Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
In .gbrjob file, one can specify the thickness and color of some layers.
Currently, there is no way to enter these parameters.
This commit prepare a better support of .gbrjob files.
Prevent the symbol and footprint library table editors from substituting
the current project path (${KIPRJMOD}) when adding libraries to the global
library table. This will almost assuredly fail when opening a different
project. We still allow users to manually use ${KIPRJMOD} in global table
paths under the assumption that if they are typing this in then they most
likely understand environment variable substitution.
Fixes lp:1830694
https://bugs.launchpad.net/kicad/+bug/1830694
Significant improvement in fetch time for item clearances. On large
boards with lots of nets, maybe 10% faster zone fills and about
2x speedup on track-to-track DRC.
It's too complicated trying to keep everything smaller or larger by
half the pen width, and some things like spoke-end-detection need the
actual outline anyway.
The thermal spokes are anchored at the pad anchor. They may or may
not make sense, depending on the pad shape. It's up to the author
to move the anchor around as necessary or to not use thermals.
This assumes maximum registration errors are a vector, rather than
an amount in both x and y axes. Lots more disucssion in the bug
report and on the forum (link in the bug report).
Also makes large changes to the painting of pads, but they now use
the same code as plotting, so if there are any changes then they
were errors before since plotting represents "truth".
Fixes: lp:1563744
* https://bugs.launchpad.net/kicad/+bug/1563744
Oblong holes (slots) use now a aperture attribute similar to round holes.
(The previous attribute "slot" is now deprecated)
However they have a specific aperture, and a comment is added in drill files for these apertures.
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
Footprint library nicknames are case sensitive but the comparison for
the library tree control was case insensitive.
Also make the footprint name comparisons case sensitive as well. While
not strictly necessary, the plan is to start using the name defined in
the footprint file instead of the file name which will allow for case
sensitivity.
Fixes lp:1833701
https://bugs.launchpad.net/kicad/+bug/1833701
(cherry picked from commit d8fff5c820)
The previous commit missed a case where the number was so large that it
overflowed the integer invalidating the comparison. This protects
against that case by using floating point comparison.
(cherry picked from commit f25ae373bb)
This checks the movement against a maximum value that would place the
selection outside of the valid area for the footprint or board.
Fixes: lp:1833478
* https://bugs.launchpad.net/kicad/+bug/1833478
(cherry picked from commit 845833e8fd)
A few files snuck in with CRLF for the line endings. These make it hard
to look at diffs as every line appears to have changed. This commit
makes only line ending changes, so can be ignored
Custom pads are referenced to the anchor pad 0-point, so flipping the
polygon should be about 0 and not the flip point.
Fixes: lp:1831311
* https://bugs.launchpad.net/kicad/+bug/1831311
(cherry picked from commit 909a25c147)
The returns of KiCad file extensions on GTK contain basic regex matching
case-insensitive file extensions. We need to match these in the
provider and tests
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
Especially, small round rect pads have a ugly shape because the number of segments is
small and the 90 deg arcs are not very well approximated.
The minimal seg count for 90 deg arcs is now 4 (16 segm/circle) for pads.
Fixes: lp:1833005
https://bugs.launchpad.net/kicad/+bug/1833005
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Set the IS_NEW flags so the POINT_EDITOR doesn't try an poke its head
in, and apply the EE_SELECTION_TOOL hack for mouse clicks leaking
through to the underlying tools.
Fixes: lp:1832911
* https://bugs.launchpad.net/kicad/+bug/1832911
Instead of linking the same target name and re-building, we can install
the file to a new name. This speeds the build process and keeps linking
routines from stepping on each other. Available now that we are at
CMake 3.0.2
Fixes: lp:1789468
* https://bugs.launchpad.net/kicad/+bug/1789468
This adds the upper-case version of files names to the selection box for
filesystems that support case-sensitive file names.
Fixes: lp:1832853
* https://bugs.launchpad.net/kicad/+bug/1832853
Prevents certain edit tools from handling the action unless the cursor
remains inside the selection bounding box.
For now this is a UX test but the behavior may be expanded into Eeschema
as well.
Fixes: lp:1827242
* https://bugs.launchpad.net/kicad/+bug/1827242
Deleting objects from a container will invalidate the iterator that
contains the object. Correct deleting requires capturing the iterator
returned by the erase function.
Fixes: lp:1832331
* https://bugs.launchpad.net/kicad/+bug/1832331
Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
* Circular gal<->common dependency bites again. Add 'common'
again to the 'kicad' target's link libraries. libgal.a depends
on SHAPE_POLY_SET in common, but common depends on gal. This is
not a real fix, but it unsticks Linux compilations. Fixing the
circular dep is an existing bug: https://bugs.launchpad.net/kicad/+bug/1832229
* Missing LEGACY_HK_NAME for ACT_EndTuning: this was probably accidentally
allowed on some other platform due to different wxString constructors.
On Linux/GCC, it breaks.
* Unused include from /kicad in export_vrml.cpp. This is not findable
on Linux, as pcbnew does not include the right dirs for this to be
found. But it's not used, so just remove it.
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
This mixes the de-emphasized layers into the background color rather
than merely a black color. This also keeps some of the original layer
color.
Fixes: lp:1831316
* https://bugs.launchpad.net/kicad/+bug/1831316
Mouse capture end is called by some actions such as save board. This
resets the cursor image but doesn't change the current tool. Resetting
the cursor image during action prevents this.
(cherry picked from commit 35e87128f5)
Fixes: lp:1831888
* https://bugs.launchpad.net/kicad/+bug/1831888
This standardizes the import vector graphics file dialog to use the
sbSizer titles instead of bold+lines. Tooltip changes will be in the
next change as we don't change strings for bugfix releases and this
commit is targeted for 5.1.3
Fixes: lp:1823462
* https://bugs.launchpad.net/kicad/+bug/1823462
This bug was seen only with some shapes, not all, and only for layers having a negative margin.
Fixes: lp:1831941
https://bugs.launchpad.net/kicad/+bug/
Building custom targets that depend on custom commands such as our
keyword lexer requires two layers of indirection to pick up changes
properly and not overwrite the same file in parallel builds.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
* Remove infinite recursion calls in footprint.i
* Extend DRAWINGS deque iterator to auto cast contained BOARD_ITEMS,
similar to what dlist implementation did.
When exiting pcbnew, we only want to run the sections of ClearPcb that
remove the old pcb data. We do not want to queue events that handle
initializing a new pcb. These were caught after freeing memory in some
cases, leading to segfaults.
Fixes: lp:1831560
* https://bugs.launchpad.net/kicad/+bug/1831560
The dynamic ratsnest is shown while moving items but this needs to be
hidden after cancelling. Previously this was handled by the
SelectionClear event but we've changed this to (correctly) keep the
previous selection when canceling.
Fixes: lp:1831350
* https://bugs.launchpad.net/kicad/+bug/1831350
Fixes a few commit issues based on the std:: rework. Add an option to
delete tracks fully in pads and makes merge tracks smarter
Fixes: lp:1787190
* https://bugs.launchpad.net/kicad/+bug/1787190
Grid and ratsnest visibility are stored in the board file and should not
be changed without the user explicitly modifying them.
In the future, we'll move these settings out of the board file but we
shouldn't cause extra file-churn for flipped bits.
Fixes: lp:1828285
* https://bugs.launchpad.net/kicad/+bug/1828285
We have _two_ settings that independently control whether the netlist is
updated by timestamp. One in the NETLIST object and one in the
NETLIST_UPDATER object. It looks like we are phasing one out but the
commit was not complete.
Fixes: lp:1828754
* https://bugs.launchpad.net/kicad/+bug/1828754
Also fixes the post-duplicate move to start at the cursor pos.
Also fixes the fact that duplicate wasn't getting its hotkey.
Fixes: lp:1830596
* https://bugs.launchpad.net/kicad/+bug/1830596
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
Always check the return value of PyRun_SimpleString() for errors when a
Python script is run and show an error message rather than fail silently.
Enable Python interpreter I/O redirection in debug builds so that script
string errors will be shown when PyRun_SimpleString() is called.
Do not call PyErr_Print() after a PyRun_SimpleString() call failure. It
doesn't do anything useful.
Do not call Py_Finalize() after a PyRun_SimpleString() call failure. It
seems to cause Pcbnew to crash.
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
The no-connect net (0) should never drive the net of a cluster.
Otherwise, tracks connecting between unconnected pads and connected pads
can acquire net 0 incorrectly.
Sometimes we want to inflate a polygon without adding rounded edges.
This add the option using the jtMiter setting.
This is used in the Eagle parser to expand the Eagle zones for KiCad.
Eagle Zones are drawn on the polygon edge, so they extend out from the
outline. KiCad zones are drawn inside the polygon. We need to both
increase the zone size and decrease the minimum pen width to account for
this.
Fixes: lp:1817312
* https://bugs.launchpad.net/kicad/+bug/1817312
Eagle parsing allows pin 1 to be different from the other pins in the
package but this is set by a tag marking the pin as "first" rather than
the actual number of the pin.
Fixes: lp:1829251
* https://bugs.launchpad.net/kicad/+bug/1829251
Some how a board object was required to fetch the line width when a
footprint is being parsed. The problem is that there is no board
defined when loading Eagle footprint libraries so there was a nullptr
segfault as a result. When there is no board defined, use the default
KiCad layer line widths.
Fixes lp:1829243
https://bugs.launchpad.net/kicad/+bug/1829243
Jeff Young
Tomasz Włostowski
jean-pierre charras
Wayne Stambaugh
Seth Hillbrand
Ian McInerney
Steven A. Falco
Seppe Stas
John Beard
qu1ck
Jon Evans
Michael Kavanagh