d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
58b03b0a1c
Small optimizations.
2022-09-22 17:22:04 +00:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
16b4f96405
Centralize no-connect- and free-pad processing.
...
Also makes the track-net-names less squirrelly around the viewport
edges.
2022-09-06 13:59:52 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
f17a865593
Move EDA_ITEM hitTest to BOX2I.
2022-08-31 17:18:45 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
e0f6a6e475
Run hole-to-hole checks on Edge_Cuts layer.
...
Also makes the flashing logic inside PAD::GetEffectiveShape() easier
to understand.
Fixes https://gitlab.com/kicad/code/kicad/issues/12296
2022-08-29 17:37:49 +01:00
af71d42307
Renamed PROPERTY_TYPE enum names to avoid a conflict on MSYS2
2022-08-22 21:32:32 -04:00
95fd58b25a
Properties meta-data for pcbnew classes
2022-08-22 21:32:00 -04:00
4f0136db3b
Attempt to fix std::initializer_list lifetime issue.
2022-08-21 20:54:41 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
aaf99eb0cc
Performance optimizations.
2022-07-11 21:25:12 +00:00
359d66bc81
Protect against invalid pads
...
Before dereferencing the front of the sequence, we have to ensure that
the pad exists on any layer. If not, just return the default (probably
F_Cu) for the element
2022-06-16 08:20:47 -07:00
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
dbee441328
We've probably smoked out enough of the GetLayer() issues.
...
... and GetProperty() can query GetLayer() in user scripts.
2022-04-14 17:09:27 +01:00
b66df1e4f3
Remove dead code
2022-04-05 16:26:08 -07:00
921181b20b
Cleanup.
2022-04-04 20:43:08 +01:00
1926af0c34
UNDEFINED_LAYER is always flashed
...
This is already true for vias and should be true for pads as well
Fixes https://gitlab.com/kicad/code/kicad/issues/11335
(cherry picked from commit 7d96d5940d
2022-04-04 12:26:50 -07:00
90af5a36d2
Show hole clearance lines around NPTH pads.
...
Also make the clearance line NONPLATED_HOLES colour, not the PADS_TH
colour.
2022-04-04 10:28:33 +01:00
f22316b868
Careful about hiding pad layers.
...
We also draw netnames and clearance lines based on some of these layers.
2022-04-04 10:28:33 +01:00
442aae19d9
Separate flashing check for connectivity
...
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
f866d15154
Pcbnew: fix crash when clicking on a footprint on a filled zone area.
2022-03-07 13:56:47 +01:00
0dc857b5ab
Clean up pad handling in 3D viewer.
...
Most importantly, create F_Cu/B_Cu layers if they're otherwise empty
but we have plated pads to render on them.
Fixes https://gitlab.com/kicad/code/kicad/issues/10207
2022-03-06 13:57:12 +00:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
08df5c0b01
Handle hidden layers in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10946
2022-02-23 15:31:07 +00:00
fad4c135fa
Use only a physical connection to determine flashing of pads.
...
Checking for proper nets just confuses things when the nets are set
wrongly for some reason. This way we generate clearer DRC errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/10645
2022-02-20 20:54:56 +00:00
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
5efa354f0f
Add asserts to flush out incorrect uses of GetLayer().
2022-02-18 12:14:38 +00:00
93c7046a77
Return nominal pad shape when a specific layer isn't specified.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10755
2022-02-11 22:09:22 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
b9eb3e9b05
Be more explicit about string conversions.
2022-02-03 23:07:41 +00:00
4eac8d7c66
Remove unit-less angles from geometry lib APIs.
2022-01-20 21:10:04 +00:00
e61144d45a
Finish with EDA_ANGLE.
2022-01-16 21:15:40 +00:00
9b661aea10
EDA_ANGLE for plotters.
...
Also fixes a compile error in the PNS Playground.
2022-01-16 01:19:45 +00:00
3f98769a77
More EDA_ANGLE.
...
Includes bug fix for catastrophic error in Add() for converting to
radians.
Includes bug fixes for the fact that the pcbnew test can't seem to
find the ANGLE_* objects (getting all 0's instead).
2022-01-15 01:30:04 +00:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
c9487bad18
Move BOARD_ITEM::Rotate() to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
Jeff Young
Alex
Marek Roszko
Maciej Suminski
Seth Hillbrand
jean-pierre charras