2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
Removed SetCurrentClassName() (it was not used anywhere and less safe than SetCurrentClass()).
Added BOARD_DESIGN_SETTIGNS::GetDefault() to make some pieces of shorter and clearer.
Most of the changes are just adding GetDesignSettings() before every occurence of m_NetClasses.
More complex changes:
class_netclass.cpp - NETCLASS does not store the pointer to the parent BOARD anymore. Added function SetParams( BOARD_DESIGN_SETTINGS& ).
class_netclass.h - Removed GetTrackMinWidth(), GetViaMinDiameter(), GetViaMinDrill(), GetuViaMinDiameter(), GetuViaMinDrill() as they were refering to BOARD_DESIGN_SETTINGS anyway (they are not net class specific).
kicad_plugin.cpp - filters out empty nets (that are anyway not saved) when storing net class information. Previously it was done in NETCLASS::Format() function.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- SEGVIA becomes VIA
- Drill size moved from TRACK to VIA
- Removed shape from TRACK, becomes ViaType in VIA
- GetTrace becomes GetTrack, for uniformity
- Some minor constification and typo fixes
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Renamed BOARD_CONNECTED_ITEM::SetNet() -> SetNetCode()
Added BOARD_CONNECTED_ITEM::GetNet() for accessing NETINFO_ITEM* of a given item.
Fixed module editor crash when launched to edit a module from a PCB.
Replaced some BOARD::FindNet( item->GetNet() ) calls with BOARD_CONNECTED_ITEM::GetNet().
Renamed BOARD_CONNECTED_ITEM::SetNet() -> SetNetCode()
Added BOARD_CONNECTED_ITEM::GetNet() for accessing NETINFO_ITEM* of a given item.
Fixed module editor crash when launched to edit a module from a PCB.
Replaced some BOARD::FindNet( item->GetNet() ) calls with BOARD_CONNECTED_ITEM::GetNet().
Added DIMENSION::SetOrigin(), DIMENSION::SetEnd(), DIMENSION::GetOrigin(), DIMENSION::GetEnd(), DIMENSION::GetHeight().
Fixed flipping for DIMENSION class.
Added an information that helps to understand roles of the points in the DIMENSION class.
Some minor changes to PCB_PAINTER (mainly using const COLOR4D& for taking the result of GetColor() function).
Now, nets are saved with consecutive net codes (both modern & legacy plugins).
Zones are saved together with their nets, without depending on the fact if there are any pads with such net. Therefore validation of zone net names was removed (pcbnew/class_board.cpp).
Performed tests:
- Changed a pad's net name from empty to existent - ok, name was changed.
- Changed a pad's net name from empty to nonexistent - ok, error message is displayed, net name stays empty.
- Changed a pad's net name from existent to empty - ok, net name became empty
- Changed a pad's net name from existent to nonexistent - ok, error message is displayed, net name is not changed.
- Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled.
- Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes).
- KiCad s-expr & legacy, Eagle, P-CAD boards seem to load without any problem (they also contain correct net names assigned to the appropriate pads). All types of board file formats were loaded, then saved in sexpr format and reopened with a KiCad built from the master branch (without my modifications).
- A few boards were also saved using the legacy format and were opened with the master KiCad without any issues.
- Change a net name for a pad, restore with undo/redo - ok
- Remove everything, restore with undo - ok
- Remove everything, reload netlist - ok
Differences observed between files saved by the master branch KiCad and this one:
- list of nets are not saved in any particular order, so net codes may differ
- the default net class does not contain the unconnected net
- ZONE_CONTAINER::m_Netname field
- ZONE_CONTAINER::SetNetName()
- ZONE_CONTAINER::SetNet() [it uses the one in BOARD_CONNECTED_ITEM]
- ZONE_CONTAINER::GetNetName() [instead BOARD_CONNECTED_ITEM::GetNetname is used]
- ZONE_CONTAINER::SetNetNameFromNetCode()
Performed tests:
- Drawn a zone that belongs to a net, then modified schematics so the net does not exist anymore. After reloading the net list, all pads/tracks are updated. Zones still belongs to the net that does not exist in the schematic (but still exists in .kicad_pcb file). After running DRC, the zone becomes not filled.
- Undo & redo affects assignment of a polygon to a specific net (you may change net of a polygon, refill it and undo/redo the changes).
* Make GPCB_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
* Make KICAD_PLUGIN::EnumerateFootprints() read the directory contents
instead of loading the entire cache.
comment for GITHUB_PLUGIN which should flow into Doxygen output.
*) Rewrote:
PCB_BASE_FRAME::Save_Module_In_Library(): now uses fp-lib-table and PROPERTIES.
PCB_EDIT_FRAME::ArchiveModulesOnBoard(): now can archive to any writable library type.
PCB_BASE_FRAME::SelectLibrary(): is now generic for selecting a library, not just the active library.
* When loading footprint do not retest every footprint in cache. Only test
the footprint being loaded. Fixes long load times on libraries with a lot
of parts.
* Fix footprint name bug where file extension was added to the end of the
footprint name.
* Fix bug in path equivalence test due to Posix path separators in footprint
library table. Convert paths to native separator before comparison.
* Fix a bug in FOOTPRINT_VIEWER_FRAME::OnActivate() which cause the footprint
list to always get reloaded when using footprint library tables.
* Remove some unnecessary debugging messages.
* Add a few Doxygen comments to FP_CACHE in kicad_plugin.cpp.
* Use FPID instead of wxString in MODULE object.
* Use FPID instead of wxString when loading and saving files.
* Use FPID in COMPONENT object.
* Add wxString helper functions and comparison operators to FPID.
* Add fp_lib token to pcb and netlist file formats.
* Add code to load and save FPIDs to pcb file format.
* Fix segfault when deleting invalid footprint library tables in Pcbnew
in non footprint library table build.
* Fix bug when counting the number of mod files in
EDA_APP::SetFootprintLibTablePath();
Save grid origin in .kicad_pcb files only if not 0,0 (to keep compatibility with previous versions of pcbnew, mainly the stable version)
Very minor other fixes (set modify flag when grid origin is moved from the dialog grid)
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
This is limited to round tripping the lines of commented text in the
loading and saving to disk through PCBIO::Format() and PCBIO::Parse().
No editing of the comments is given.
fix potential issue in .kicad_pcb file creation, in some places where a %g or %.16g format was used:
al least under Mingw/gcc4.7.2, the floating number was written using scientific notation, not accepted by the S-expr reader.
Dick Hollenbeck
Tomasz Wlostowski
jean-pierre charras
unknown
Lorenzo Marcantonio
Wayne Stambaugh
Povilas Kanapickas
Ben Harris