Fix highlight not cleared by Pcbnew.
Fix highlight not cleared by Cvpcb (missing code).
Add comments. Remove a few now useless printf used for debug
When clicking on a empty area, clear any highligthed symbols
Fixes: lp:1809977
https://bugs.launchpad.net/kicad/+bug/1809977
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
Spooling up a full PLAYER in the background takes too long.
This also fixes bugs around how the tables are saved, although
that was just missing code rather than anything architectural.
Fixes: lp:1785436
* https://bugs.launchpad.net/kicad/+bug/1785436
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
It's a pretty good clue that the user wants to filter the footprints
by library (as it has no other purpose).
Fixes: lp:1780487
* https://bugs.launchpad.net/kicad/+bug/1780487
(cherry picked from commit b9a56f1)
Don't be pedantic about it having to come from the footprint
list, the component list also has footprints assigned.
(cherry picked from commit 759fba1)
This allows it to participate in Kiway things such as updating
language or common settings.
Fixes: lp:1779558
* https://bugs.launchpad.net/kicad/+bug/1779558
(cherry picked from commit b3f8478)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
As of v5 footprint library reorganization (one repo per library concept
is replaced with a common repo for all libraries), the Footprint Library
Wizard may handle only the old libraries. It has been replaced with
a file browser to select only local files.
Fixes: lp:1772209
* https://bugs.launchpad.net/kicad/+bug/1772209
* Refresh the view only when changes are made in the caller frame.
* Allows recreate a new instances when try to open the 3D view from a frame taht is not the initial caller
* Remove duplicate code in kicad frames.
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
Option 'Center and warp cursor on zoom' has inverted (opposed) value
in the display options dialog of Footprint preview of CvPcb. If this
option is set the cursor does not moves to center on zooming but if
option is unset it does.
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the common, 3D viewer, CvPcb, and Eeschema code paths.
Updated the use of component to symbol.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
fp viewer uses the default colors, because it has no color setup dialog.
class_colors_design_settings: remove not used members.
Fix issue in modedit: the color config was never read.
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
Allow partial library reads in libraries that support footprint per file.
This includes the KiCad and GEDA footprint libraries.
Allow for partially cached libraries rather than ignoring all valid files
when an error occurs.
- DIALOG_CHOOSE_COMPONENT has footprint select widget
- FOOTPRINT_SELECT_WIDGET
- FOOTPRINT_CHOICE widget (customized wxComboCtrl)
- FOOTPRINT_FILTER class
- FOOTPRINT_INFO rework:
- FOOTPRINT_ASYNC_LOADER to load without freezing UI
- Rewrite loader threads as queue-driven thread pool
- Make FOOTPRINT_INFO available via kiway
- FP_LIB_TABLE::PrefetchLib
- Access to global fp-lib-table via kiway
- SYNC_QUEUE threadsafe queue template
- Remove KICAD_FOOTPRINT_SELECTOR build option
1. If a footprint filter contains a : (colon) character, then the filter is matched against the pattern <LibName>:<FootprintName>
2. If there is *no* : (colon) character present, then it is matched against <FootprintName>
3. The same behaviour applies for the manual filter string in CvPCB
eeschema now supports arbitrary colors for all object types, and
pcbnew does in GAL canvas. When switching from GAL to legacy canvas,
pcbnew will convert colors to the nearest legacy color.
bitmaps.h was included in nearly every file in the project due to it
being included by base_struct.h
Only about 130 files actually use the XPM definitions defined there, and
many of those already included bitmaps.h themselves, or via
menu_helpers.h. However, touching bitmaps.h would result in over 400
rebuilt files for pcbnew alone.
This commit moves the bitmap-related types like BITMAT_DEF out to a new
header, which is still included by base_struct.h, which is less
avoidable for now, it's it's used in the interface.
The icon list is still in bitmaps.h. This has the side effect that's
it's now easier to automatically generate this file.
Many classes in pcbnew and eeschema needed some functions moved
to the implementaitons from the headers too.
Rename FPID to LIB_ID as is now used as a generic library identifier and
is no longer specific to footprints.
Remove all mention of footprint from the new LIB_ID doxygen comments and
code.
Rename files fpid.h and fpid.cpp to lib_id.h and lib_id.cpp.
Rename fp_lib_table.keywords file to lib_table.keywords and adjust CMake
build dependencies accordingly.
Update all source files effected by the code and file name changes.
Update .gitignore for file name changes.
Derive LIB_TABLE_ROW from boost::noncopyable for use in boost pointer
containers.
Use std::unique_ptr to manage PROPERTIES pointer.
Add clone support for boost pointer containers.
Split common library table code out from FP_LIB_TABLE into base LIB_TABLE
object. The FP_LIB_TABLE object only contains the code specific to
footprint library tables.
Use boost::vector_ptr for storing library table row objects.
Fix move up and down bugs in footprint library table edit dialog.
At one point, all of the footprints provided by the KiCad footprint
libraries were merged into a single pdf file. The link to open this
file was provided on the toolbar. Since the footprint libraries have
been split out into individual repositories, this file is no longer
created so the toolbar button and the underlying code to open this
file were removed.
Improve a few CvPcb menu strings.
Fixes lp:702785
https://bugs.launchpad.net/ubuntu/+source/kicad/+bug/702785
* Split and rewrite the preview window and canvas.
* Create a new class for handling the board information.
* Adds new render targets: openGL, legacy, and ray tracing.
* Render targets take full advantage of the new 3D plugins system and 3D cache
for a fast 3D model loading.
* Faster board loading.
* New OpenGL render is faster than the old one.
* New ray tracing render target with a post processing shader.
* Use of new 3D plugins (WRL, X3D, STEP and IGES) and 3D model caching.
* Preview of 3D model while browsing the file name.
* 3D preview of the footprint while adding / align 3D shapes.
* Render of 3D models according to attributes: Normal, Normal+Insert, Virtual.
* Pivot rotation centered in one point over the PCB board.
* Shortcuts keys improved for XYZ orientation..
* Animated camera.
This feature was not reliably available: neither pl_editor nor GAL supported
it. It has been replaced over the past few commits with a new zoom-to-selection
tool available in all applications and modes.
This feature cannot work reliably for reasons explained in lp:1463505. Remove
the option on OS X builds and force cursor to the small one.
https://bugs.launchpad.net/kicad/+bug/1463505
> Bernhard Stegmaier (stegmaier) wrote on 2016-01-14:
>
> As far as I see from the code this is no bug but done on intention.
>
> The reason probably is that on OSX in the legacy canvas you don't have the
> XOR-drawing as on other platforms. To the best of my knowledge, this would
> mean that on every mouse move you would have to repaint the whole window just
> to get rid of the "old" cross.
>
> So, I would say this is a clear "won't fix".
> We could think of just removing/disabling the button in the legacy canvas.
* Add event handler to check all button clicks for default command event
IDs and handle them appropriately by either calling EndQuasiModal() or
passing the event up the event handler chain to allow the default dialog
handlers to perform their magic.
* Add event handler to handle the close window event properly.
* Add scope brackets so the wxBusyCursor will stop being displayed when
the footprint library loading is complete in CvPcb.
* Remove the artificial footprint library read error limit to prevent
potentially readable libraries from being loaded after the error limit
is reached.
* Change error message dialog to an HTML dialog so that potentially large
error messages can be displayed with scrolling and the ability to copy
and paste the error message for bug reporting purposes.
* Add busy cursor when loading the footprint libraries so the user has some
idea that something is happening while the footprint libraries are being
loaded.
* Move add_directory()s in main CMakeList.txt after all find_package()
macros are run so all flags in the main CMakeList.txt are propagated
to the sub-folder CMakeList.txt files.
* Remove commented out include of config.h
* Make the link maps only build on linux as -${TO_LINKER},-cref
-${TO_LINKER},-Map=blah just gives warnings on osx w/ clang
* Make the link maps only build with flag -DKICAD_MAKE_LINK_MAPS is
defined during CMake configuration as they are highly specific.
* Moved the code for setting link maps into the main CMakeList.txt
file to avoid duplication.
* Removed -D__ASSERTMACRO__ from osx as its no longer needed
* Removed a couple of other OSX only things that wouldn't work anyway
* Moved set (BU_CHMOD_BUNDLE_ITEMS) to the main CMakeList.txt as
otherwise it would only work for the KiCad build not the other
applications
* Made KICAD_SCRIPTING_MODULES enable KICAD_SCRIPTING as currently if
you have modules enabled without the scripting base it will on build.
This could be changed to a fatal error saying you need to also enable
scripting but it seems unnecessary.
* Removed duplication of pcbnew.py install code under modules and
scripting since you can't have modules without scripting now
* The resource setting for bitmap2component is too late in the CMakeLists.txt,
and is being ignored. Bitmap2component does not have an icon resource on
Windows. Moving the entire section resolves the issue.
* The other programs only have the mingw special case listed, not the generic
declaration for the resource file so added them.
* Make the about dialog help string consistent across all menus.
* Improve print preview window and print initialization error messages.
* The usual smattering of coding policy fixes.
* Remove global s_NetObjectslist.
* Separate out non-owning version of NETLIST_OBJECTS_LIST into NETLIST_OBJECTS.
* Fix double free pertaining to ~NETLIST_READER().
* Remove all file-io from CvPCB.
* Remove exe launcher cvpcb, retain only cvpcb.kiface, since cvpcb.kiface has no file i/o.
* Add void CVPCB_MAINFRAME::KiwayMailIn( KIWAY_EXPRESS& mail ) and teach it to use old
netlist loading code with a STRING_LINE_READER LINE_READER.
* Fix BEGIN_EVENT_TABLE( CVPCB_MAINFRAME, KIWAY_PLAYER )
* Use "Close" in the file menu of every main frame window instead of the
mismatch of the terms "Close", "Exit", and "Quit".
* Change the terminology in the Pcbnew graphic text edit dialog to match the
module text edit dialog.
* Improve the layout of the Pcbnew graphic text dialog.
* Fix some wxPrintf parameter type assertions for 64 bit time_t.
* Fix all (at least I think I got all of them) duplicate menu accelerator
characters.
* Create new dialog to edit environment variables.
* Add helper class ENV_VAR_ITEM to manage environment variable values and
if they were defined externally.
* A path configuration dialog access to KiCad, CvPcb, Pcbnew, and Footprint Editor
window menus.
* Add validator for environment variables.
* Make OK button the default action in the 3D viewer option dialog per UI
policy.
* Fix standard button sizer padding in 3D viewer options dialog.
* Let sizers do their job by using default size for 3D viewer options
dialog.
* Set 3D viewer hot key to Alt+3 in all parent windows where 3D viewer is
accessible.
* Minor code cleaning and coding policy fixes.
* Add footprint and drop table from the Pcbnew footprint library table menu
entry to make it clear to new users.
* Add component to the Eeschema library configuration menu entry.
* Fix default KISYSMOD/KISYS3DMOD (#ifdef typo) for OSX builds.
* Remove setting KIGITHUB from kicad/pcbnew Info.plist in favor of hardcoded default
setting for OSX builds.
* Remove now unneeded Set3DShapesDefaultPath() and other small things.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes) includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the DISPLAY_OPTIONS class instance.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
Also fix incorrect backannotation when footprint names contain spaces (put spaces in names is always a bad idea)
* Fix minor Bug #1349058 Choose component dialog: Search field loses focus after entering a character and internationalize the dialog.
* Fix a subtle bug which prevent eeschema to read the project config file when launched from kicad manager, and when kicad.pro is not found.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
In PATCH_COMMAND, use patch instead of bzr patch if patch or patch.exe is found (mandatory to use msys2 because bzr patch does not work when using msys2)
! The initial testing of this commit should be done using a Debug build so that
all the wxASSERT()s are enabled. Also, be sure and keep enabled the
USE_KIWAY_DLLs option. The tree won't likely build without it. Turning it
off is senseless anyways. If you want stable code, go back to a prior version,
the one tagged with "stable".
* Relocate all functionality out of the wxApp derivative into more finely
targeted purposes:
a) DLL/DSO specific
b) PROJECT specific
c) EXE or process specific
d) configuration file specific data
e) configuration file manipulations functions.
All of this functionality was blended into an extremely large wxApp derivative
and that was incompatible with the desire to support multiple concurrently
loaded DLL/DSO's ("KIFACE")s and multiple concurrently open projects.
An amazing amount of organization come from simply sorting each bit of
functionality into the proper box.
* Switch to wxConfigBase from wxConfig everywhere except instantiation.
* Add classes KIWAY, KIFACE, KIFACE_I, SEARCH_STACK, PGM_BASE, PGM_KICAD,
PGM_SINGLE_TOP,
* Remove "Return" prefix on many function names.
* Remove obvious comments from CMakeLists.txt files, and from else() and endif()s.
* Fix building boost for use in a DSO on linux.
* Remove some of the assumptions in the CMakeLists.txt files that windows had
to be the host platform when building windows binaries.
* Reduce the number of wxStrings being constructed at program load time via
static construction.
* Pass wxConfigBase* to all SaveSettings() and LoadSettings() functions so that
these functions are useful even when the wxConfigBase comes from another
source, as is the case in the KICAD_MANAGER_FRAME.
* Move the setting of the KIPRJMOD environment variable into class PROJECT,
so that it can be moved into a project variable soon, and out of FP_LIB_TABLE.
* Add the KIWAY_PLAYER which is associated with a particular PROJECT, and all
its child wxFrames and wxDialogs now have a Kiway() member function which
returns a KIWAY& that that window tree branch is in support of. This is like
wxWindows DNA in that child windows get this member with proper value at time
of construction.
* Anticipate some of the needs for milestones B) and C) and make code
adjustments now in an effort to reduce work in those milestones.
* No testing has been done for python scripting, since milestone C) has that
being largely reworked and re-thought-out.
Add missing calls to Show( false ) to some main frames (Kicad, eeschema, gerbview), to force config saving when closing these windows.
Code cleanup and minor coding style fixes in footprint_wizard_frame
To use multiple working threads. This entailed adding KiCad typedefs:
*) Add typedefs for MUTEX and MUTLOCK which mask the actual choices for the project.
*) Add FOOTPRINT_LIST::DisplayErrors( wxWindow* ) which is a single strategy for
showing aggregated load errors. Although what's there is only scaffolding
and needs a volunteer who knows HTML pretty well.
*) Ensure all callers of ReadFootprintFiles() use the new DisplayErrors() function.
*) Push utf8.cpp and utf8.h into common library for open use.
* Pcbnew: catch exceptions when saving changes to footprint library table.
* Pcbnew: update footprint viewer library list if open when footprint library
table changes.
* CvPcb: update library list when footprint library table changes.
* Minor coding policy fixes.
This response file is not expanded under mingw3 2 (mingw/gcc bug?), and the list of include paths, found in this file, is not taken in account.
Now, under mingw32+msys, when not cross-compiling, the response file is disabled.
Cvpcb, Pcbnew: fix a list of libs which should be added only when cross-compiling:
Previously, they were always added, which creates an issue with mingw/msy/ gcc 2.8.
Now they are added only when cross-compiling (this issue was noticeable only with msys+mingw version 2.8)
* Create a generic yes/no/cancel dialog from DIALOG_EXIT.
* Make DIALOG_EXIT return wxID_YES instead of wxID_OK so it is consistent
with the standard message dialogs.
* Add missing license to confirm.h and confirm.cpp.
* Change Eeschema message dialog when loading a schematic if the current
schematic is modified to be more consistent with the exit dialog.
* Change Pcbnew message dialog when loading a board if the current board
is modified to be more consistent with the exit dialog.
* Remove some Eeschema block debug logging code left over from my last
commit.
*) Set environment variable KISYSMOD before loading FP_LIB_TABLE so that
FP_LIB_TABLE::ROW::SetFullURI() can do substitution up front.
*) De-emphasize the lib path in some of the footprint frames but keep it
so the footprint editor can export a current library to another.
You can even export a GITHUB library to a pretty library for local
installation.
*) Start the PLUGIN options editor.
*) Enhance cursor positioning in DIALOG_FP_LIB_TABLE.
* Add save table and set project path environment variable code to
FP_LIB_TABLE object.
* Add code to Pcbnew and CvPcb to set project path environment variable.
* Create empty footprint table in Pcbnew when new board created.
* Save current project specific footprint library table to path on file save
as or empty project path.
* Fix a bug in Pcbnew in file save function that would silently overwrite
an existing board file.
* Disable selecting the current library in the module editor when there are
no libraries defined.
* Catch exceptions and report errors when writing footprint library tables.
* Fix Boost build CMakeFile to fix bug when bootstrapping a Boost build in
MSys.
* Add code to CvPcb to handle assigning component footprints from the
footprint library table instead of the search path method.
* Add code to CvPcb to allow editing of the footprint library table.
* CvPcb footprint and component panes display fully qualified FPID names.
* Make CvPcb library pane display footprint library table nicknames instead
of library file names.
* Add code to FP_LIB_TABLE object to test the paths in the table against the
list of libraries loaded from the project file.
* Add code to FP_LIB_TABLE to convert assigned footprints in a NETLIST from
legacy format to footprint library table format.
* Split out COMPONENT_NET, COMPONENT, and NETLIST objects from netlist_reader
files and create new pcb_netlist files.
* Fix minor wxListView scroll bar sizing issues.
* Add new token and code to save and load FPID nickname in board file.
* Add new token and code to save and load FPID nickname in s-expression net
list file.
* Add WX_STRING_REPORT object to dump strings to a wxString object.
* Use FPID instead of wxString in MODULE object.
* Use FPID instead of wxString when loading and saving files.
* Use FPID in COMPONENT object.
* Add wxString helper functions and comparison operators to FPID.
* Add fp_lib token to pcb and netlist file formats.
* Add code to load and save FPIDs to pcb file format.
* Fix segfault when deleting invalid footprint library tables in Pcbnew
in non footprint library table build.
* Fix bug when counting the number of mod files in
EDA_APP::SetFootprintLibTablePath();
* Remove defined CMAKE_INSTALL_PREFIX for Windows from main CMakeList.txt.
* Move footprint library path detection code from pcbnew.cpp to EDA_APP
object.
* Add CMAKE_INSTALL_PREFIX to config.h.cmake.
* Simplify and fix search path list code.
* Add CMAKE_INSTALL_PREFIX to the list of search paths in case KiCad was
installed using `make install`.
* Add default global footprint library table to CMake install.
* Add method to set footprint library table to PCB_BASE_FRAME object.
* Remove unused function EDA_APP::GetLibraryFile().
* Minor FP_LIB_TABLE object improvements.
*) add hotkey for setting the grid origin as 'S', in board editor, module editor.
*) re-position the function interface for cursor movement from BASE_SCREEN into
class EDA_DRAW_FRAME. This is a prelude to getting rid of BASE_SCREEN or
splitting it up.
* Fixed status bar update bug that caused the selected footprint information
to be overwritten.
* Remove unnecessary SetFocus() calls in list control OnChar() handlers.
* Change filtering from single selection to logically and each filter type.
* Remove clear filtering button and logic.
* Filter buttons now behave as true toggle buttons.
* Improve list control pane focus following when using arrow keys to change
list pane.
* Remove unused parameters from list box constructors.
* Make tab key behave like right arrow key when moving focus to next list
pane.
* Make list pane focus wrap around to next or previous control.
* Simplify component list filtering code.
* Improve status bar updating.
* Tell Bazaar to ignore .downloads-by-cmake instead of downloads-by-cmake.
* Add third list control with library names.
* Add button to toolbar to select filter by library name.
* Add bitmap for filter by library name toolbar button.
* Remove custom UI colors from list controls.
File "rules" has instructional text as comments near top.
2) Convert all text files in repo to LF line ending form.
Any checkout done with "rules" in play will convert the working
tree to native line ending, while keeping repo as LF line ending.
* Fix a bug when full file name and path are passed to FOOTPRINT_INFO::
ReadFootprintFiles() which I created in bug fix lp:593989.
* Fix a wxString debug assertion in EDA_APP::InitEDA_Appl() when the KICAD
environment variable is defined as an empty string.
* Add error dialog when libraries cannot be found in system search path
when loading footprint using the select footprint dialog.
* Add footprint library name column to the EDA_LIST_DIALOG when selecting
footprints from the list.
* Allow reading all columns from the selected row in EDA_LIST_DIALOG.
* Remove redundant sort from EDA_LIST_DIALOG constructor
* Add library name member variable and accessors to FOOTPRINT_INFO.
* Make headers translatable for Eeschema select component from list dialog.
* Add some helper methods to FPID for identifying the FPID type and validity.
* Remove a bunch of trailing whitespace and add missing license comments.
Adds "kicad_pcb" to the list of file-extensions for PCBnew in its Info.plist
to make Launch Services recognize the file associations.
Change 8 bit string to UTF8 so fancy mew in "um" can be shown.
* All items shapes are converted to polygons.
* Polygons are merged layer by layer (for calculation time reasons,zones are not merged)
* for copper layers, vias and pads holes are substracted from polygons (but, for calculation time reasons, not inside zones areas).
* the look is better, mainly when displaying the copper thickness
* solder and paste layers are now shown in 3D viewer.
* the code was seriously cleaned (but still needs to be enhanced).
* Note this is a work in progress which needs refinements.
This seems to me like the defacto standard for this menu command.
* Added a default filename for save as. Currently it's set to
"Unnamed file" using _() so its translatable.
* Changed the save dialog in PCBnew to use the path of the "original"
file as a base for the new file.
* Fix both legacy and s-expression netlist readers when footprints are
assigned in the netlist.
* Add some helper functions to NETLIST for detecting when footprints are set
or not set and when they have been changed while loading the .cmp file.
* Rename a few functions to improve their readability.
* Tweak the NETLIST_READER code to allow for component footprint names that
are not found in any library to generate a warning instead of an error and
update the board accordingly.
* Don't display undo warning in netlist dialog when dry run option selected.
* Rename netlist_reader_common.cpp to netlist_reader.cpp
* Rename netlist_reader_firstformat.cpp to legacy_netlist_reader.cpp
* Rename netlist_reader_kicad.cpp to kicad_netlist_reader.cpp
* Remove cvpcb/read_write_cmpfile.cpp and move the single function it
contained into cvframe.cpp
* Remove cvpcb/loadcmp.cpp and move the single function it contained into
class_DisplayFootprintsFrame.cpp.
* Remove cvpcb/readschematicnetlist.cpp and move the single function it
contained into cvframe.cpp.
* Remove cvpcb/setvisu.cpp and move the few functions it contained into
the appropriate source file.
* Create separate NETLIST object to hold contents of netlist files.
* Read entire netlist and footprint link files before making applying
changes to board.
* Add BOARD::ReplaceNetlist() function to eliminate the calls between the
NETLIST_READER, PCB_EDIT_FRAME, and BOARD objects.
* Change placement of new components below the center of the current board
or in the center of the page if the BOARD is empty.
* Add dry run option to netlist dialog to print changes to message control
without making changes.
* Add button to netlist dialog to allow saving contents of message control
to a file.
* Eliminate the need to compile netlist_reader_*.cpp in both CvPcb and Pcbnew.
* Add netlist_reader_*.cpp to the pcbcommon library.
* Remove redundant load component link file code from CvPcb.
* Modify CvPcb new to work with the new NETLIST_READER object.
* Add compare() function and < and == operators to FPID object.
* Add REPORTER class to hide an underlying string writing implementation for
use in low level objects. Thank you Dick for the idea.
* Lots of minor coding policy, Doxygen comment, and missing license fixes.
New classes:
- VIEW - represents view that is seen by user, takes care of layer ordering & visibility and how it is displayed (which location, how much zoomed, etc.)
- VIEW_ITEM - Base class for every item that can be displayed on VIEW (the biggest change is that now it may be necessary to override ViewBBox & ViewGetLayers method for derived classes).
- EDA_DRAW_PANEL_GAL - Inherits after EDA_DRAW_PANEL, displays VIEW output, right now it is not editable (in opposite to usual EDA_DRAW_PANEL).
- GAL/OPENGL_GAL/CAIRO_GAL - Base Graphics Abstraction Layer class + two different flavours (Cairo is not fully supported yet), that offers methods to draw primitives using different libraries.
- WX_VIEW_CONTROLS - Controller for VIEW, handles user events, allows zooming, panning, etc.
- PAINTER/PCB_PAINTER - Classes that uses GAL interface to draw items (as you may have already guessed - PCB_PAINTER is a class for drawing PCB specific object, PAINTER is an abstract class). Its methods are invoked by VIEW, when an item has to be drawn. To display a new type of item - you need to implement draw(ITEM_TYPE*) method that draws it using GAL methods.
- STROKE_FONT - Implements stroke font drawing using GAL methods.
Most important changes to Kicad original code:
* EDA_ITEM now inherits from VIEW_ITEM, which is a base class for all drawable objects.
* EDA_DRAW_FRAME contains both usual EDA_DRAW_PANEL and new EDA_DRAW_PANEL_GAL, that can be switched anytime.
* There are some new layers for displaying multilayer pads, vias & pads holes (these are not shown yet on the right sidebar in pcbnew)
* Display order of layers is different than in previous versions (if you are curious - you may check m_galLayerOrder@pcbnew/basepcbframe.cpp). Preserving usual order would result in not very natural display, such as showing silkscreen texts on the bottom.
* Introduced new hotkey (Alt+F12) and new menu option (View->Switch canvas) for switching canvas during runtime.
* Some of classes (mostly derived from BOARD_ITEM) now includes ViewBBox & ViewGetLayers methods.
* Removed tools/class_painter.h, as now it is extended and included in source code.
Build changes:
* GAL-based rendering option is turned on by a new compilation CMake option KICAD_GAL.
* When compiling with CMake option KICAD_GAL=ON, GLEW and Cairo libraries are required.
* GAL-related code is compiled into a static library (common/libgal).
* Build with KICAD_GAL=OFF should not need any new libraries and should come out as a standard version of Kicad
Currently most of items in pcbnew can be displayed using OpenGL (to be done are DIMENSIONS and MARKERS).
More details about GAL can be found in: http://www.ohwr.org/attachments/1884/view-spec.pdf
the crosshair after zooming.
This method is only used when the ALT key is held while using the mousewheel or
if it's permanently enabled in the options dialog next to the middle mouse
button panning option.
Pcbnew: in netlist dialog: The user now can choose between the netlist and the .cmp file to import footprints names.
Therfore no need to delete the .cmp file when exists to use only the netlist.
This is useful for users who use CvPcb only once to fill footprints fields in schematic, and after edit/modify the footprints fields in schematic outside CvPcb.
* Improve MSG_PANEL_ITEM to handle message panel information.
* Create containers for passing message panel items between objects and
the message panel.
* Rename EDA_ITEM::DisplayInfo to EDA_ITEM::GetMsgPanelInfo.
* Remove all direct manipulation of EDA_DRAW_FRAME from all objects derived
from EDA_ITEM.
their type, by using the more abstract PLUGIN::Footprint*() functions.
This is an intermediate phase only, other changes will be necessary as library table support comes in.
Encapsulate usage of library path searching, since that will go away as library table support comes in.
Add FOOTPRINT_EDIT_FRAME::{get,set}LibPath() and FOOTPRINT_EDIT_FRAME::{get,set}LibNickName() functions
to provide this encapsulation.
jean-pierre charras
Maciej Suminski
Jeff Young
Tomasz Wlostowski
John Beard
Seth Hillbrand
Wayne Stambaugh
Jon Evans
Michael Kavanagh
Martin Sivak
Baranovskiy Konstantin
Chris Pavlina
Camille
Simon Richter
Fabrizio Tappero
Dick Hollenbeck
Oliver Walters
Mrio Luzeiro
Matthew Petroff
Wayne Stambaugh
Cirilo Bernardo
Simon Wells
Cirilo Bernardo
Cirilo Bernardo
Mario Luzeiro
Damien Espitallier
Simon Wells
Jon Neal
Bernhard Stegmaier
unknown
Michael Narigon
Lorenzo Marcantonio
Marco Serantoni
Brian Sidebotham
Michal Jahelka
Felix Morgner
Emmeran
Alexander Lunef
marco.