14339aa786
Fix shadowing variable
...
Move check into switch block
2023-01-03 17:15:44 -08:00
375fdb7a49
Exact clearance is allowed; less than clearance is an error.
...
Also fixes a bug where the units weren't shown for extra precision
numbers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13262
2023-01-04 00:03:11 +00:00
0094a0fc15
Treat teardrops as tracks not zones for disallow constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13264
2022-12-26 11:33:09 +00:00
eef47c2a79
DRC: ensure tracks are tested against holes, even if hole clearance is set to 0.
...
Even with clearance = 0, copper to hole must be tested because it cannot be
inside the hole
2022-12-23 14:06:10 +01:00
e28f6ecc00
Fetch a better location for keepout area collsions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13220
2022-12-21 18:22:15 +00:00
2fd500e20b
Respect the "report all errors" checkbox
...
When we have objects spanning multiple layers, the user doesn't need to
see every layer/hole combination violation if they do not request it
(cherry picked from commit c07043e762
2022-12-12 11:14:38 -08:00
492e6548ff
If item is on mask layer then we won't call it again on copper layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13075
2022-12-10 13:51:00 +00:00
295ef6588d
Fix uninitialized variable.
2022-12-05 14:42:05 +00:00
92266635cc
Add an advanced config value for the minimum sliver
...
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
2022-12-03 16:03:43 -08:00
b5bd633625
Strict-order points in connection_width
...
The connection width checker uses morton codes to order elements. The
sort should be primarily morton-based but needs to be stable in order to
ensure that nextZ/prevZ elements are properly placed as the actual
next/prev elements in the list. Otherwise, hitting a fracture point
might make us skip in the wrong direction
Fixes https://gitlab.com/kicad/code/kicad/issues/12831
2022-12-03 16:03:43 -08:00
3501ad1b4d
Record layer for starved thermal exclusions.
2022-12-01 18:04:34 +00:00
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
8260f0ee13
Add support for unitless values to PCB_EXPR_EVALUATOR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13016
2022-11-29 14:24:20 +00:00
d232ade752
Remove cloned items from groups
...
When destroying, the group must be null and there's no group purpose in
the DRC checks
2022-11-28 09:11:20 -08:00
1e3186b9cb
Allow pad-to-copper-graphic collisions in net-ties.
...
This is done under the same conditions as track-to-copper-graphic --
the pad or track must also collide with a net-tie pad, and the pad or
track to copper-graphic collision must be within the boundary of said
pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/13008
2022-11-26 15:04:33 +00:00
4aff5c7618
Keep courtyard caches alive during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-25 17:20:11 +00:00
5de4bfde93
Move drilled NPTH holes to hole-clearance checking. Edge-clearance
...
checking is just for milled holes (slots).
Fixes https://gitlab.com/kicad/code/kicad/issues/12980
2022-11-23 13:31:51 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
5e7c4b734c
Small optimizations in DRC and SHAPE_POLY_SET.
2022-11-17 02:10:22 +05:00
619c340d92
Handle holes when building outlines for copper sliver checker.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
9380b9a451
Trim pad layers to current board before comparing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12758
2022-10-25 23:53:10 +01:00
cef7cd8f7c
Move default font to RENDER_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12723
2022-10-22 21:32:42 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
098e96f1c7
Use more precise formatting in DRC messages when less precise values are identical.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
9119b5072a
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
d6c7f46842
Formatting.
2022-10-06 22:18:53 +01:00
6927e75eae
Handle keepout areas with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12581
2022-10-06 15:08:56 +01:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
78acb4f07f
Fix unintentional typo
2022-09-14 15:14:35 -07:00
26a1114e3c
Avoid Yields when the results are ready
...
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes
Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
0df1786456
Improve adherecne to ignored tests.
2022-09-11 19:48:08 +01:00
3534cfbba8
Allow a single net collision with a free pad.
2022-09-06 13:59:52 +01:00
c0ba1b35bf
Remove SMD pad side sanity check.
2022-09-05 10:41:37 +01:00
d5cf7828fa
ADDED footprint checks for SMD pad consistency.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11736
2022-09-04 10:34:32 +01:00
854acd4c77
Null-ptr safety for diff-pair-coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12329
2022-09-02 00:49:33 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
Seth Hillbrand
Jeff Young
jean-pierre charras
Alex
Wayne Stambaugh
Marek Roszko