When double-clicking to open a symbol, it is no longer selected in the
tree. We need to use the `GetTargetLibId()` to pick the correct symbol
(first selected, then current) when using the duplicate command
Fixes https://gitlab.com/kicad/code/kicad/issues/11034
(cherry picked from commit 802d20c409)
The fix for https://gitlab.com/kicad/code/kicad/issues/10529 kicked the
subsequent IDs for unit selection off the maximum ID value for popup
menus. This increases the maximum popup number (integers are free)
(cherry picked from commit 79b6991d7b)
Center rotation will often misalign lines to the grid, which is bad
until fix off grid items on the schematic.
We can rotate a connection end into a new connection or to become
collinear with an existing line, so we need to check for this at the end
of rotation.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10565
(cherry picked from commit 7d4cb91f39)
If a wire intersects more than 2 pins from the same symbol, we don't
trim connections. If the wire intersects exactly two pins from a single
symbol, we remove the wire between the pins.
We avoided doing this before because we didn't have a good metric for
trimming vs. not. But the per-symbol calculation feels like the least
surprising option.
Fixes https://gitlab.com/kicad/code/kicad/issues/10909
Fixes https://gitlab.com/kicad/code/kicad/issues/1857
(cherry picked from commit 75a4036e45)
Selecting end and midpoint will select whole line. Some changes for
orthogonal dragging made this worse than in 6.0.
Improves, but does not fully resolve:
https://gitlab.com/kicad/code/kicad/-/issues/10860
The use of XOR with integers here is needed as MSVC doesn't implement
the use of std::signbit for integers and casting up to double just to
get the signbit feels wrong
We need the item to be currently selected when repeating the last symbol
insert. This ensures we have a valid selection before starting the move
tool and possibly getting odd system behavior from mouse positions
Fixes https://gitlab.com/kicad/code/kicad/issues/10619
(cherry picked from commit 7642a9db79)
Also fixes some plot bugs with arcs.
Also moves polygonization of arcs (when required) in plotting code
from 5 degrees to calculated based on ARC_HIGH_DEF.
Fixes https://gitlab.com/kicad/code/kicad/issues/5017
SHAPE_LINE_CHAIN will, by default, remove duplicate points when
appending. We don't want to do this when constructing our polygons in
symbol editor, so we need to explicitly call the routine without
deduplication
Fixes https://gitlab.com/kicad/code/kicad/issues/10289
(cherry picked from commit 62f8603353)
When leaving the main point editor loop, we need to ensure that the edit
point is cleared as well. This is usually cleared by a ClearEvent call
but in case this is missed, we need to ensure that other tools are not
caught out
Fixes https://gitlab.com/kicad/code/kicad/issues/10288
(cherry picked from commit 9a2332dfcf)
Undo/Redo can change the symbol referenced by the symbol drawing tool.
This updates the current symbol before important steps to keep the
system synced
Fixes https://gitlab.com/kicad/code/kicad/issues/10125
(cherry picked from commit b8a7a66a0a)
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
Always use full sheet paths when storing sheet instances. Partial sheet
paths cannot be full resolved resulting in lost page numbers when renaming
sheet file name.
Fixes#9782
And undo the previous changes in SCH_TEXT::Rotate().
We continue hitting this with a wrench until it gets fixed or becomes
broken beyond any recognition.
This makes undo/redo look really strange as the other elements get
aligned but the wires do not (or rather their unconnected ends do not)
Fixes https://gitlab.com/kicad/code/kicad/issues/9275
Remove duplicate instance data saved in both root SCH_SCREEN and SCH_SHEET
objects that was causing them to be out of sync. All sheet instance data
is stored in the SCH_SHEET object itself and rebuilt on the fly so it is
always current.
Remove Get/SetPageNumber from SCH_SHEET_PATH object so it doesn't obfuscate
where the actual sheet page number information exists.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9782
Grid-based accuracy doesn't need to be any larger than 1/2 the
diagonal as we'll snap to one side or the other. And symbols don't
need as much slop as other items since there's plenty of "meat" on
them.
Fixes https://gitlab.com/kicad/code/kicad/issues/9805
1) Make sure the y-coord is correctly inverted before calling collision
routines.
2) Give LIB_SHAPE poly lines the same extra slop as SCH_LINEs.
Fixes https://gitlab.com/kicad/code/kicad/issues/9791
Text has a fairly big bounding box to account for descenders, overbars,
etc., but it makes it feel too sloppy for hittesting. This change
allows selection disambiguation to look at the actual strokes of the
text when deciding what's "closest".
Fixes https://gitlab.com/kicad/code/kicad/issues/9506
Leaving the forced position on results in the auto-line linking to a pin
for far longer than we intend if there are other hits in the area of the
cursor
Fixes https://gitlab.com/kicad/code/kicad/issues/9321
Calling UpdateItem() may be performed by in a common loop, e.g. for(
SCH_ITEM* item : GetScreen()->Items() ) or similar. We cannot call
GetScreen()->Update( SCH_ITEM* ) in this routine as it will remove and
re-add the item to the RTree, invalidating iterators. If needed, the
items need to be cached to an external container before updating
Fixes https://gitlab.com/kicad/code/kicad/issues/9318
If we do a real drag, the timer will be cancelled. If we don't, then
the user is still holding the mouse button down and would probably like
to see the menu. Otherwise it appears the action is dropped.
Keeps the lines connected but doesn't solve the crossed-wire mixups.
This allows common usage (mirroring labels/rotating segments) and leaves
prevention of the crossed wires to the user.
We can't really prevent crossed wires when rotating e.g. a part with
wires connected to 4 sides and users will not expect that. But we
should not disable useful features like mirroring multiple parallel
items to avoid a known impossible situation
Also provides an alternative solution to 345f506f0c that allows us to
rotate groups without destroying connections on hover
Fixes https://gitlab.com/kicad/code/kicad/issues/8403
Fixes https://gitlab.com/kicad/code/kicad/issues/8523
doSelectionMenu returns false to indicate a cancelled menu. This needs
to be handled in selectPoint when directly accessing doSelectionMenu in
the same manner as SelectionMenu() events
Fixes https://gitlab.com/kicad/code/kicad/issues/9218
We have a fixed bottom-align for the text and labels in eeschema.
Therefore, mirroring vertically needs to account for the text's offset
from the bounding box center.
Fixes https://gitlab.com/kicad/code/kicad/issues/9208
The select-single-wire stuff is no longer needed, and the prefer-wire-ends
stuff needs to be distance-based.
Also improved wire hit-testing to include bubbles the size of the dangling
symbol at each end.
Fixes https://gitlab.com/kicad/code/kicad/issues/9187
1) Expand the accuracy to at least the grid spacing
2) Move pin-selects-symbol logic to Selectable()
3) Recode pick-closest algorithm to handle exactHits and inexactHits
separately
4) Remove pin target from bounding box in favour of expanding it to
at least as wide as the pin decoration (this prevents the accuracy
off the end of the pin from growing too large)
Also removes the message bar display of assigned netclass for
buses and bus-to-bus entries.
Also fixes a bug where assigning a netclass via the canvas only
looked at the first level of bus members (and not any nested
members).
Also fixes a bug where the bus name validator tried to validate
a vector bus first -- which doesn't work as a vector bus may be
nested in a group bus.
Also fixes a bug where we were failing to check for illegal
chars in bus definitions which otherwise passed the bus parsers.
See additional comments in the bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
While it would make more sense to have them both use the old canvas
algorithm (of only assigning to the members), I'd be *very* hesitant
to change the Setup Dialog and underlying machinery this late in the
6.0 release.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
jean-pierre charras
Jeff Young
Seth Hillbrand
Mike Williams
Marek Roszko
Wayne Stambaugh
dsa-t
Roberto Fernandez Bautista
Mikolaj Wielgus
Jon Evans