///< micro vias are not allowed
#define DRCE_BURIED_VIA_NOT_ALLOWED 49 ///< buried vias are not allowed
#define DRCE_DISABLED_LAYER_ITEM 50 ///< item on a disabled layer
#define DRCE_DRILLED_HOLES_TOO_CLOSE 51 ///< overlapping drilled holes break drill bits
#define DRCE_TRACK_NEAR_EDGE 53 ///< track too close to board edge
#define DRCE_INVALID_OUTLINE 54 ///< invalid board outline
#define DRCE_MISSING_FOOTPRINT 55 ///< footprint not found for netlist item
#define DRCE_DUPLICATE_FOOTPRINT 56 ///< more than one footprints found for netlist item
#define DRCE_EXTRA_FOOTPRINT 57 ///< netlist item not found for footprint
2007-11-27 01:34:35 +00:00
#define DRCE_SHORT 58
#define DRCE_REDUNDANT_VIA 59
#define DRCE_DUPLICATE_TRACK 60
#define DRCE_MERGE_TRACKS 61
#define DRCE_DANGLING_TRACK 62
#define DRCE_DANGLING_VIA 63
#define DRCE_ZERO_LENGTH_TRACK 64
#define DRCE_TRACK_IN_PAD 65
2007-11-27 01:34:35 +00:00
class PCB_EDIT_FRAME;
class DIALOG_DRC_CONTROL;
class BOARD_ITEM;
class BOARD;
class D_PAD;
class ZONE_CONTAINER;
class TRACK;
class MARKER_PCB;
class DRC_ITEM;
class NETCLASS;
class EDA_TEXT;
class DRAWSEGMENT;
class NETLIST;
class wxWindow;
class wxString;
class wxTextCtrl;
2007-11-27 01:34:35 +00:00
2007-12-03 05:14:51 +00:00
/**
* Provide an abstract interface of a DRC_ITEM* list manager. The details
2007-12-03 05:14:51 +00:00
* of the actual list architecture are hidden from the caller. Any class
* that implements this interface can then be used by a DRCLISTBOX class without
* it knowing the actual architecture of the list.
*/
class DRC_ITEM_LIST
{
public:
/**
* Function DeleteAllItems
* removes and deletes all the items in the list.
*/
virtual void DeleteAllItems() = 0;
2007-12-03 05:14:51 +00:00
/**
* Function GetItem
* retrieves a DRC_ITEM by pointer. The actual item remains owned by the
* list container.
* @param aIndex The 0 based index into the list of the desired item.
* @return const DRC_ITEM* - the desired item or NULL if aIndex is out of range.
*/
virtual const DRC_ITEM* GetItem( int aIndex ) = 0;
2007-12-03 05:14:51 +00:00
/**
* Function DeleteAllItems
* removes and deletes desired item from the list.
* @param aIndex The 0 based index into the list of the desired item which
2007-12-03 05:14:51 +00:00
* is to be deleted.
*/
virtual void DeleteItem( int aIndex ) = 0;
2007-12-03 05:14:51 +00:00
/**
* Function GetCount
* returns the number of items in the list.
*/
virtual int GetCount() = 0;
virtual ~DRC_ITEM_LIST() { }
2007-12-03 05:14:51 +00:00
};
typedef std::vector<DRC_ITEM*> DRC_LIST;
2007-12-04 18:23:38 +00:00
2007-12-03 05:14:51 +00:00
2007-11-27 01:34:35 +00:00
/**
* Design Rule Checker object that performs all the DRC tests. The output of
2007-12-01 03:42:52 +00:00
* the checking goes to the BOARD file in the form of two MARKER lists. Those
* two lists are displayable in the drc dialog box. And they can optionally
* be sent to a text file on disk.
* This class is given access to the windows and the BOARD
* that it needs via its constructor or public access functions.
*/
class DRC : public PCB_TOOL_BASE
2007-11-27 01:34:35 +00:00
{
friend class DIALOG_DRC_CONTROL;
public:
DRC();
~DRC();
/// @copydoc TOOL_INTERACTIVE::Reset()
void Reset( RESET_REASON aReason ) override;
2007-12-01 03:42:52 +00:00
private:
2007-12-01 03:42:52 +00:00
// protected or private functions() are lowercase first character.
bool m_doPad2PadTest; // enable pad to pad clearance tests
bool m_doUnconnectedTest; // enable unconnected tests
bool m_doZonesTest; // enable zone to items clearance tests
bool m_doKeepoutTest; // enable keepout areas to items clearance tests
bool m_doCreateRptFile; // enable creating a report file
bool m_refillZones; // refill zones if requested (by user).
bool m_reportAllTrackErrors; // Report all tracks errors (or only 4 first errors)
bool m_testFootprints; // Test footprints against schematic
wxString m_rptFilename;
MARKER_PCB* m_currentMarker;
/* In DRC functions, many calculations are using coordinates relative
* to the position of the segment under test (segm to segm DRC, segm to pad DRC
* Next variables store coordinates relative to the start point of this segment
*/
wxPoint m_padToTestPos; // Position of the pad to compare in drc test segm to pad or pad to pad
wxPoint m_segmEnd; // End point of the reference segment (start point = (0,0) )
/* Some functions are comparing the ref segm to pads or others segments using
* coordinates relative to the ref segment considered as the X axis
* so we store the ref segment length (the end point relative to these axis)
* and the segment orientation (used to rotate other coordinates)
*/
double m_segmAngle; // Ref segm orientation in 0,1 degre
int m_segmLength; // length of the reference segment
/* variables used in checkLine to test DRC segm to segm:
* define the area relative to the ref segment that does not contains any other segment
*/
2010-09-19 17:44:46 +00:00
int m_xcliplo;
int m_ycliplo;
int m_xcliphi;
int m_ycliphi;
PCB_EDIT_FRAME* m_pcbEditorFrame; ///< The pcb frame editor which owns the board
BOARD* m_pcb;
SHAPE_POLY_SET m_board_outlines; ///< The board outline including cutouts
DIALOG_DRC_CONTROL* m_drcDialog;
2019-06-04 10:45:43 +00:00
DRC_MARKER_FACTORY m_markerFactory; ///< Class that generates markers
DRC_LIST m_unconnected; ///< list of unconnected pads, as DRC_ITEMs
DRC_LIST m_footprints; ///< list of footprint warnings, as DRC_ITEMs
bool m_drcRun;
bool m_footprintsTested;
///> Sets up handlers for various events.
void setTransitions() override;
/**
* Update needed pointers from the one pointer which is known not to change.
2007-12-01 03:42:52 +00:00
*/
void updatePointers();
/**
* Adds a DRC marker to the PCB through the COMMIT mechanism.
*/
2017-03-03 19:26:18 +00:00
void addMarkerToPcb( MARKER_PCB* aMarker );
//-----<categorical group tests>-----------------------------------------
2009-09-10 15:22:26 +00:00
/**
* Go through each NETCLASS and verifies that its clearance, via size, track width, and
* track clearance are larger than those in board.m_designSettings.
2009-09-10 15:22:26 +00:00
* This is necessary because the actual DRC checks are run against the NETCLASS
* limits, so in order enforce global limits, we first check the NETCLASSes against
* the global limits.
* @return bool - true if succes, else false but only after
* reporting _all_ NETCLASS violations.
*/
bool testNetClasses();
2009-09-10 15:22:26 +00:00
/**
* Perform the DRC on all tracks.
*
* This test can take a while, a progress bar can be displayed
* @param aActiveWindow = the active window ued as parent for the progress bar
* @param aShowProgressBar = true to show a progress bar
* (Note: it is shown only if there are many tracks)
*/
void testTracks( wxWindow * aActiveWindow, bool aShowProgressBar );
void testPad2Pad();
void testDrilledHoles();
void testUnconnected();
2007-12-01 03:42:52 +00:00
void testZones();
void testKeepoutAreas();
// aTextItem is type BOARD_ITEM* to accept either TEXTE_PCB or TEXTE_MODULE
void testCopperTextItem( BOARD_ITEM* aTextItem );
void testCopperDrawItem( DRAWSEGMENT* aDrawing );
void testCopperTextAndGraphics();
///> Tests for items placed on disabled layers (causing false connections).
void testDisabledLayers();
/**
* Test that the board outline is contiguous and composed of valid elements
*/
void testOutline();
//-----<single "item" tests>-----------------------------------------
2007-12-01 03:42:52 +00:00
bool doNetClass( const std::shared_ptr<NETCLASS>& aNetClass, wxString& msg );
2009-09-10 15:22:26 +00:00
2007-12-01 03:42:52 +00:00
/**
* Test the clearance between aRefPad and other pads.
*
2007-12-01 03:42:52 +00:00
* The pad list must be sorted by x coordinate.
*
* @param aRefPad is the pad to test
* @param aStart is the first pad of the list to test against aRefPad
* @param aEnd is the end of the list and is not included
* @param x_limit is used to stop the test
* (i.e. when the current pad pos X in list exceeds this limit, because the list
* is sorted by X coordinate)
2007-12-01 03:42:52 +00:00
*/
bool doPadToPadsDrc( D_PAD* aRefPad, D_PAD** aStart, D_PAD** aEnd, int x_limit );
2007-12-01 03:42:52 +00:00
/**
* Test the current segment.
*
2007-12-01 03:42:52 +00:00
* @param aRefSeg The segment to test
2019-05-31 02:30:28 +00:00
* @param aStartIt the iterator to the first track to test
* @param aEndIt the marker for the iterator end
* @param aTestZones true if should do copper zones test. This can be very time consumming
* @return bool - true if no problems, else false and m_currentMarker is
2007-12-01 03:42:52 +00:00
* filled in with the problem information.
*/
2019-05-31 02:30:28 +00:00
bool doTrackDrc( TRACK* aRefSeg, TRACKS::iterator aStartIt, TRACKS::iterator aEndIt,
bool aTestZones );
/**
* Test for footprint courtyard overlaps.
*/
void doFootprintOverlappingDrc();
2007-12-01 03:42:52 +00:00
//-----<single tests>----------------------------------------------
/**
* @param aRefPad The reference pad to check
* @param aPad Another pad to check against
* @return bool - true if clearance between aRefPad and aPad is >= dist_min, else false
2007-12-01 03:42:52 +00:00
*/
bool checkClearancePadToPad( D_PAD* aRefPad, D_PAD* aPad );
2007-12-01 03:42:52 +00:00
/**
* Check the distance from a pad to segment. This function uses several
2007-12-01 03:42:52 +00:00
* instance variable not passed in:
* m_segmLength = length of the segment being tested
* m_segmAngle = angle of the segment with the X axis;
* m_segmEnd = end coordinate of the segment
* m_padToTestPos = position of pad relative to the origin of segment
* @param aPad Is the pad involved in the check
* @param aSegmentWidth width of the segment to test
* @param aMinDist Is the minimum clearance needed
2007-12-01 03:42:52 +00:00
*
* @return true distance >= dist_min,
* false if distance < dist_min
2007-12-01 03:42:52 +00:00
*/
bool checkClearanceSegmToPad( const D_PAD* aPad, int aSegmentWidth, int aMinDist );
2007-12-01 03:42:52 +00:00
/**
2016-04-06 18:15:49 +00:00
* Check the distance from a point to a segment.
*
2016-04-06 18:15:49 +00:00
* The segment is expected starting at 0,0, and on the X axis
2010-09-19 17:44:46 +00:00
* (used to test DRC between a segment and a round pad, via or round end of a track
* @param aCentre The coordinate of the circle's center
* @param aRadius A "keep out" radius centered over the circle
2016-04-06 18:15:49 +00:00
* @param aLength The length of the segment (i.e. coordinate of end, because it is on
* the X axis)
2007-12-01 03:42:52 +00:00
* @return bool - true if distance >= radius, else
2010-09-19 17:44:46 +00:00
* false when distance < aRadius
2007-12-01 03:42:52 +00:00
*/
2010-09-19 17:44:46 +00:00
static bool checkMarginToCircle( wxPoint aCentre, int aRadius, int aLength );
2007-12-01 03:42:52 +00:00
2007-12-01 03:42:52 +00:00
/**
* Function checkLine
* (helper function used in drc calculations to see if one track is in contact with
* another track).
2010-09-19 17:44:46 +00:00
* Test if a line intersects a bounding box (a rectangle)
* The rectangle is defined by m_xcliplo, m_ycliplo and m_xcliphi, m_ycliphi
* return true if the line from aSegStart to aSegEnd is outside the bounding box
2007-12-01 03:42:52 +00:00
*/
2019-06-04 10:45:43 +00:00
bool checkLine( wxPoint aSegStart, wxPoint aSegEnd );
2007-12-01 03:42:52 +00:00
//-----</single tests>---------------------------------------------
2007-11-27 01:34:35 +00:00
public:
/**
* Tests whether distance between zones complies with the DRC rules.
*
* @param aZone: zone to compare with other zones, or if NULL then
* all zones are compared to all others.
* @param aCreateMarkers: if true create DRC markers.
* False: do not create markers. only fing drc errors
* @return Errors count
*/
int TestZoneToZoneOutline( ZONE_CONTAINER* aZone, bool aCreateMarkers );
/**
* Test the board footprints against a netlist. Will report DRCE_MISSING_FOOTPRINT,
* DRCE_DUPLICATE_FOOTPRINT and DRCE_EXTRA_FOOTPRINT errors in aDRCList.
*/
static void TestFootprints( NETLIST& aNetlist, BOARD* aPCB, EDA_UNITS_T aUnits,
DRC_LIST& aDRCList );
2007-12-01 03:42:52 +00:00
/**
* Open a dialog and prompts the user, then if a test run button is
2007-12-03 05:14:51 +00:00
* clicked, runs the test(s) and creates the MARKERS. The dialog is only
* created if it is not already in existence.
*
* @param aParent is the parent window for wxWidgets. Usually the PCB editor frame
2018-04-08 10:28:59 +00:00
* but can be another dialog
* if aParent == NULL (default), the parent will be the PCB editor frame
* and the dialog will be not modal (just float on parent
* if aParent is specified, the dialog will be modal.
2018-04-08 10:28:59 +00:00
* The modal mode is mandatory if the dialog is created from another dialog, not
* from the PCB editor frame
2007-12-01 03:42:52 +00:00
*/
void ShowDRCDialog( wxWindow* aParent );
int ShowDRCDialog( const TOOL_EVENT& aEvent );
2007-12-03 05:14:51 +00:00
/**
* Deletes this ui dialog box and zeros out its pointer to remember
2007-12-04 18:23:38 +00:00
* the state of the dialog's existence.
*
2007-12-04 18:23:38 +00:00
* @param aReason Indication of which button was clicked to cause the destruction.
* if aReason == wxID_OK, design parameters values which can be entered from the dialog
* will bbe saved in design parameters list
2007-12-03 05:14:51 +00:00
*/
void DestroyDRCDialog( int aReason );
2007-12-01 05:37:44 +00:00
/**
* Run all the tests specified with a previous call to
2007-12-01 05:37:44 +00:00
* SetSettings()
* @param aMessages = a wxTextControl where to display some activity messages. Can be NULL
2007-12-01 05:37:44 +00:00
*/
void RunTests( wxTextCtrl* aMessages = NULL );
2007-11-27 01:34:35 +00:00
};
2018-01-28 21:02:31 +00:00
#endif // DRC_H