Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
wxString constructor will determine string length using strlen() when it
is not explicitly specified, but there is no termination byte added when
reading file contents to 'buffer' variable.
Use the wxWidgets official accelerator key string for WXK_BACK (this is "Back") in menuitems instead of "BkSp"
Also when reading the hotkey config file, avoid to set a hotkey to unassigned when its name is not found in list.
The default value is used.
Unassigned hotkey use <unassigned> as key name (and 0 as key code) in file.
On Linux (GTK?) the accelerator key BkSp, when used in menus must be coded as "\t\b" and not "\tBkSp".
However, On Windows, it must be "\tBkSp".
Joys of multi-platform development.
Hotkey options have shifted some options from context-specific to global
hotkeys. This causes conflicts with old hotkey definitions. Instead,
we keep the v5 eeschema/pcbnew hotkeys completely separate. Users can
still import their custom hotkey files from v4.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
Unifies the different sections of hotkeys so that we are not storing two
[eeschema] or [pcbnew] sections in two different files.
Previous hotkey definitions are loaded at start if they exist but are
overwritten by the new format, if it exists. Changes to hotkeys save
only in the combined format.
Hotkey editor for each application only shows the hotkeys relevant to
that application.
Fixes: lp:1741757
* https://bugs.launchpad.net/kicad/+bug/1741757
Fixes: lp:1668799
* https://bugs.launchpad.net/kicad/+bug/1668799
This reverts the hotkeys file format to a human readable and VCS
compatible listing by splitting individual hotkey assignments onto
separate lines instead of the single key. This unifies the hotkey format
between the application configuration and export Hotkey routines.
Both hotkey formats remain readable by the same routines.
Fixes: lp:1738875
This patch saves hotkeys to default file when a hotkeys file is
imported, so they remain persistent in future sessions.
Also, a few minor tidy ups (e.g. c++11 nullptr) internal to
common/hotkeys_basic.cpp.
* Rename Eda_FileSelector to EDA_FILE_SELECTOR.
* Add optional pointer to wxString to save the most recently used path to EDA_FILE_SELECTOR.
* Rename Eda_DirectorySelector to EDA_PATH_SELECTOR.
* Replace wxGetCwd() with wxStandardPaths::GetDocumentsDir(). This fixes the windows issue
where wxGetCwd() returns the path where the executable files are located.
* Add code to handle most recently used path to EDA_BASE_FRAME.
* Fix string formatting error in kicad/files-io.cpp.
* Remove setting and restoring current working directory when launching GerbView. Setting the CWD
has no effect on the launched executable which starts with it's own CWD.
* Allow project path to be passed to GerbView when launched from KiCad.
* Note: this is a work in progress. Do not expect every path and/or file selection dialog to properly
update the most recently used path. The correct solution to this problem requires a much more
well though out solution which will not happen until after the next stable release.
* If a hotkey is set to "unassigned" (typically by causing a conflict), it
is not loaded correctly. The loader interprets "unassigned" as "keep the
default assignment", which leads to a conflict later that causes an
assertion failure.
Previously, only the lib named "power" was used (and therefore power parts defined in other libs not shown).
Now, all power parts can be loaded from any library.
Also, when loading power parts from the chose component dialog or the lib viewer, libs and parts are filtered: only power parts and libs containing power parts are listed.
Hotkeys: move a few global strings in the files where ther are actually used (and make them local.) and code cleaning.
Fix a few other minor issues.
* Change hot key editing contol from wxGridTableBase to wxListCtrl.
* Separate hot key lists into separate tabs rather than one large list.
* Coding policy fixes.
Rename "Switch highcontrast" to "Toggle High Contrast".
Eliminate most of the abbreviated hotkey titles.
Doxygenize dialog_hotkeys_editor.h and add missing license block.
Display <unassigned> if key code is 0 (NULL).
Refactor hotkey editor to use tab control instead of one giant list.
Each tab is a separate hotkey section.
Modify EDA_HOTKEY_CONFIG to change the m_Comment member to m_Title for a new purpose.
We want a pretty title in the hotkey editor. We use m_Title for the key export comment which
still conveys the purpose just as easily.
Refactored usage of wxGrid into wxListCtrl which allows capturing navigation characters
and also works better (single selection is built in).
Add hotkey overwrite prompts that are paired with "Common" section. It will check if a hotkey
overlaps with the proper sections. i.e. Common with the all other sections; or Section 1 with just Common.
Right-click menu removed due to wxListCtrl being able to catch the special keys properly.
* Create GetNewConfig() and GetKicadConfigPath() to unify configuration file
creation and location.
* Move Windows configuration out of the registry into configuration files.
* Move Linux configuration files from $HOME to $HOME/.config/kicad to eliminate
configuration file pollution in the users $HOME folder.
* Fix a bug in the configuration file where the Eeschema hot keys are saved.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.