61bdee027b
Fix a crash when using length tuning tools.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/15874
2023-10-14 16:53:28 +03:00
d10b0b053e
Move meander placer picker tool from item highlighting to net highlighting.
2023-10-09 22:32:32 +01:00
546c7ed218
Introduce GENERATOR_TOOL.
2023-10-08 02:41:17 +00:00
22b733209d
Fail GAL on its header leaking audit
...
Maybe we should rethink directly accessing GAL so much, but at least 600 files didn't need GAL leaked into them due to view_overlay.h
2023-09-18 19:52:27 -04:00
2b78c20a62
PCB: add grid overrides to graphics/router/etc.
2023-08-24 13:58:22 -04:00
76cd637895
Make the net identifier opaque to PNS router.
...
This also improves performance as we don't have to look up the
netcodes in a map.
2023-08-22 15:17:02 +00:00
a77e630901
ADDED: Connectivity for graphic shapes on copper layers
...
Graphic shapes (excluding text) can now have nets when on
copper layers. Shapes behave like tracks in that they will
pick up nets from connected pads, and follow track opacity
settings.
2023-08-10 21:47:43 -04:00
d040690f60
Ease acquisition of a target item.
...
pickSingleItem() had a two-attempt algorithm, but the second attempt
was never made because we'd check for no hits before throwing out the
aAvoidItems.
The second attempt would fail anyway because QueryHoverItems() ignored
the aUseClearance flag when not idle, and didn't factor in the actual
clearance.
2023-04-09 22:05:17 +00:00
0ff6cb49d6
router: When dragging tracks, don't snap to parts of the original line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10113
2023-01-27 11:06:36 +03:00
dfb1068358
router: improve heuristic to avoid segment drag 'flickery snapping'
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10113
2022-12-29 17:54:31 +01:00
008704fc6f
router: Allow highlighting both DP nets when routing.
2022-12-06 05:24:23 +03:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
7c83c78afe
Allow free pad usage in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11730
2022-09-06 13:59:52 +01:00
0cb5abd7f7
Fix highlight on route again
...
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
0bd7f603a3
router: consider mouse drag event a valid route start/end event
...
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
5e4a704155
Remove some more duplicated preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
965ab42938
router: when dragging segments, don't snap to other segments on the same layer. Fixes drag flickering for short segments.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/9720
2021-12-15 01:48:04 +01:00
302c5ab537
Fix an issue created by commit 9e3362d1.
...
the issue was the graphic cursor was locked on the first snap point
in route mode, once a snap point is found.
2021-11-21 15:37:03 +01:00
9e3362d14c
Snap mouse point before picking startItem.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9700
2021-11-20 13:44:16 +00:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
7cb2d19814
Honour alt-means-disable-grid-snapping in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
7b347d793b
Change gears on no-connect net generation. See bug rpt.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
f2ac6fcd44
Treat net 0 items as each being in their own net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
ce3b2921bd
Sort potential start candidates by distance from cursor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
2020-11-10 23:50:57 +00:00
843974b0bf
Cleanup and formtting.
2020-10-31 15:50:06 +00:00
9656bd310b
Remove eda_item and gr_basic from eda_text.h
2020-10-13 22:46:39 -04:00
f8875bc5a6
Move std::contains to alg::contains.
2020-09-26 14:42:40 +01:00
d7e80f8008
Add std::contains() to simplify a lot of code.
2020-09-26 12:40:32 +01:00
f493e270ea
ADDED: Menu option to enable/disable snap to grid
...
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
2020-09-10 20:09:30 -07:00
7cd8f710b6
Clean up unused includes.
2020-08-08 16:25:30 +01:00
5d118b0700
More visibility settings infrastructure
...
ADDED: Three-state high contrast mode action
ADDED: Save contrast mode in local settings
Also some initial infrastructure for layer presets
2020-07-11 21:59:07 -04:00
2cfd6ba978
Fix a couple of integer overflows.
2020-07-02 22:52:37 +01:00
47ab7c78a6
Divorce GRID_HELPER from the parent frame.
...
This moves GRID_HELPER fully into the tool framework.
2020-06-13 22:44:16 +01:00
c7daf8a8f3
ADDED: Cross-probe highlighting of bus members
...
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
2020-05-24 13:30:23 -04:00
6692935808
Consolidate common viewer actions across cvpcb and pcbnew frames
...
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
2020-05-24 11:58:33 +01:00
51eac3e3e6
Split pcbnew and footprint editor settings getters for clarity
2020-05-05 21:46:00 -04:00
Alex Shvartzkop
Jeff Young
Marek Roszko
Mike Williams
Jon Evans
Tomasz Wlostowski
Seth Hillbrand
jean-pierre charras
Wayne Stambaugh
Ian McInerney