When starting async processes, we need to have a way to stop the process
before releasing memory. Descoping FOOTPRINT_ASYNC_LOADER while the
threads were still running could cause crashes depending on the memory
structure. To avoid this we define clear procedures for exiting a
running async processes and call these when exiting.
Fixes: lp:1772909
* https://bugs.launchpad.net/kicad/+bug/1772909
It can be useful to have similar class messages grouped together so that
error messages in a larger report don't get lost among the
warning/info/action messages.
This patch allows sorting of messages for dialogs that benefit from
organization. Default behavior of reporter messages remains
unchanged by this patch.
Fixes: lp:1772090
* https://bugs.launchpad.net/kicad/+bug/1772090
Remove KICAD_PTEMPLATE environment variable as it's purpose was not
clear and was often poorly defined as the path to the KiCad installed
templates.
Add a new KICAD_TEMPLATE_DIR environment variable which clearly should
be the path of the KiCad installed templates. Make this environment
variable available in the user settings in case the default is wrong
which has been the case in some instances. Use the standard search
stack to set the default system template path which has a much greater
chance of being correct.
Add a new KICAD_USER_TEMPLATE_DIR environment variable which clearly
should be the path of the user defined templates. Users most likely
were not even aware of the old default user path unless they read the
fine manual.
Set template path search stack priority as follows:
* KICAD_USER_TEMPLATE_DIR
* KICAD_TEMPLATE_DIR
* Search stack template paths
Reverse template selection dialog and project path dialog for improved
user experience.
Fixes lp:1543443
https://bugs.launchpad.net/kicad/+bug/1543443
1) hide the status popup when the dialog is brought up
2) forward events from the popup to the canvas so hotkeys work
3) make sure diff pair radius is always 100%
4) fix greyed-out Miter style label
5) make L a hotkey so it works before you start dragging
Fixes: lp:1545856
* https://bugs.launchpad.net/kicad/+bug/1545856
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
This reverts the hotkeys file format to a human readable and VCS
compatible listing by splitting individual hotkey assignments onto
separate lines instead of the single key. This unifies the hotkey format
between the application configuration and export Hotkey routines.
Both hotkey formats remain readable by the same routines.
The tools were being set as idle, whenever an event handler execution
finished (via TOOL_MANAGER::finishTool()). Such approach does not take
into account cases when a tool is active and receives an event causing
another event handler of the same tool to run. When this happend, the
tool has been incorrectly set as idle when the second handler finished
its execution.
In a particular case, invoking the router settings dialog caused the PNS
router to be incorrectly detected as inactive in
EDIT_TOOL::invokeInlineRouter(). Due to that, ROUTER_TOOL::CanInlineDrag()
requested a selection that required disambiguation menu for items
that were modified by the router, but not yet committed. After the drag
tool had finished, the disambiguation menu was eventually shown
with items existing only in the undo buffer. Removing such item lead to
track DLIST corruption, effectively erasing all tracks.
Fixes: lp:1767826
* https://bugs.launchpad.net/kicad/+bug/1767826
The opencascade patch intrusively checked against libraries but broke
some build scripts. This restores the default cmake OCE behavior that was
changed by 2bab30d9a and makes the OpenCascade search truly secondary.
Minor improvement in polygon calculation to use consecutive points
rather than casting to a full segment. Avoids division except when it
will not create a denormal.
Footprint filter provides two Regex filtering options. One for keywords
and one for footprint keywords. The footprint keywords (contained in
the symbol files) need explicit '*' at the beginning and end of the
filters to allow matching start/end. Type-in filters should search
implicitly matching any wildcard substring.
Fixes: lp:1769931
* https://bugs.launchpad.net/kicad/+bug/1769931
Recent versions of wxWidgets wxStandardPaths::GetUserConfigDir() correctly
append ".config" on Linux build which was incorrect as the current code
already appended it to the path. Add a check to see if ".config" is the
last path and append as required.
Check for XDG_CONFIG_HOME environment variable on all platforms not just
Linux.
Fixes lp:1769145
https://bugs.launchpad.net/kicad/+bug/1769145
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
The only required scroll event handler is wxEVT_SCROLLWIN_THUMBTRACK,
which is responsible for dragging the scrolling sliders. One of the
remaining ones is also called when mousewheel is scrolled (MSW only) and
due to that overrides the new view setting with view settings computed
from the sliders position.
Fixes: lp:1767604
* https://bugs.launchpad.net/kicad/+bug/1767604
Footprint filters need to be able to match the start and end of strings.
The standard wildcard filter implictly adds "*" to the start and end of
match strings, so we create a derived class that requires an explicit
"*" or "?" to match wildcards.
Fixes: lp:1751565
* https://bugs.launchpad.net/kicad/+bug/1751565
KiCad read incorrect value for window position and it's size at very
first launch, which results in invisble/inaccessible window on Mac OSX.
Set correct default values for these settings fixes this issue.
And fix a typo in comment.
Corrects an error in polyline estimation
Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.
Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.
Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
It is a C-style assert causing application termination when triggered.
Certain systems display pcbnew window shrinked so much, that the canvas
size is 0x0 pixels. The only problem with that is the window needs to be
resized.
Fixes: lp:1767031
* https://bugs.launchpad.net/kicad/+bug/1767031
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
wxASSERT(), contrary to assert() does not terminate the program when
triggered. As assertions in ACTION_MANAGER are not critical and should be
treated as warnings - there is no need to close the program.
Also update the rest of the symbol-chooser usage to current
specs, including examining the timestamp to see if the list
needs loading at all.
Partial fix to: lp:1760936
* https://bugs.launchpad.net/kicad/+bug/1760936
The change track posture hotkey '/' was getting interpreted as the show
hotkey list shortcut '?' on windows. This fix is temporary hack to fix
the problem which much more involved than the simple #ifdef/#endif used
to fix this issue.
Add key code tracing to help analyze key codes for future development.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Fixes issue where TestSegmentHit falsely skips segments that are
slightly off 45°. Improves speed of function by exiting on non-hits
more quickly. Simplifies function and removes magic numbers.
This is so that tools checking for a selected item won't think
the menu has been cancelled if the selection was in a submenu.
Fixes: lp:1758372
* https://bugs.launchpad.net/kicad/+bug/1758372
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
Seth Hillbrand
jean-pierre charras
Jeff Young
Wayne Stambaugh
Maciej Suminski
Steven A. Falco
Shivpratap Chauhan
Andrzej Wolski
Simon Richter
Carsten Schoenert
Kristoffer Ödmark
Jon Evans