* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
* Use index when saving layers to handle translated layer names.
* Add LOCALE_IO switcher when loading s-expression format.
* Make SEGVIA default to through hole to improve file size.
* Don't save default orientation of 0 degrees in TEXTE_MODULE and TEXTE_PCB.
* Don't save default zone configuration parameters.
* Save multiple zone corners on a single line.
* Fixed missing ( check in graphic and module arc parsers.
* Consistency improvements for DRAWSEGMENT and EDGE_MODULE objects.
* Minor tweaks to D_PAD formatting.
* Move board item object Format() functions into PCB_IO object.
* Change file format to use layer names instead of numbers.
* Change file extension to kicad_pcb.
// This provides better project control over rounding to int from double
// than wxRound() did. This scheme provides better logging in Debug builds
// and it provides for compile time calculation of constants.
#include <stdio.h>
#include <assert.h>
#include <limits.h>
//-----<KiROUND KIT>------------------------------------------------------------
/**
* KiROUND
* rounds a floating point number to an int using
* "round halfway cases away from zero".
* In Debug build an assert fires if will not fit into an int.
*/
#if defined( DEBUG )
// DEBUG: a macro to capture line and file, then calls this inline
static inline int KiRound( double v, int line, const char* filename )
{
v = v < 0 ? v - 0.5 : v + 0.5;
if( v > INT_MAX + 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' > 0 ' for int\n", __FUNCTION__, filename, line, v );
}
else if( v < INT_MIN - 0.5 )
{
printf( "%s: in file %s on line %d, val: %.16g too ' < 0 ' for int\n", __FUNCTION__, filename, line, v );
}
return int( v );
}
#define KiROUND( v ) KiRound( v, __LINE__, __FILE__ )
#else
// RELEASE: a macro so compile can pre-compute constants.
#define KiROUND( v ) int( (v) < 0 ? (v) - 0.5 : (v) + 0.5 )
#endif
//-----</KiROUND KIT>-----------------------------------------------------------
// Only a macro is compile time calculated, an inline function causes a static constructor
// in a situation like this.
// Therefore the Release build is best done with a MACRO not an inline function.
int Computed = KiROUND( 14.3 * 8 );
int main( int argc, char** argv )
{
for( double d = double(INT_MAX)-1; d < double(INT_MAX)+8; d += 2.0 )
{
int i = KiROUND( d );
printf( "t: %d %.16g\n", i, d );
}
return 0;
}
* Move EDA_TEXT object into separate header and source file.
* Compile EDA_TEXT class separately for BOARD_ITEM and SCH_ITEM units.
* Compile PAGE_INFO class separately for BOARD_ITEM and SCH_ITEM units.
* Minor formatting tweaks to Pcbnew s-expression file.
* Move internal unit formatting functions into BOARD_ITEM and SCH_ITEM.
* Save dialog now supports saving boards to new file format.
* Add CMake option to build s-expression file save.
* Add check to main CMakeList.txt file to make sure nanometers are
enables when the new file format is built.
* Minor tweaks to object format functions for improved output.
* Rename kicad_plugin.h/cpp to legacy_plugin.h/cpp.
* Add s-expression Format() function to all objects derived from
BOARD_ITEM.
* Add s-expression Format() function to base objects as required.
* Add functions to convert coordinates from base internal units
(nanometers) to millimeter string for writing to s-expression
file.
* Add temporary dummy conversion functions to prevent link errors
until schematic and board object and action code can be separated
into DSO/DLL.
* Add CMake build option to build Pcbnew with nanometer internal
units.
* All objects derived from EDA_ITEM now have consistent hit test method
definitions.
* Remove double function calls from all classes derived from SCH_ITEM.
* Lots of Doxygen comment fixes.
* Remove unnecessary copy constructors from board and module library
objects.
* Add doClone() method to board and library objects.
* Add comment to class definitions where the default copy constructor
generated by the compiler was adequate.
* Replace copy method with clone method where applicable.
* Remove DuplicateStruct() function.
* Remove track object copy function.
* EDA_DRAW_PANEL completely encapsulated.
* Moved OSX m_overlay member from EDA_DRAW_PANEL to EDA_DRAW_FRAME where
it is used.
* Doxygen comment warning fixes.
which should eventually go away in favor of kicad_plugin.cpp.
Add CMake options USE_NEW_PCBNEW_LOAD and USE_NEW_PCBNEW_SAVE, which should not be
used yet, and both default to OFF accordingly.
* Grammar and spelling fixes in Eeschema, CvPcb, and Pcbnew path and
library dialog tool tips.
* Translate the French file name subrill.cpp to highlight.cpp.
* Lots of coding style policy fixes.
* Factor auto save common code into base frame class so all frame windows
can take advantage of the shiny new auto save goodness.
* Use a timer instead of depending on mouse and keyboard events to trigger
an auto save.
* Check for auto save file when opening a board and ask user if they
wish to use the auto save file or the last saved board file.
* Protect all base frame public members.
* Correct all user strings and comments for the correct capitalization of
application names according to JP. They are KiCad, Pcbnew, CvPcb,
Eeschema, and GerbView.
* Add a note the the user interface policy about the correct capitalization.
* Add visible clearance when edit node or track segment,
add parameter "show clearance for new or edited track with via area"
in "Display options" menu.
* All header files used to create the PCB common library now compile as
stand alone code. This prevents the need to define them in a specific
order to make source code compile properly. It should also now be
possible to relocate the source code to build the common PCB library
to a separate folder.
* Move various locate functions into the appropriate board item object.
* Unified best zoom for all frames derived from PCB_BASE_FRAME.
* Remove track.cpp as it is no longer needed.
* Dead code removal.
* Remove scary frame window pointer member from board item objects.
* Add draw bounding box to gerber draw item for debugging purposes.
* Changed <wx-2.8/xml/xml.h> to "xnode.h" in pcbnew_config.cpp to fix bug
when building against wxWidgets 2.9 and above.
* Convert broken wxXmlNode code to use XNODE.
* Overloaded XNODE constructor for creating child nodes.
* Translate French naming conventions.
* Translate French comments.
* Remove tabs from several source files.
* Coding style policy and Doxygen comment fixes.
Heikki Pulkkinen
Wayne Stambaugh
jean-pierre charras
Lorenzo Marcantonio
Andrey Fedorushkov
Dick Hollenbeck
marco.
Roman Bashkov